These general purpose mats provide cushion to reduce the fatigue and strain of standing while working.

Thicker than our other greaseproof antifatigue mats, these mats have more cushion for greater comfort.

Made of polyurethane foam, these mats are the ultimate in durability and comfort.

Durable and cushioned, these mats combine the comfort of an antifatigue sponge mat with wear-resistant construction.

These general purpose mats provide cushion to reduce the fatigue and strain of standing while working.

Designed to repel sparks and hot metal shards, these mats are for use in welding applications.

Cushion where you stand without contaminating your line in food and pharmaceutical plants.

These mats withstand occasional contact with grease.

These general purpose mats provide a walking surface in wet environments that allows liquids to drain beneath your feet.

Hollow tubes form a flexible, cushioned surface to reduce the fatigue and strain of standing while working.

Use these greaseproof mats where grease and oil are constantly present.

These general purpose mats provide a walking surface in wet environments that allows liquids to drain beneath your feet.

Use these mats where drainage and slip resistance are a priority.

Suction cups on the bottom keep these mats in place when wet.

These mats have a smooth bottom for use on hard floor surfaces.

These mats have an abrasive fiber surface to scrape off dirt, mud, and snow.

Made of galvanized steel, these rust-resistant mats scrape off stubborn mud and snow.

Topped with carpet, these mats provide excellent moisture absorption.

Tested to withstand the stated dielectric test voltage, these mats protect workers from electrical shock when working around high-voltage equipment.

Use these mats to drain static that can harm sensitive equipment.

Use these antistatic, static-dissipative, or conductive mats to prevent static discharge that can harm sensitive electronics and equipment.

Integrated connectors allow you to link mats together to create the size and shape you need.

When these sticky mats get dirty, use the cleaner to restore the dirt-grabbing surface.

Keep feet warm in cold, drafty rooms.

These mats are designed to absorb shock from falling objects and protect floors as well as equipment. They stand up to prolonged loads and are often used to store heavy industrial parts.

Encourage social distancing in areas where adhesive floor decals can't be used or where waiting-line locations often change.

With brightly colored markings spaced six feet apart, these drainage mats guide coworkers to stand at a safe distance from each other to help prevent the spread of illness. An open-grid design lets liquid pass through beneath your feet, so puddles don’t form to cause a slipping hazard.

Add permanent slip resistance to floors, ramps, stairs, and docks with these solid plates.

With a raised disc surface that can be felt with feet and canes, these tiles alert individuals with visual impairments to an upcoming intersection or an edge of a walkway.

Not only do these mats prolong the life of a workbench top, they also protect tools and parts by cushioning them when they fall.

Protect drawer beds and tools from scratches and dents.

Keep tools and small parts in place and protected from damage.

Made of silicone, these trays bend to hug curves and cling to highly polished surfaces—keeping your tools right where you need them.

Keep oil out of soil and fuel out of drains. These sorbents cling to oil but let water pass through, so you can leave them outside for weeks to catch oil spills and leaks.

Sweep, mop, and vacuum over these sorbents, and the adhesive will hold them in place.

Absorb spills, catch drips, and control leaks in clean room environments. These sorbents are cleaned and bagged and don’t release as much lint or dust as other sorbents.

Wipe up most small chemical spills, including fuming acids and strong oxidizers, from floors, work surfaces, and equipment.

Soak up oil and water spills as soon as they happen—mount these dispensers on break room walls, near machinery, or anywhere spills may occur.

These kits have everything you need when a spill occurs, even bags for disposal.

These kits have everything you need to safely clean up acid and base spills.

Able to shoulder up to 1,500 psi per mounting point, nitrile pads can support heavy machinery.

Place pads under equipment, such as drill presses, milling machines, saws, and air-conditioning units to minimize vibration and noise transmitted to and from machinery.

Shield surfaces from impact, reduce vibration and noise, and stabilize connection points with these packs of pads—they’re reinforced with fabric to endure extreme compression without deforming. They’re also known as bearing pads.

Made of nitrile rubber, these pads have excellent resistance to oil and solvents.

Made of fiber-reinforced PVC, these pads endure exposure to corrosive chemicals, such as cleaning solvents, chlorine, and hydrochloric acid.

Rated IP67 and NEMA 6, these switch mats withstand washdowns.

Customize the length of these switches by cutting them from a 25-foot roll.

Step on these mats to control doors, lights, or alarms.

Thicker than standard safety switch mats, these withstand repeated impact from heavy and sharp objects.

Use these pads to protect your hands from intermittent exposure to direct heat when handling hot items.

Similar to heavy kraft paper, these temporary floor protectors offer moisture resistance. Use masking tape to keep in place.

Pads are marked with inch and centimeter grid lines to guide your cut.

Control static electricity on work surfaces—mats transfer static charges from the top of the surface to the ground.

This film conducts electricity to prevent the buildup of static charges.

Because this film dissipates heat, it is often used for printed circuit boards and power supplies.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.

Often used for packaging and construction applications, this film is also known as Visqueen.

The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

A static-dissipative coating on this polyester film prevents electrostatic discharge from damaging sensitive electronic equipment.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

Static cling allows this PVC film to stick without an adhesive.

The slippery surface on this FEP film prevents sticking. Use it as a release film when making molded parts.

PFA film retains its performance properties through a wide range of temperatures. It is often used to insulate cables.