Choosing an Electrical Switch
More
30 mm Multifunction Panel-Mount Push-Button Switches
Save space on a panel by using one switch to perform multiple functions. These switches are rated NEMA 4X and 13 for protection from corrosion, washdowns, and oil/coolant spraying. They include enough contact blocks to control the number of circuits listed.
Illuminated switches have the message "Motor Run," which lights up in red when equipment is started.
Note: If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.
Additional contact blocks (sold separately) can be added to control more circuits, or replace the included contact block.
For technical drawings and 3-D models, click on a part number.
| No. of Circuits Controlled | Switch Starting Position | No. of Buttons | Message (Actuator Color) | Switch Action | No. of Terminals | Industry Designation | Switching Current @ Voltage | Max. Voltage  | Dp. Behind Panel | For Max. No. of Contact Blocks | Choose a Bulb Voltage | Each | |
Metal Base with Screw Terminals | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 On (Normally Closed) | 1 | Stop (Red) | Springs Back (Momentary) | 2 | SPST-NC | 6 A @ 120 V AC, 5.7 A @ 24 V DC | 250V DC 600V AC | 1 11/16" | 8 | __ | 0000000 | 0000000 |
| 2 | 2 Off (Normally Open) | 3 | Run (Black), Jog (Black), Off (Red) | Stays Switched (Maintained), Springs Back (Momentary); Stays Switched (Maintained) | 4 | SPST-NO | 6 A @ 120 V AC, 5.7 A @ 24 V DC | 250V DC 600V AC | 1 11/16" | 8 | __ | 0000000 | 000000 |
Metal Base with Screw Terminals and Push Reset | |||||||||||||
| 2 | 2 Off (Normally Open) | 3 | Hand (Black), Auto (Black), Off (Red) | Stays Switched (Maintained) | 4 | SPST-NO | 6 A @ 120 V AC, 5.7 A @ 24 V DC | 250V DC 600V AC | 1 11/16" | 8 | __ | 0000000 | 000000 |
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | 2 | Start (Green), Stop (Red) | Stays Switched (Maintained) | 4 | DPST-1NO/1NC | 6 A @ 120 V AC, 5.7 A @ 24 V DC | 250V DC 600V AC | 1 11/16" | 8 | __ | 0000000 | 000000 |
Metal Base with Screw Terminals—Illuminated | |||||||||||||
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | 2 | Start (Green), Motor Run (Red), Stop (Red) | Springs Back (Momentary) | 6 | DPST-1NO/1NC | 6 A @ 120 V AC, 5.7 A @ 24 V DC | 250V DC 600V AC | 1 11/16" | 6 | 0000000 | 00 | |
Contact Blocks for Manual Switches
Make or break an electrical circuit. These contact blocks mount to manual switches and transmit an electrical signal when the switch actuator is engaged. You can stack multiple blocks, so a single switch can control several circuits. This is helpful in setups that require multiple systems to turn on or off at the same time. For example, the switch on a conveyor line could turn off the conveyor and turn on a diverter and alarm.
For technical drawings and 3-D models, click on a part number.