McMaster-Carr logo
    Filter by
    System of Measurement
    Construction
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Breaking Strength
    DFARS Specialty Metals
    For I-Beam Flange Width
    Mount Type
    For I-Beam Flange Thickness
    Mounting Location
    Number of Mounting Holes
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    27 Products

    Wrap-Around Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors.
    Image of Product. Webbing. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing.
    Image of Product. Webbing with Cinching Buckle. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing with Cinching Buckle.

    Webbing

    Webbing with Cinching

    Buckle

    Image of Product. Wire Rope. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope.
    Image of Product. Wire Rope with Roller Cable and Carabiner. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope with Roller Cable and Carabiner.

    Wire Rope

    Wire Rope with Roller Cable and

    Carabiner

    Move these anchors between work sites—they loop around beams, rails, and other approved structures. They’re quick to install and don’t require any tools. Plus, they won’t damage your anchoring surface. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Wraparound
    Image of Product. Webbing. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing.
    Image of Product. Webbing with Cinching Buckle. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Webbing with Cinching Buckle.

    Webbing

    Webbing with Cinching

    Buckle

    Image of Product. Wire Rope. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope.
    Image of Product. Wire Rope with Roller Cable and Carabiner. Front orientation. Fall-Arrest Anchors. Wrap-Around Fall-Arrest Anchors, Wraparound, Wire Rope with Roller Cable and Carabiner.

    Wire Rope

    Wire Rope with Roller Cable and

    Carabiner

    Wire Rope—Wire rope anchors resist cuts and abrasion better than webbing anchors, so they last longer.
    Cinching Buckle—Anchors with a cinching buckle, also known as boom straps, are designed to be attached to the arm of a bucket truck. Tighten them for a snug, nonslip fit.
    Roller Cable—Anchors with a roller cable are a good choice when you have to move back and forth while staying tethered. Use the included carabiner to attach the two loop ends together.
    Nylon Liner—Webbing anchors with a nylon liner have an extra layer to protect the webbing from wear and tear.
    Lg.,
    ft.
    Material
    Liner
    Material
    Connection Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Webbing
    3Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000
    6Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000
    12Polyester FabricNylon
    		D-Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000
     
    Webbing with Cinching Buckle
    4Polyester Fabric—D-Ring5,000350ANSI/ASSP A10.32, ANSI/ASSP Z359.10000000000000
     
    Wire Rope
    4Steel—Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000
    6Steel—Ring × Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000
     
    Wire Rope with Roller Cable and Carabiner
    6Steel—Reinforced Loop × Reinforced Loop5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000
     

    Electrical Arc-Flash-Resistant Wrap-Around Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Electrical Arc-Flash-Resistant Wrap-Around Fall-Arrest Anchors.
    Made of Kevlar, these anchors withstand high heat and electrical arcs that would weaken a standard webbing anchor. They’ve been tested against the highest level of electrical arc-flash hazards to meet ASTM F887. Loop them around beams, rails, and other approved structures—they’re easy to move between work sites. Their webbing construction makes them lightweight and flexible. Plus, they won’t damage the anchoring surface. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Wraparound
    Lg.,
    ft.
    Material
    Connection Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Webbing
    4KevlarD-Ring × Webbing Loop5,000425ANSI/ASSP Z359.18, ASTM F887, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.50200000000000000
     

    I-Beam Fall-Arrest Anchors

    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors.
    Image of Product. Stationary. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Stationary.
    Image of Product. Mobile with Roller Bearings. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Mobile.

    Stationary

    Mobile with Roller Bearings

    Image of Product. Mobile. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Mobile.

    Mobile

    Clamp these anchors onto I-beams—they give you a secure place to clip your fall-arrest lanyard without damaging the beam surface. Plus, they’re reusable and don’t require tools to install and remove. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Clamp On
    Image of Product. Stationary. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Stationary.
    Image of Product. Mobile with Roller Bearings. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Mobile.

    Stationary

    Mobile with Roller Bearings

    Image of Product. Mobile. Front orientation. Fall-Arrest Anchors. I-Beam Fall-Arrest Anchors, Clamp On, Mobile.

    Mobile

    Stationary—Stationary anchors mount to horizontal and vertical I-beams. They’re great when working in a single location.
    Mobile—Mobile anchors move with you, so you’re free to work along the length of the beam.
    Roller Bearings—Those with roller bearings are best when you need to move back and forth frequently. They roll along the beam with less effort than with other mobile anchors.
    Bronze Insert—Those with bronze inserts glide smoothly for easy movement.
    For I-Beam
    Flange
    Wd.
    Thk.
    Material
    Insert
    Material
    Connection
    Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Stationary
    4" to 14"1 1/2"Stainless Steel—D-Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000000
     
    Mobile
    3 1/2" to 14"1 1/4"Aluminum—D-Ring5,000400ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
    12" to 30"2 1/2"AluminumBronzeD-Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000
     
    Mobile with Roller Bearings
    4" to 14"1 1/8"Stainless Steel—D-Ring5,000310ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000
     

    Seismic Bracing Mounts

    Image of System. Angle Iron Mount. Front orientation. Contains Annotated. Seismic Bracing Mounts. Seismic Bracing Mounts.
    Image of System. Ceiling Mount. Front orientation. Contains Annotated. Seismic Bracing Mounts. Seismic Bracing Mounts.

    Angle Iron Mount

    Ceiling Mount

    Image of System. Beam Mount. Front orientation. Contains Annotated. Seismic Bracing Mounts. Seismic Bracing Mounts.

    Beam Mount

    These OSHPD preapproved anchors and brackets support threaded-rod-mount hangers during seismic activity. A complete seismic bracing mount system consists of an upper bracket, a lower bracket, and strut or pipe (sold separately). Brackets work with standard-wall (Schedule 40) pipe sizes 1-2 as well as 1 5/8" wide strut channel. Mount the upper bracket directly to a ceiling or other flat surface, or use an anchor to mount the system to angles, beams, and joists.
    Beam Anchor
    Image of Product. Front orientation. Seismic Bracing Mounts. Seismic Bracing Mounts, Beam Anchor.
    Beam anchors allow you to mount upper brackets to beams, C-channel, ceiling joists, and other flat surfaces. Their set screws have heads that break off when the screw is tightened to ensure proper installation.
    For
    Beam Thk.
    Min.
    Max.
    Wd.
    Lg.
    Ht.
    Material
    Wt. Cap.,
    lb.
    No. of Set Screws
    Included
    Certification
    Includes
    Each
    3/8"7/8"2 3/8"2 3/4"3 9/16"Steel1,0002C-UL Listed
    FM Approved
    UL Listed
    OSHPD Preapproved
    		1/2" Bolt and Nut, Set Screws00000000000000
    Angle Iron Anchor
    Image of Product. Front orientation. Seismic Bracing Mounts. Seismic Bracing Mounts, Angle Iron Anchor.
    Angle iron anchors allow you to mount upper brackets to pairs of angles, such as those used in ceiling joists. Their set screws have heads that break off when the screw is tightened to ensure proper installation.
    For Max.
    Beam Thk.
    Wd.
    Lg.
    Ht.
    Material
    Wt. Cap.,
    lb.
    No. of Set Screws
    Included
    Certification
    Includes
    Each
    3/8"3 5/16"3"2 1/2"Steel1,0002C-UL Listed
    FM Approved
    UL Listed
    OSHPD Preapproved
    		1/2" Bolt and Nut, Set Screws0000000000000

    Strut Channel Fall-Arrest Anchors

    Sliding in a track, these anchors give you freedom of movement while staying safely tethered. They fit into strut channels embedded in concrete for a secure place to clip your fall-arrest lanyard. They take just seconds to install and remove—the two sides of the anchor hook separately into your strut channel and lock together with a carabiner. When used together with a lanyard and harness, these anchors help you meet OSHA and ANSI safety standards.
    Slide In
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Strut Channel Fall-Arrest Anchors.
    Image of Product. Front orientation. Fall-Arrest Anchors. Strut Channel Fall-Arrest Anchors.
    For Channel
    Wd.
    Material
    Connection
    Hardware
    Carabiner
    Material
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Each
    With Carabiner
    1 5/8"Zinc-Plated SteelCarabinerSteel5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
     

    Clamp-On Fall-Arrest Anchors

    Image of ProductInUse. Side1 orientation. Fall-Arrest Anchors. Clamp-On Fall-Arrest Anchors.
    A secure hold that won’t damage your mounting surface—these anchors clamp onto stable structures such as half-walls to give you a place to clip your fall-arrest lanyard. Even though they clamp, they grip firmly with set screws and a locking pin. Made of powder-coated steel, they’re tough enough to stand up to frequent use, even outdoors. Protective pads on the clamp arm and set screws keep them from scratching your surface. When used with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
    Clamp On
    Opening
    Max.
    Min.
    Reach
    Lg.
    Material
    Color
    Connection
    Hardware
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    15"0"8"Powder-Coated SteelBlackD-Ring5,000310ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000000
     

    Concrete Fall-Arrest Anchors

    Clip your fall-arrest lanyard to a secure connection point on approved concrete surfaces. These anchors expand into a hole, locking against the sides to form a secure hold. They swivel 360° as you move. When used together with a harness and lanyard, these anchors help you meet ANSI and OSHA safety standards.
    Wedge In
    Image of Product. Front orientation. Fall-Arrest Anchors. Concrete Fall-Arrest Anchors, Wedge In.
    Wedge-in anchors are more secure than push-in anchors. They expand in the hole as you turn the bolt.
    For Mounting
    Hole Dia.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Each
    3/4"SteelD-RingSwivel10,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
     
    Push In
    Image of Product. Front orientation. Fall-Arrest Anchors. Concrete Fall-Arrest Anchors, Push In.
    Push-in anchors are easier to install than wedge anchors, and they’re reusable. Expand and release them by pushing a button. You can attach them to vertical or horizontal surfaces. Made of stainless steel, they resist the weather and grime that could decrease an anchor’s lifespan.
    For Mounting
    Hole Dia.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Each
    3/4"Stainless SteelD-RingSwivel5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000000
     

    Drop-Through Fall-Arrest Anchors

    Anchor your fall-arrest lanyard to overhead grating, girders, and other stable structures. These anchors give you a secure, stable way to clip in without being permanent. Slip these anchors through a hole and the plate on the end catches firmly. When the job’s done, pull the anchor out and use it again. Polyurethane tubing near the plate protects the anchor from abrasion. When used together with a lanyard and harness, these anchors help you meet OSHA and ANSI safety standards.
    Drop Through
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Drop-Through Fall-Arrest Anchors.
    Image of Product. Front orientation. Fall-Arrest Anchors. Drop-Through Fall-Arrest Anchors.
    Plate
    Cable
    For Mounting
    Hole Dia.
    Material
    Dia.
    Thk.
    Material
    Construction
    Material
    Connection
    Hardware
    Breaking Strength,
    lbf
    Wt. Cap.
    Specs. Met
    Choose a Cable
    Length, ft.
    Each
    1 3/4" to 2"Steel4"1/4"SteelWire RopeSteelD-Ring5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502
    2
    ,
    6
    ,
    8 1/2
    		000000000000000
    1 3/4" to 3"Steel6"1/4"SteelWire RopeSteelD-Ring5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502
    2
    ,
    6
    ,
    8 1/2
    		00000000000000
    1 3/4" to 6"Steel12"1/4"SteelWire RopeSteelD-Ring5,000Not RatedANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502
    2
    ,
    6
    ,
    8 1/2
    		00000000000000
     

    Fall-Arrest Anchors

    Connect fall-arrest lanyards to these anchor points. You'll want to install these into an approved, stable surface that is strong enough to support someone. When used together with a lanyard and a harness, they help you meet OSHA and ANSI safety standards.
    Bolt On
    Image of Product. Front orientation. Fall-Arrest Anchors. Fall-Arrest Anchors, Bolt On.
    Stainless Steel—Stainless steel anchors resist corrosion, so they stand up to outdoor elements and in spaces where moisture and grime could weaken the anchor.
    Mounting
    Holes
    Material
    Dia.
    No.
    of
    Fasteners
    Included
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Steel1/2"2NoD-RingRigid5,000420ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
    Stainless Steel1/2"2NoD-RingRigid5,000420ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.5020000000000000
     
    Quick Install Push In
    Image of Product. Front orientation. Fall-Arrest Anchors. Fall-Arrest Anchors, Push-In Attachment.
    Quick-install push-in anchors mount overhead into vertical holes in steel without requiring any tools. Pull the collar back to retract the spring-loaded blade and slide the anchor into the hole. When you release, the blade rotates to lock the anchor in place. When you’re done, pull the collar back to remove the anchor.
    For Mounting
    Hole Dia.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    3/4" to 1 1/4"SteelD-RingRigid5,000310ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
     
    Weld On
    Image of Product. Front orientation. Fall-Arrest Anchors. Fall-Arrest Anchors, Weld On.
    Weld-on anchors swivel 360°, so your lanyard turns smoothly with you as you move.
    Material
    Connection
    Hardware
    D-Ring
    Movement
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    SteelD-RingSwivel10,000420ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000000
     

    Roof Fall-Arrest Anchors

    Safely clip into these anchors for maintenance, inspection, or construction jobs on your roof. When used together with a lanyard and harness, they help you meet OSHA and ANSI safety standards. Attach them to wood and metal roofs, whether flat or sloped. Made of zinc-plated or powder-coated steel, they withstand moisture, rain, and other outdoor elements.
    Nail On
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Roof Fall-Arrest Anchors, Nail On, Style A.

    Style A

    Max. No. of
    Simultaneous Users
    Nail-On
    Mounting
    No. of
    Connections
    For Fall
    Restraint
    For Fall
    Arrest
    Material
    Fasteners
    Included
    Connection
    Hardware
    No. of
    Holes
    Hole
    Dia.
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Style A
    111Zinc-Plated SteelYesD-Ring3211/64"5,000310ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.50200000000000000
     
    Nail On, Bolt On
    Image of ProductInUse. Front orientation. Fall-Arrest Anchors. Roof Fall-Arrest Anchors, Nail On, Bolt On, Style B.

    Style B

    Style B—Style B anchors are more versatile than Style A anchors—you can even attach them to concrete. Clip your lanyard to any of the four sides for freedom of movement.
    Max. No. of
    Simultaneous Users
    Nail-On
    Mounting
    Bolt-On
    Mounting
    No. of
    Connections
    For Fall
    Restraint
    For Fall
    Arrest
    Material
    Color
    Fasteners
    Included
    Connection
    Hardware
    No. of
    Holes
    Hole
    Dia.
    No. of
    Holes
    Hole
    Dia.
    Breaking Strength,
    lbf
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Style B
    421Powder-Coated SteelRedNoD-Ring2023/64"41/2"5,000420ANSI/ISEA 125, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502000000000000000
     
    back to top