Swivel Anchors | McMaster-Carr

Filter by

Movement

Material

Load Securement Type

Mount Type

System of Measurement

Weight Capacity

Thread Size

Base Material

Ring Height

Ring Style

Ring Material

Inner Ring Width

Anchor Type

Diameter

Length

Connection Hardware

Mounting Screw Size

Export Control Classification Number (ECCN)

Attachment Method

RoHS

Compliant with Exemptions

Not Compliant

Finish

Black Oxide

Zinc Plated

DFARS Specialty Metals

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Hole Diameter

Mounting Hole Diameter

91 Products

Swiveling Weld-On Tie-Down Rings


Style A	Style B

Before welding, these rings swivel all the way around to accommodate ties in any direction. Weld them to any surface for a more secure connection than other tie-down rings.

Warning: Never use for lifting applications.

Style B—Style B rings are angled, making it easier to attach bulky ties and straps. They also protect ties and straps from abrasion to prevent them from wearing down over time.

			Ring				Base
	Style	Wt. Cap., lb.	Inner Wd.	Ht.	Thk.	Style	Dia.	Thk.	Material		Each
Steel Ring



		A	15,585	3"	6"	1"	D-Ring	4 5/8"	13/16"	Low-Carbon Steel	1907N11	000000


		B	15,585	3"	4 7/8"	1"	Angled-Bend D-Ring	4 5/8"	13/16"	Low-Carbon Steel	1907N12	00000

Swiveling Tie-Down Rings


Style A	Style B

Accommodate ties in any direction with these rings that swivel all the way around.

Warning: Never use for lifting applications.

Style B—Style B has a loose ring that twists to minimize abrasion on webbing and rope.

			Ring				Base				Mounting Holes						Each
	Style	Wt. Cap., lb.	Inner Wd.	Ht.	Thk.	Style	Lg.	Wd.	Material	Mounting Fasteners Included	No. of	Dia.	Ctr.-to-Ctr. Wd.	Ctr.-to-Ctr. Lg.	For Mounting Screw Size		1-99	100-Up
18-8 Stainless Steel



		A	200	5/8"	1 5/16"	3/16"	Round Ring	1 5/16"	1 3/16"	18-8 Stainless Steel	No	4	5/32"	7/8"	3/4"	No. 8	31665T1	00000	00000


		A	300	3/4"	1 19/32"	1/4"	Round Ring	1 9/16"	1 5/16"	18-8 Stainless Steel	No	4	5/32"	1"	3/4"	No. 8	31665T2	0000	0000
		A	480	3/4"	1 23/32"	5/16"	Round Ring	2"	1 9/16"	18-8 Stainless Steel	No	4	7/32"	1 3/8"	1"	No. 10	31665T4	0000	0000
		B	200	1 3/16"	2 1/2"	3/16"	Round Ring	1 5/16"	1 3/16"	18-8 Stainless Steel	No	4	3/16"	7/8"	3/4"	No. 8	31665T21	0000	0000
		B	300	1 5/8"	3 5/32"	1/4"	Round Ring	1 9/16"	1 5/16"	18-8 Stainless Steel	No	4	1/4"	1"	3/4"	No. 8	31665T22	0000	0000
		B	480	2"	3 3/4"	5/16"	Round Ring	1 3/4"	1 9/16"	18-8 Stainless Steel	No	4	5/16"	1 3/8"	1"	No. 10	31665T24	00000	00000

Concrete Fall-Arrest Anchors

Clip your fall-arrest lanyard to a secure connection point on approved concrete surfaces. These anchors expand into a hole, locking against the sides to form a secure hold. They swivel 360° as you move. When used together with a harness and lanyard, these anchors help you meet ANSI and OSHA safety standards.

Wedge In

Wedge-in anchors are more secure than push-in anchors. They expand in the hole as you turn the bolt.

Material	Connection Hardware	D-Ring Movement	Breaking Strength, lbf	Wt. Cap.	Specs. Met		Each



3/4"	Steel	D-Ring	Swivel	10,000	Not Rated	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	11005T39	000000

Push In

Push-in anchors are easier to install than wedge anchors, and they’re reusable. Expand and release them by pushing a button. You can attach them to vertical or horizontal surfaces. Made of stainless steel, they resist the weather and grime that could decrease an anchor’s lifespan.

Material	Connection Hardware	D-Ring Movement	Breaking Strength, lbf	Wt. Cap.	Specs. Met		Each



3/4"	Stainless Steel	D-Ring	Swivel	5,000	Not Rated	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	11005T111	0000000

Fall-Arrest Anchors

Connect fall-arrest lanyards to these anchor points. You'll want to install these into an approved, stable surface that is strong enough to support someone. When used together with a lanyard and a harness, they help you meet OSHA and ANSI safety standards.

Weld On

Weld-on anchors swivel 360°, so your lanyard turns smoothly with you as you move.

Connection Hardware	D-Ring Movement	Breaking Strength, lbf	Wt. Cap., lb.	Specs. Met		Each



Steel	D-Ring	Swivel	10,000	420	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	11005T44	0000000

Swiveling Extension Spring Stud Anchors

A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.

	Thread
	Size	Min. Lg.	Spacing	Lg.	Dia.	Hole Dia.	Hex Size		Each
Black-Oxide Steel



		6-32	3/8"	Coarse	5/8"	0.138"	0.08"	0.035"	97745A550	00000


		8-32	5/8"	Coarse	7/8"	0.164"	0.1"	0.05"	97745A660	00000
		10-24	3/4"	Coarse	1 1/8"	1/4"	0.12"	0.05"	97745A120	00000
		10-32	3/4"	Fine	1 1/8"	1/4"	0.12"	1/16"	97745A130	00000
		1/4"-20	7/8"	Coarse	1 1/4"	1/4"	0.15"	5/64"	97745A770	00000
		1/4"-28	7/8"	Fine	1 1/4"	1/4"	0.15"	5/64"	97745A140	00000
		3/8"-16	1 1/8"	Coarse	1 5/8"	3/8"	0.22"	1/8"	97745A880	00000
		3/8"-24	1 1/8"	Fine	1 5/8"	3/8"	0.22"	1/8"	97745A150	00000
		M3.5 × 0.6 mm	10 mm	Coarse	16 mm	3.5 mm	2 mm	0.9 mm	97745A160	00000
		M4 × 0.7 mm	16 mm	Coarse	22 mm	4 mm	2.5 mm	1.3 mm	97745A170	00000
		M5 × 0.8 mm	19 mm	Coarse	28 mm	5 mm	3 mm	1.5 mm	97745A180	00000


		M6 × 1 mm	22 mm	Coarse	32 mm	6 mm	4 mm	2 mm	97745A190	00000
		M8 × 1.25 mm	25 mm	Coarse	38 mm	8 mm	5 mm	2.5 mm	97745A200	00000
		M10 × 1.5 mm	28 mm	Coarse	41 mm	10 mm	6 mm	3 mm	97745A210	00000

E-Track Plates

Style

Use these plates for a tie-down system in places where full lengths of track won't fit.

Snap straps, anchor points, and other accessories into Style A, B, and C plates.

Zinc-Plated Low-Carbon Steel—Zinc-plated steel plates have mild corrosion resistance.

	Wt. Cap., lb.	Lg.	Wd.		Each
Zinc-Plated Low-Carbon Steel



	B	1,000	1"	4 1/2"	88525T61	00000

Corrosion-Resistant Swiveling Extension Spring Stud Anchors

These stainless steel stud anchors offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.

	Thread
	Size	Min. Lg.	Spacing	Lg.	Dia.	Hole Dia.	Hex Size		Each
18-8 Stainless Steel



		6-32	3/8"	Coarse	5/8"	0.138"	0.08"	0.035"	96376A110	000000


		6-40	5/8"	Fine	5/8"	1/8"	0.08"	0.035"	96376A500	00000
		8-32	5/8"	Coarse	7/8"	0.164"	0.1"	0.05"	96376A220	00000
		10-24	3/4"	Coarse	1 1/8"	1/4"	0.12"	0.05"	96376A520	00000
		10-32	3/4"	Fine	1 1/8"	1/4"	0.12"	1/16"	96376A530	00000
		1/4"-20	7/8"	Coarse	1 1/4"	1/4"	0.15"	5/64"	96376A330	00000
		1/4"-28	7/8"	Fine	1 1/4"	1/4"	0.15"	5/64"	96376A540	00000
		3/8"-16	1 1/8"	Coarse	1 5/8"	3/8"	0.22"	1/8"	96376A440	00000
		3/8"-24	1 1/8"	Fine	1 5/8"	3/8"	0.22"	1/8"	96376A550	00000
		M3.5 × 0.6 mm	10 mm	Coarse	16 mm	3.5 mm	2 mm	0.9 mm	96376A560	00000
		M4 × 0.7 mm	16 mm	Coarse	22 mm	4 mm	2.5 mm	1.3 mm	96376A570	00000


		M5 × 0.8 mm	19 mm	Coarse	28 mm	5 mm	3 mm	1.5 mm	96376A580	00000
		M6 × 1 mm	22 mm	Coarse	32 mm	6 mm	4 mm	2 mm	96376A590	00000
		M8 × 1.25 mm	25 mm	Coarse	38 mm	8 mm	5 mm	2.5 mm	96376A600	00000
		M10 × 1.5 mm	28 mm	Coarse	41 mm	10 mm	6 mm	3 mm	96376A610	00000

Extension Spring Stud Anchors

A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection.

	Thread
	Size	Min. Lg.	Spacing	Lg.	Dia.	Hole Dia.		Each
Black-Oxide Steel



		6-32	3/8"	Coarse	5/8"	0.138"	0.08"	9634K21	00000


		6-40	3/8"	Fine	5/8"	0.138"	0.08"	9634K31	0000
		8-32	5/8"	Coarse	7/8"	0.164"	0.1"	9634K22	0000
		8-36	5/8"	Fine	7/8"	0.164"	0.1"	9634K32	0000
		10-24	3/4"	Coarse	1 1/8"	0.19"	0.12"	9634K33	0000
		10-32	3/4"	Fine	1 1/8"	0.19"	0.12"	9634K34	0000
		1/4"-20	7/8"	Coarse	1 1/4"	1/4"	0.15"	9634K23	0000
		1/4"-20	7/8"	Coarse	1 1/4"	1/4"	0.268"	9634K35	0000
		1/4"-28	7/8"	Fine	1 1/4"	1/4"	0.15"	9634K24	0000
		3/8"-16	1 1/8"	Coarse	1 5/8"	3/8"	0.22"	9634K25	0000
		3/8"-16	1 1/8"	Coarse	1 5/8"	3/8"	0.268"	9634K36	0000


		3/8"-24	1 1/8"	Fine	1 5/8"	3/8"	0.22"	9634K26	0000
		M3.5 × 0.6 mm	10 mm	Coarse	16 mm	3.5 mm	2 mm	9634K37	0000
		M4 × 0.7 mm	16 mm	Coarse	22 mm	4 mm	2.5 mm	9634K38	0000
		M5 × 0.8 mm	19 mm	Coarse	28 mm	5 mm	3 mm	9634K39	0000
		M6 × 1 mm	22 mm	Coarse	32 mm	6 mm	4 mm	9634K41	0000
		M8 × 1.25 mm	25 mm	Coarse	38 mm	8 mm	5 mm	9634K42	0000
		M10 × 1.5 mm	28 mm	Coarse	41 mm	10 mm	6 mm	9634K43	0000

Corrosion-Resistant Extension Spring Stud Anchors

These stainless steel stud anchors offer excellent corrosion resistance. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection.

	Thread
	Size	Min. Lg.	Spacing	Lg.	Dia.	Hole Dia.		Each
18-8 Stainless Steel



		6-32	3/8"	Coarse	5/8"	0.138"	0.08"	95907A440	00000


		6-40	5/8"	Fine	5/8"	0.138"	0.08"	95907A100	0000
		8-32	5/8"	Coarse	7/8"	0.164"	0.1"	95907A460	0000
		8-36	5/8"	Fine	7/8"	0.164"	0.1"	95907A110	0000
		10-24	3/4"	Coarse	1 1/8"	0.19"	0.12"	95907A120	0000
		10-32	3/4"	Fine	1 1/8"	0.19"	0.12"	95907A130	00000
		1/4"-20	7/8"	Coarse	1 1/4"	1/4"	0.15"	95907A480	0000
		1/4"-20	7/8"	Coarse	1 1/4"	1/4"	0.268"	95907A140	00000
		1/4"-28	7/8"	Fine	1 1/4"	1/4"	0.15"	95907A490	0000
		3/8"-16	1 1/8"	Coarse	1 5/8"	3/8"	0.22"	95907A510	00000
		3/8"-16	1 1/8"	Coarse	1 5/8"	3/8"	0.268"	95907A150	00000


		3/8"-24	1 1/8"	Fine	1 5/8"	3/8"	0.22"	95907A520	00000
		M3.5 × 0.6 mm	10 mm	Coarse	16 mm	3.5 mm	2 mm	95907A160	00000
		M4 × 0.7 mm	16 mm	Coarse	22 mm	4 mm	2.5 mm	95907A170	00000
		M5 × 0.8 mm	19 mm	Coarse	28 mm	5 mm	3 mm	95907A180	00000
		M6 × 1 mm	22 mm	Coarse	32 mm	6 mm	4 mm	95907A190	00000
		M8 × 1.25 mm	25 mm	Coarse	38 mm	8 mm	5 mm	95907A200	00000
		M10 × 1.5 mm	28 mm	Coarse	41 mm	10 mm	6 mm	95907A210	00000

Bolt-Style Sleeve Anchors for Block and Brick

Remove the bolt so the anchor is flush with your walls and floors to slide components past these anchors, making it easier to install or make adjustments. They’re best for door frames that need to be pressed into place or machinery you service frequently. All have a sleeve that expands inside your hole to create a strong grip. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials like block and brick. You can use these anchors as an alternative to wedge anchors in concrete near edges, corners, or other weak points, but they are not as strong.

To install, drive the anchor through your component into a drilled hole until the head meets the surface. Then, tighten the bolt to expand the anchor sleeve. As you tighten, the nylon ring compresses to secure the component against the surface. You can remove the bolt, but the anchor itself cannot be removed.

Anchors with Hex Head

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.

		Thread				Ultimate Strength, lbf				Each		Package
	Lg.	Size	Lg.	Min. Installation Dp.	Drill Bit Size	Pull-Out	Shear	Conditions Tested In	Installation Torque, ft·lbf		Each	Pkg. Qty.		Pkg.
Corrosion-Resistant 18-8 Stainless Steel







				1/4" Diameter

				1 3/4"	10-24	3/4"	1 1/4"	1/4"	1,480	2,080	4,000 psi Concrete	3	92405A194	00000	4	92405A102	000000


				3"	10-24	3/4"	1 1/4"	1/4"	1,480	2,080	4,000 psi Concrete	3	92405A198	0000	4	92405A104	00000




						3/8" Diameter

						2 1/4"	5/16"-18	7/8"	2"	3/8"	4,400	6,400	4,000 psi Concrete	12	92405A200	0000	4	92405A106	00000


						3 1/2"	5/16"-18	7/8"	2"	3/8"	4,400	6,400	4,000 psi Concrete	12	92405A202	00000	4	92405A108	00000
						4"	5/16"-18	7/8"	2"	3/8"	4,400	6,400	4,000 psi Concrete	12	92405A203	00000	4	92405A111	00000




								1/2" Diameter

								2 3/4"	3/8"-16	1"	2 1/2"	1/2"	6,400	8,000	4,000 psi Concrete	25	92405A300	00000	4	92405A113	00000


								4 3/4"	3/8"-16	1"	2 1/2"	1/2"	6,400	8,000	4,000 psi Concrete	25	92405A302	00000	4	92405A115	00000