About Lubricants
More
Tacky-Surface Retrievers
Pick up flat and lightweight objects with the tacky surface of these retrievers. They only need to make contact with one part of an object to stick. You can wash the adhesive pad to reuse it. The telescoping shaft adjusts to extend your reach. To access hard-to-reach material from any angle, the head pivots.
Erasers
Remove smudges, mistakes, and stray marks.
Kneaded rubber erasers absorb graphite, charcoal, carbon, and pastels to lift or blend colors and add highlights. Also known as gummy erasers and putty rubber, they are often used for architectural or engineering drawings. Mold them into any shape for use on large areas or for detail work. Unlike other erasers, these won’t leave residue behind or wear down, so they last longer. To clean them, knead until the pigment is absorbed into the rubber. Discard them when the eraser becomes hard.
Protective Covers for Conveyor Rollers
Reduce noise, absorb impact, and extend roller life. The higher the hardness rating, the longer the covers will protect rollers in demanding applications.
Slide-on covers slip over the roller. For easier installation, use lubricant and an air nozzle.
Polyurethane has a high-friction surface for high speeds and inclines.
FDA-compliant covers are safe to use for conveying food and beverages
Lubricant is water based and loses its lubrication properties upon drying to ensure covers retain a snug fit.
Connect air nozzles to a source of compressed air to create a cushion for sliding covers onto the roller.
For technical drawings and 3-D models, click on a part number.
Covers | Air Nozzles | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Roller Dia. | Wd., ft. | Thick. | Hardness | Hardness Rating | Specifications Met | Pkg. Qty. | Pkg. | Each | ||
Polyurethane Rubber | ||||||||||
Black | ||||||||||
| 1 3/8" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 0000000 | 000000 | 0000000 | 0000000 |
| 1.9" | 5 | 1/16" | Durometer 85A | Hard | __ | 1 | 00000000 | 00000 | 0000000 | 000000 |
| 1.9" | 5 | 1/8" | Durometer 70A | Hard | FDA Compliant 21 CFR 177.1680, FDA Compliant 21 CFR 177.2600 | 1 | 00000000 | 00000 | 0000000 | 000000 |
| 1.9" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 0000000 | 00000 | 0000000 | 000000 |
| 2" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 0000000 | 00000 | 0000000 | 000000 |
| 2 1/2" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 0000000 | 00000 | 0000000 | 000000 |
| 2 3/4" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 00000000 | 00000 | 00000000 | 000000 |
Orange | ||||||||||
| 3/4" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 0000000 | 00000 | 0000000 | 000000 |
| 1 3/8" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 0000000 | 00000 | 0000000 | 000000 |
| 1.9" | 5 | 1/16" | Durometer 85A | Hard | __ | 1 | 00000000 | 00000 | 0000000 | 000000 |
| 1.9" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 0000000 | 00000 | 0000000 | 000000 |
| 1.9" | 5 | 1/4" | Durometer 85A | Hard | __ | 1 | 00000000 | 00000 | 0000000 | 000000 |
| 2" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 0000000 | 00000 | 0000000 | 000000 |
| 2 1/2" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 0000000 | 00000 | 0000000 | 000000 |
| 2 1/2" | 5 | 1/4" | Durometer 85A | Hard | __ | 1 | 00000000 | 000000 | 0000000 | 000000 |
| 3 1/2" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 0000000 | 00000 | 0000000 | 000000 |
Green | ||||||||||
| 1.9" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 00000000 | 00000 | 0000000 | 000000 |
| 2 1/2" | 5 | 1/8" | Durometer 85A | Hard | __ | 1 | 00000000 | 00000 | 0000000 | 000000 |
| Lubricant (32 oz. Spray Bottle) | 0000000 | Each | 000000 |
V-Belts for V-Groove Conveyor Rollers
Replace worn and broken V-belts. Also known as Poly-V belts.
For technical drawings and 3-D models, click on a part number.
Belt | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Trade No. | Trade Size  | No. of Bands | For Roller Spacing | For Hub Dia., mm | Cap., lbs./ft. | Material | Color | Each | |
For 1.9" Roller Dia. | |||||||||
| 2PJ246 | J | 2 | 2 1/4" | 43 | 400 | Polyurethane | Black | 000000 | 00000 |
| 2PJ263 | J | 2 | 2 1/2" | 43 | 400 | Polyurethane | Black | 000000 | 0000 |
| 2PJ286 | J | 2 | 3" | 43 | 400 | Polyurethane | Black | 000000 | 0000 |
| 2PJ336 | J | 2 | 4" | 43 | 400 | Polyurethane | Black | 000000 | 0000 |
| 2PJ376 | J | 2 | 4 3/4" | 43 | 400 | Polyurethane | Black | 000000 | 0000 |
| 3PJ246 | J | 3 | 2 1/4" | 43 | 600 | Polyurethane | Black | 0000000 | 0000 |
| 3PJ263 | J | 3 | 2 1/2" | 43 | 600 | Polyurethane | Black | 0000000 | 0000 |
| 3PJ286 | J | 3 | 3" | 43 | 600 | Polyurethane | Black | 0000000 | 0000 |
| 3PJ336 | J | 3 | 4" | 43 | 600 | Polyurethane | Black | 0000000 | 0000 |
| 3PJ376 | J | 3 | 4 3/4" | 43 | 600 | Polyurethane | Black | 0000000 | 00000 |
| 4PJ246 | J | 4 | 2 1/4" | 43 | 800 | Polyurethane | Black | 0000000 | 0000 |
| 4PJ263 | J | 4 | 2 1/2" | 43 | 800 | Polyurethane | Black | 0000000 | 00000 |
| 4PJ286 | J | 4 | 3" | 43 | 800 | Polyurethane | Black | 0000000 | 00000 |
| 4PJ336 | J | 4 | 4" | 43 | 800 | Polyurethane | Black | 0000000 | 00000 |
| 4PJ376 | J | 4 | 4 3/4" | 43 | 800 | Polyurethane | Black | 0000000 | 00000 |
Food Industry Magnetic Latches
Made to NSF/ANSI standards, this latch has a completely sealed magnet to eliminate crevices that can trap food particles. Magnetic force holds doors closed.
Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Pull Strength, lbs. | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Mounting Hole Diameter, mm | Material | Ht. | Wd. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Specifications Met | Each | ||
Light Gray Rubber | |||||||||||||||
| 2 | 4 | 11/16" | 1 3/4" | 1/4" | 1 1/16" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 000000 |
| 2 | 8 | 11/16" | 2" | 1/4" | 1 1/4" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
Dark Gray Rubber | |||||||||||||||
| 2 | 4 | 11/16" | 1 3/4" | 1/4" | 1 1/16" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
| 2 | 8 | 11/16" | 2" | 1/4" | 1 1/4" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
Blue Rubber | |||||||||||||||
| 2 | 4 | 11/16" | 1 3/4" | 1/4" | 1 1/16" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
| 2 | 8 | 11/16" | 2" | 1/4" | 1 1/4" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |