T-Slotted Framing Cable Holders
Route wires, cables, and tubing along T-slotted rails.
Cable holders are best when you frequently need to access or move your cable. They're easy to add right where your wires are unruly.
Raceway is a low-profile option for concealing and protecting cable.
Wire duct protects your cable the best against impact.
Wire sleeving fully encloses your bundle like raceway and duct, yet is flexible, so it's simpler to install around corners.
Cable tie holders accept cable ties (not included). They twist into a T-slot. Metal-detectable cable tie holders are brightly colored and contain a special compound that sets off X-ray equipment and metal detectors, so you can retrieve them.
For Rail Ht. | For Max. Cable Tie | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Thick. | Wd. | Color | Performance Properties | Material | Mount Type | Each | |
| 1" | 2" | 3" | 1/16" | 3/8" | Black | __ | Plastic | Twist On | 47065T268 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 1/16" | 3/8" | Black | __ | Plastic | Twist On | 8005N15 | 0000 |
| 1 1/2", 20mm, 30mm, 40mm | 3", 40mm, 60mm, 80mm | 4 1/2", 120mm | 1/16" | 3/16" | White | __ | Plastic | Twist On | 47065T674 | 0000 |
| 1 1/2", 20mm, 30mm, 40mm | 3", 40mm, 60mm, 80mm | 4 1/2", 120mm | 1/16" | 3/16" | Blue | Metal Detectable | Plastic | Twist On | 47065T673 | 0000 |
| 20mm | 40mm | __ | 1/16" | 3/8" | Black | __ | Plastic | Twist On | 5537T356 | 000 |
| 30mm | 60mm | __ | 1/16" | 3/8" | Black | __ | Plastic | Twist On | 5537T487 | 000 |
| 45mm | 90mm | __ | 1/16" | 3/8" | Black | __ | Plastic | Twist On | 5537T357 | 0000 |
Snap-close cable holders make it easy to access your cable and tubing.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For Max. Cable Wd. | Color | Material | Mount Type | Mounting Fasteners Included | Each | |
One Opening | |||||||||
| 1" | 2" | 3" | 1 1/16" | Black | Plastic | Twist On | __ | 47065T386 | 00000 |
| 1 1/2" | 3" | 4 1/2" | 1 1/16" | Black | Plastic | Twist On | __ | 47065T388 | 0000 |
| 20mm | 40mm | __ | 1 1/16" | Black | Plastic | Twist On | __ | 5537T834 | 0000 |
| 30mm | 60mm | __ | 1 1/16" | Black | Plastic | Twist On | __ | 5537T835 | 0000 |
| 40mm | 80mm | 120mm | 1 1/16" | Black | Plastic | Twist On | __ | 5537T836 | 0000 |
| 45mm | 90mm | __ | 1 1/16" | Black | Plastic | Twist On | __ | 5537T837 | 0000 |
Two Openings | |||||||||
| 1" | 2" | 3" | 7/16" | Black | Plastic | Twist On | __ | 47065T389 | 0000 |
| 1 1/2" | 3" | 4 1/2" | 7/16" | Black | Plastic | Screw On | Yes | 47065T6 | 0000 |
| 20mm | 40mm | __ | 7/16" | Black | Plastic | Twist On | __ | 5537T851 | 0000 |
| 30mm | 60mm | __ | 7/16" | Black | Plastic | Twist On | __ | 5537T852 | 0000 |
| 40mm | 80mm | 120mm | 7/16" | Black | Plastic | Twist On | __ | 5537T853 | 0000 |
| 45mm | 90mm | __ | 7/16" | Black | Plastic | Twist On | __ | 5537T854 | 0000 |
Hook and loop cable holders include a hook and loop that, unlike cable ties, you can reuse. The hook and loop adjusts, so these holders are better for bundles that change in size compared to snap-close holders. These holders allow easy access to your cables and tubing. They twist into a T-slot.
Clip-on cable holders have an opening that lets you easily move cable in and out of the holder without needing to unscrew it.
For Rail Ht. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | No. of Channels | For Max. Cable Wd. | Lg., ft. | Wd. | Ht. | Color | Material | Mount Type | Each | |
Three Openings | ||||||||||||
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 3 | 3/8" | 6 1/2 | 1 9/16" | 5/8" | Silver | Plastic | Snap In | 5537T227 | 000000 |
Wire duct mounts to a T-slot with the included screws or clips. Snap on the cover to enclose your bundle.
Slotted wire duct has fingers to hold wire and cable in, yet allow you to direct them in and out of the duct. Remove fingers to enlarge the opening. Solid wire duct completely covers your wire and cable.
Wire duct end caps mount to the ends of wire duct to keep out dust and grime.
Wire Duct | End Caps | Replacement Mounting Clips | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Ht. | Lg., ft. | Wd. | Ht. | Slot Wd. | Color | Material | Mount Type | Mounting Fasteners Included | Includes | Each | Each | Each | |||
Slotted | |||||||||||||||
| 1" | 6 1/2 | 1" | 1" | 0.24" | Gray | PVC Plastic | Screw On | Yes | __ | 5537T091 | 000000 | ______ | 00 | ______ | 00 |
| 1" | 6 1/2 | 1" | 1 1/2" | 0.31" | Gray | PVC Plastic | Screw On | Yes | __ | 5537T092 | 00000 | ______ | 00 | ______ | 00 |
| 1 1/2", 40mm | 6 1/2 | 1 1/2" | 1 1/2" | 0.32" | Gray | PVC Plastic | Screw On | Yes | __ | 5537T093 | 00000 | ______ | 00 | ______ | 00 |
| 45mm | 6 1/2 | 1 1/2" | 1 1/2" | 0.32" | Gray | PVC Plastic | Screw On | Yes | __ | 5537T094 | 00000 | ______ | 00 | ______ | 00 |
Solid | |||||||||||||||
| 1 1/2", 40mm | 9 3/4 | 1 1/2" | 1 1/2" | __ | Gray | PVC Plastic | Clip On | __ | Mounting Clips | 5537T909 | 00000 | 5537T996 | 00000 | 5537T095 | 00000 |
| 40mm, 80mm | 9 3/4 | 1 1/2" | 3" | __ | Gray | PVC Plastic | Clip On | __ | Mounting Clips | 5537T985 | 000000 | 5537T997 | 0000 | 5537T095 | 0000 |
| 80mm | 9 3/4 | 3" | 3" | __ | Gray | PVC Plastic | Clip On | __ | Mounting Clips | 5537T986 | 000000 | 5537T998 | 0000 | 5537T095 | 0000 |
Wire sleeving snaps into the grooves of your T-slot rail. It folds around cables and tubing and locks together like a zip-close bag—no disassembly or rewiring required to install it. It seals out water, dust, and debris. Made of PVC, this sleeving resists abrasion and won’t deteriorate from exposure to chemicals and oil. It’s also flame-rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Overall, it’s a good choice to protect wiring in harsh conditions from machine guards to conveyor lines.
90° raceway elbows (sold separately) snap onto the sleeve to protect your wiring in corners. They bend your wire evenly to avoid snag points.
Use the slider tool (sold separately) to speed up installation. Pinch the ends of the track together and slide the tool on, then pull it along the seam just like a zipper.
Wire Sleeving | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rail Ht. | 90° Raceway Elbows | Slider Tools | |||||||||||||
| Single | Double, Quad | Triple | For Max. Bundle Dia. | Lg., ft. | For T-Slot Wd. | Color | Material | Mount Type | Specifications Met | Each | Each | Each | |||
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 25/32" | 3 | 0.32", 8mm, 8.1mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N28 | 000000 | 8005N25 | 000000 | 8005N36 | 000000 |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 25/32" | 6 1/2 | 0.32", 8mm, 8.1mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N33 | 00000 | 8005N25 | 00000 | 8005N36 | 00000 |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 25/32" | 49 1/4 | 0.32", 8mm, 8.1mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N22 | 000000 | 8005N25 | 00000 | 8005N36 | 00000 |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 63/64" | 3 | 0.32", 8mm, 8.1mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N29 | 00000 | 8005N26 | 00000 | 8005N36 | 00000 |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 63/64" | 6 1/2 | 0.32", 8mm, 8.1mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N34 | 000000 | 8005N26 | 00000 | 8005N36 | 00000 |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 63/64" | 49 1/4 | 0.32", 8mm, 8.1mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N23 | 000000 | 8005N26 | 00000 | 8005N36 | 00000 |
| 25mm | 50mm | 75mm | 25/32" | 3 | 6mm, 6.5mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N27 | 00000 | 8005N25 | 00000 | 8005N36 | 00000 |
| 25mm | 50mm | 75mm | 25/32" | 6 1/2 | 6mm, 6.5mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N32 | 00000 | 8005N25 | 00000 | 8005N36 | 00000 |
| 25mm | 50mm | 75mm | 25/32" | 49 1/4 | 6mm, 6.5mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N21 | 000000 | 8005N25 | 00000 | 8005N36 | 00000 |
| 45mm | 90mm | 120mm | 25/32" | 3 | 10mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N31 | 00000 | 8005N25 | 00000 | 8005N36 | 00000 |
| 45mm | 90mm | 120mm | 25/32" | 6 1/2 | 10mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N35 | 000000 | 8005N25 | 00000 | 8005N36 | 00000 |
| 45mm | 90mm | 120mm | 25/32" | 49 1/4 | 10mm | Gray | PVC Plastic | Snap In | UL 224 VW-1 | 8005N24 | 000000 | 8005N25 | 00000 | 8005N36 | 00000 |
T-Slotted Framing Storage Components
Stay organized with these storage components that work with T-slotted framing.
For Rail Ht. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | No. of Holders | Wd. | Projection | Cap., lbs. | Material | Color | Mount Type | Mounting Fasteners Included | Each | |
5 Holders | ||||||||||||
| 1" | 2" | 3" | 5 | 17" | 3" | 25 | Zinc-Plated Steel | Silver | Screw On | Yes | 47065T078 | 000000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 5 | 17" | 3" | 25 | Zinc-Plated Steel | Silver | Screw On | Yes | 47065T079 | 00000 |
| 45mm | 90mm | __ | 5 | 17" | 3" | 25 | Zinc-Plated Steel | Silver | Screw On | Yes | 47065T081 | 00000 |
10 Holders | ||||||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 10 | 7 7/8" | 1 3/16" | 5 | Plastic | Black | Screw On | Yes | 47065T029 | 00000 |
13 Holders | ||||||||||||
| 1 1/2" | 3" | 4 1/2" | 13 | 11 7/8" | 3 3/8" | 55 | Powder-Coated Steel | Black | Screw On | Yes | 47065T075 | 00000 |
| 40mm | 80mm | 120mm | 13 | 11 7/8" | 3 3/8" | 55 | Powder-Coated Steel | Black | Screw On | Yes | 47065T076 | 00000 |
| 45mm | 90mm | __ | 13 | 11 7/8" | 3 3/8" | 55 | Powder-Coated Steel | Black | Screw On | Yes | 47065T077 | 00000 |