Hook-Mount Hangers
A versatile solution for temporary hanging of pipe and tubing at work sites as well as anywhere welding and fastening are not possible. Feed material through the strap, then use the D-rings to adjust the hanging height. Straps are polypropylene to prevent scratching on soft pipe and tubing. D-rings are galvanized steel for good corrosion resistance.
Routing S-Hooks
Hang these S-hooks from fencing and railing to route large bundles of material, such as cable, hose, and wire through your facility or worksite to avoid tripping hazards.
Rounded/flat hooks hang from both curved and flat surfaces such as railing, angle iron, and square tube. Hooks with two or three bottom hooks organize multiple lines of cable, hose, and wire on a single S-hook for easy access.
PVC-coated steel hooks won’t scratch the hanging surface or routed material.
Fiberglass hooks are lightweight, so you can use many along a single rail without adding a lot of weight. They also won’t scratch hanging surfaces or routed material. These hooks do not conduct heat or electricity. All have cable tie holes to secure material to the hooks or to secure the hook to a hanging surface. Some meet UL 94 V-0 for flame retardance.
Glow-in-the-dark hooks remain visible in blackouts or emergency situations to help people avoid hazards.
For technical drawings and 3-D models, click on a part number.
| Total No. of Bottom Hooks | For Max. Bundle Dia. | Thick. | Usable Lg. | Top Hook Opening Wd. × Inside Wd. | Bottom Hook Opening Wd. × Inside Wd. (No. of) | For Max. Cable Tie Wd. | Temp. Range, °F | Cap., lbs. | Specifications Met | Each | |
Rounded Hook | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
PVC Plastic-Coated Steel—Orange | |||||||||||
| 1 | 3" | 9/16" | 7 15/16" | 2" × 2 1/4" | 2 1/2" × 3" (1) | __ | 0° to 125° | 275 | __ | 0000000 | 000000 |
| 1 | 4" | 11/16" | 9 11/16" | 2 7/8" × 3" | 3" × 4" (1) | __ | 0° to 125° | 325 | __ | 0000000 | 00000 |
| 1 | 5" | 11/16" | 11 11/16" | 2 7/8" × 3" | 4" × 5" (1) | __ | 0° to 125° | 350 | __ | 0000000 | 00000 |
Fiberglass—Yellow | |||||||||||
| 1 | 1 5/8" | 3/8" | 5 3/8" | 1 1/8" × 1 7/8" | 1 5/8" × 1 5/8" (1) | 0.40" | 0° to 425° | 80 | UL 94 V-0 | 0000000 | 00000 |
| 1 | 2 5/8" | 11/16" | 7 3/4" | 1 3/4" × 2 3/4" | 2 5/8" × 2 5/8" (1) | 0.40" | 0° to 425° | 100 | UL 94 V-0 | 0000000 | 00000 |
| 1 | 3 1/2" | 7/8" | 10 1/4" | 2 1/8" × 3 1/2" | 3 1/2" × 3 1/2" (1) | 0.60" | 0° to 425° | 400 | UL 94 V-0 | 0000000 | 00000 |
| 1 | 4 1/2" | 1 1/8" | 12 13/16" | 2 1/2" × 4 1/2" | 4 1/2" × 4 1/2" (1) | 0.80" | 0° to 425° | 500 | UL 94 V-0 | 0000000 | 00000 |
Fiberglass—Glow-in-the-Dark Green | |||||||||||
| 1 | 1 5/8" | 3/8" | 5 3/8" | 1 1/8" × 1 7/8" | 1 5/8" × 1 5/8" (1) | 0.40" | 0° to 425° | 80 | UL 94 V-0 | 0000000 | 00000 |
| 1 | 2 5/8" | 11/16" | 7 3/4" | 1 3/4" × 2 3/4" | 2 5/8" × 2 5/8" (1) | 0.40" | 0° to 425° | 100 | UL 94 V-0 | 0000000 | 00000 |
| 1 | 3 1/2" | 7/8" | 10 1/4" | 2 1/8" × 3 1/2" | 3 1/2" × 3 1/2" (1) | 0.60" | 0° to 425° | 400 | UL 94 V-0 | 0000000 | 00000 |
| 1 | 4 1/2" | 1 1/8" | 12 13/16" | 2 1/2" × 4 1/2" | 4 1/2" × 4 1/2" (1) | 0.80" | 0° to 425° | 500 | UL 94 V-0 | 0000000 | 00000 |
Rounded/Flat Hook | |||||||||||
Fiberglass—Orange | |||||||||||
| 1 | 3 1/2" | 1" | 10 1/2" | 3 1/2" × 3 3/4" | 3 1/2" × 3 1/2" (1) | 0.50" | -20° to 230° | 250 | __ | 0000000 | 00000 |
| 2 | 1 1/4", 3 1/2" | 1" | 13 1/2" | 3 1/2" × 3 3/4" | 1 1/4" × 1 1/4" (1) 3 1/2" × 3 1/2" (1) | 0.50" | -20° to 230° | 250 | __ | 0000000 | 00000 |
| 3 | 1 1/2" | 1" | 16" | 3 1/2" × 3 3/4" | 1 1/2" × 1 1/2" (3) | 0.50" | -20° to 230° | 250 | __ | 0000000 | 00000 |
Wire-Mount Routing Rings
Hang cable and other flexible material beneath wire to prevent it from sagging and swaying. Rings are made of rigid, plastic-coated steel. The plastic coating prevents damage to wire and cable. To install, hook the two ends of the ring around the wire—no fasteners required.
For technical drawings and 3-D models, click on a part number.