Filter by
Bristle Flexibility
DFARS Compliance
Thread Type
Handle Tip Material
About Brushes
More
Extra-Strength Threaded Handles
D
These handles are metal or metal-tipped for improved strength over wood.
Steel handles are the strongest.
Handle | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Style | Material | Color | Lg. | Dia. | Tip Material | 1-11 | 12-Up | |
| D | Plastic-Coated Steel | Black | 60" | 15/16" | Aluminum | 0000000 | 000000 | 000000 |
Wet-Mop Handles
Adjustable Bar
Clamp Jaw
Adjustable Bar—Loosen the nut, slide the center bar up, insert mop head between the bar and the handle end, and retighten the nut.
Clamp Jaw—Plastic jaws clamp down on wide headbands for a secure hold. Turn the adjustment sleeve to loosen the jaws, insert the mop's headband between the jaws, and retighten the sleeve.
Dust-Mop Handles
Steel handles are lightweight.
Handle | 60" Lg. | ||
|---|---|---|---|
| Color | Dia. | Each | |
Snap On | |||
Steel | |||
| Blue | 1" | 00000000 | 000000 |
Threaded-Shank Low-Scratch Tube Brushes
Nylon Bristles, 8" Brush Dia. and Larger
Tampico Bristles
Attach the shank to a handle or power tool. Use these brushes to clean delicate surfaces inside tubes, pipes, and holes. The bristles won't leave behind debris that could cause rust on your workpiece.
Tampico and cotton bristles are good for sweeping away dust or applying lubricants and polishing compounds.
Nylon bristles are recommended for use around acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | Stem | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Shape | Dia. | Flexibility | No. of Spirals | No. of Wires | Wire Material | O'all Lg. | Max. Speed, rpm | For Use With | 1-11 | 12-Up | |
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | |||||||||||||
1/4 NPT Male Threaded Shank | |||||||||||||
| 8" | 6" | Round | 0.030" | Flexible | 1 | 4 | Galvanized Steel | 9 1/8" | 1,200 | Drills, Grinders for Bits and Burs | 00000000 | 000000 | 000000 |
| 8" | 6" | Square | 0.030" | Flexible | 1 | 4 | Galvanized Steel | 9 1/8" | 1,200 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 12" | 6" | Round | 0.030" | Flexible | 1 | 4 | Galvanized Steel | 9 1/8" | 1,200 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 18" | 6" | Round | 0.030" | Flexible | 1 | 4 | Galvanized Steel | 9 1/8" | 1,200 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 18" | 6" | Square | 0.030" | Flexible | 1 | 4 | Galvanized Steel | 9 1/8" | 1,200 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 24" | 6" | Round | 0.060" | Flexible | 1 | 4 | Galvanized Steel | 9 1/8" | 1,200 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
| 24" | 6" | Square | 0.060" | Flexible | 1 | 4 | Galvanized Steel | 9 1/8" | 1,200 | Drills, Grinders for Bits and Burs | 00000000 | 00000 | 00000 |
Tampico Bristles—For Use On Steel, Stainless Steel, Titanium, Aluminum, Brass, Bronze, Copper, Plastic | |||||||||||||
1/4 NPT Male Threaded Shank | |||||||||||||
| 1 1/4" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 0000 |
| 1 1/2" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 0000 |
| 1 3/4" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 0000 |
| 2" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 0000 |
| 2 1/4" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 00000 |
| 2 1/2" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 00000 |
| 2 3/4" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 00000 |
| 3" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 00000 |
| 3 1/2" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 00000 |
| 4" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 00000 |
| 5" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 00000 |
| 6" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 00000 |
| 7" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 00000 |
| 8" | 4 1/2" | Round | __ | Flexible | 1 | 2 | Galvanized Steel | 8" | __ | __ | 0000000 | 00000 | 00000 |
Threaded-Shank Tube Brushes
Steel Bristles
Attach the shank to a handle or power tool. Use to remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | Stem | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Shape | Dia. | Flexibility | No. of Spirals | No. of Wires | Wire Material | O'all Lg. | Max. Speed, rpm | For Use With | Features | 1-11 | 12-Up | |
Steel Bristles—For Use On Steel, Plastic | ||||||||||||||
1/4 NPT Male Threaded Shank | ||||||||||||||
| 4" | 4 1/2" | Round | 0.018" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 1/4" Dia. Loop Tip | 0000000 | 000000 | 000000 |
| 4 1/2" | 4 1/2" | Round | 0.018" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 1/4" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 5" | 4 1/2" | Round | 0.018" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 5 1/2" | 4 1/2" | Round | 0.018" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 6" | 4 1/2" | Round | 0.018" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 6" | 6" | Square | 0.028" | Rigid | 1 | 4 | Galvanized Steel | 8 5/8" | __ | __ | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 6 1/2" | 4 1/2" | Round | 0.018" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 7" | 4 1/2" | Round | 0.028" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 7" | 6" | Square | 0.028" | Rigid | 1 | 4 | Galvanized Steel | 8 5/8" | __ | __ | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 8" | 4 1/2" | Round | 0.028" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 8" | 6" | Square | 0.028" | Rigid | 1 | 4 | Galvanized Steel | 8 5/8" | __ | __ | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 8 1/2" | 4 1/2" | Round | 0.028" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 9" | 4 1/2" | Round | 0.028" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 10" | 4 1/2" | Round | 0.028" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 10" | 6" | Square | 0.028" | Rigid | 1 | 4 | Galvanized Steel | 8 5/8" | __ | __ | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 11" | 4 1/2" | Round | 0.028" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 12" | 4 1/2" | Round | 0.028" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
| 13" | 4 1/2" | Round | 0.028" | Rigid | 2 | 4 | Galvanized Steel | 7 1/2" | 1,200 | Drills, Grinders for Bits and Burs | 5/8" Dia. Loop Tip | 0000000 | 00000 | 00000 |
Handles for Threaded-Shank Tube Brushes
B
Add length to your brush or get a better grip.
For technical drawings and 3-D models, click on a part number.
Thread | Stem | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Type | Gender | Dia. | O'all Lg. | Material | Flexibility | Handle Material | Each | ||
T-Handle | ||||||||||
| B | 1/4 | NPT | Female | 1/4" | 6 3/8" | Steel | Rigid | Wood | 0000000 | 000000 |