1 Gal. Tanks | McMaster-Carr

			Ports			Overall
	Cap., gal.	Max. Pressure, psi	Total No. of	Gender	Sizes	Lg.	Dia.	Ht.	Wall Thk.	Temp. Range, ° F	Certification	Includes	Cannot Be Sold To		Each
Horizontal without Mounting Plate







				Primed Steel

				1	200	7	Female	1/2 NPT Port (1 Ea.) 3/4 NPT Port (4 Ea.) 1 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.)	11 3/4"	6"	8"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	—	9888K9	0000000




						Epoxy-Lined Powder-Coated Steel

						1	200	7	Female	1/2 NPT Port (1 Ea.) 3/4 NPT Port (4 Ea.) 1 1/2 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.)	11 3/4"	6"	8"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	—	9908K19	000000




								316 Stainless Steel

								1	200	7	Female	1/2 NPT Port (1 Ea.) 3/4 NPT Port (4 Ea.) 1 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.)	12 3/4"	6"	8"	1/8"	-20 to 450	ASME BPVC.VIII.1	Plugs	Canada	9934K39	00000000


								Horizontal with Mounting Plate







												Primed Steel

												1	200	5	Female	3/4 NPT Port (3 Ea.) 1 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.)	11 3/4"	6"	9"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	—	9888K41	000000




														Epoxy-Lined Powder-Coated Steel

														1	200	5	Female	3/4 NPT Port (3 Ea.) 1 NPT Port (1 Ea.) 1/2 NPT Drain Port (1 Ea.)	11 3/4"	6"	9"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	—	9908K31	000000


														Vertical without Mounting Plate







																		Powder-Coated Steel

																		1	200	5	Female	1/2 NPT Port (1 Ea.) 3/4 NPT Port (2 Ea.) 1 NPT Port (1 Ea.) 3/4 NPT Drain Port (1 Ea.)	—	6"	13 1/2"	1/8"	-20 to 400	ASME BPVC.VIII.1	Plugs	—	1584K11	000000

Syringe Loading Tanks

Fill syringes quickly without the mess—these tanks use compressed air to push viscous liquid into a syringe. They hold up to a gallon of material, so you can fill many syringes one after another. To fill a syringe, connect a compressed air source to the tank, twist a syringe onto the dispenser, and slowly turn the ball valve. If you’re using a manually powered syringe, check first to make sure the plunger is fully depressed. For air powered ones, check that the stopper is fully inserted.

Monitor the tank’s pressure with a built-in gauge. An included regulator works to hold the tank pressure around the recommended 100 psi. If the pressure gets too high, pull the tab on the release valve. To prolong the life of the material in your tank, you should release the pressure after filling your last syringe.

Cannot Be Sold to Canada—These tanks cannot be sold to Canada due to safety regulations.

			Overall				Inlet				Outlet		Temp., ° F
	Cap., gal.	Max. Pressure @ 100° F, psi	Dia.	Ht.	Opening Dia.	No. of Inlets	Coupling Size	Connection	Gender	No. of Outlets	Connection	Gender	Min.	Max.	Features	Includes	Cannot Be Sold To		Each
Tanks Without Mounting Plate







				304 Stainless Steel

				1	100	10"	11 1/2"	6"	1	1/8	Quick Disconnect	Male	1	Luer Lock	Female	-20	100	Pressure Gauge, Safety Valve	Regulator	Canada	5670N1	000000000

Pressurized Liquid Dispensing Tanks

Attach a compressed air source to pressurize liquids for dispensing and spraying. Tanks have a dip tube that draws liquid from the bottom of the tank. All tanks meet the ASME rating for pressure vessels.

304 Stainless Steel—304 stainless steel tanks have good corrosion resistance.

316 Stainless Steel—316 stainless steel tanks have excellent corrosion resistance.

Cannot Be Sold to Canada—Tanks that cannot be sold to Canada are restricted due to safety regulations.

	Tanks																Lids
			Overall		Opening		Gauge Port				Temp., ° F
	Cap., gal.	Max. Pressure @ 100° F, psi	Dia.	Ht.	Lg.	Wd.	Pipe Size	Thread Type	Gender	No. of	Min.	Max.	Certification	Cannot Be Sold To		Each		Each
Tanks Without Mounting Plate







				304 Stainless Steel

				1	142	9"	9"	4 7/8"	5 7/8"	1/4	NPT	Female	4	-20	200	ASME BPVC.VIII.1	Canada	41665K18	0000000	4355T32	0000000


				1	205	9"	8"	3 1/4"	3 7/8"	1/4	NPT	Female	4	-20	200	ASME BPVC.VIII.1	Canada	41705K39	000000	4355T31	00000




						316 Stainless Steel

						1	132	9"	8"	4 7/8"	5 7/8"	1/4	NPT	Female	4	-20	300	ASME BPVC.VIII.1	Canada	41665K28	000000	4355T32	000000


						1	185	9"	8"	3 1/4"	3 7/8"	1/4	NPT	Female	4	-20	300	ASME BPVC.VIII.1	Canada	6778K18	000000	4355T31	00000

Accessories for Tanks

	For 3 7/8" Wide Opening	For 5 7/8" Wide Opening
EPDM Pressure Seal	4355T86	000000	4355T87	000000
Fluoroelastomer Seal	6778K6	00000	41665K8	00000

Tank Caps

Vacuum Closure Caps—Vacuum closure caps are required to use tanks in vacuum applications.

	For 3 7/8" Wide Opening		For 5 7/8" Wide Opening
Tank Component		Each		Each
Vacuum Closure Cap	6778K7	0000000	41665K9	0000000

Hydraulic Tanks

Style A

Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.

			Overall			Drain			Mounting
	Style	Cap., gal.	Lg.	Wd.	Ht.	Pipe Size	Dash Size	No. of Ports	Fasteners Included	No. of Holes	Hole Dia.	Max. Temp., ° F		Each
Steel







				Single Chamber Tanks

				A	1	6"	7 1/2"	12 1/4"	1/2 NPT	08	1	No	4	11/32"	250	1149K11	0000000

Accessories for Hydraulic Tanks

Pipe Suction Flanges

				Mounting Hole
For Pipe Size	For Cutout Dia.	Material	Mounting Fasteners Included	Ctr.-to-Ctr.	Lg	Wd.	Includes		Each
1/2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	62875K21	000000
3/4	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	62875K22	00000
1 1/4	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	62875K23	00000
1 1/2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	62875K24	00000
2	4 5/16"	Steel	Yes	4 1/4"	7/8"	7/16"	Top Plate, Bottom Plate, Gasket, Washer	62875K25	00000

Vents

Breather vents prevent excess pressure in tanks and allow a free flow of air.

					Cap
Pipe Size	Thread Type	Gender	Material	Removes Particle Size Down To, μm	Dia.	Ht.	Overall Ht.	Hex Wd.		Each



	1/2	NPT	Male	Plastic	40	1 5/8"	3/4"	1 7/8"	1"	62875K11	00000


	3/4	NPT	Male	Plastic	40	1 5/8"	3/4"	1 7/8"	1 1/8"	62875K12	0000

Flange-Mount Breather Vents

Flange

Mount

Breather vents prevent excess pressure in tanks and allow a free flow of air.

	Material						Strainer			Mounting Hole
For Cutout Dia.	Cap	Strainer	Gasket	Removes Particle Size Down To, μm	Cap Dia.	Flange Dia.	Dia	Ht.	Mounting Fasteners Included	Lg.	Wd.	Bolt Circle Dia.	Mount Type		Each
2 1/8"	Zinc-Plated Steel	Plastic	Rubber	40	3"	3 1/4"	1 7/8"	3 13/16"	Yes	1/4"	3/16"	2 7/8"	Flange	62875K13	000000

Level Indicators for Style A Tanks

Aluminum

Thread
Size	Type	Gender	Connection Ctr.-to-Ctr.	Overall Ht.	Window Ht.	Body Wd.	For Max. Tank Wall Thk.	Max. Pressure @ Temp.	Temp. Range, ° F	Material	Fitting Material	Window Material	Includes		Each
1/2"-20	UNF	Male	5"	6 5/8"	3 1/2"	7/8"	3/4"	290 psi @ 70° F	-40 to 250	Aluminum, Buna-N, Glass	Aluminum	Glass	Mounting Nuts	1106K85	000000

Flood Coolant Dispensers with Reservoir

Style A

These dispensers have a reservoir for recirculating coolant. They provide a constant flow of coolant, so they dissipate heat more efficiently than mist and droplet dispensers, making them suitable for cooling long machine cycles. Coolant strainers prevent debris from getting into the recirculated coolant.

Maximum flow rate and shut-off height are for water-soluble oil.

Shut-Off Height—Shut-off height is the maximum height to which the water-soluble oil can be pumped.

					Coolant Outlet			Nozzle				Reservoir
	Style	Cap., gal.	Max. Flow Rate @ ft. of Head	Max. Pressure, psi	No. of	Hose Lg., ft.	Hose Material	Lg.	Type	Material	Overall Ht.	Wd.	Dp.	Reservoir Material	Shut-Off Ht., ft.	For Max. SSU Viscosity Grade, SSU	Voltage, V AC	Features		Each
For Use With Coolant and Water



		A	1	108 gph @ 1 ft.	5	1	6	Vinyl Plastic	6"	Rigid	Polyethylene	9 3/8"	12"	6"	Polypropylene	11.5	100	120	Adjustable Flow, Coolant Strainer	43085K21	0000000

Rectangular Stainless Steel Batch Tanks

316 Stainless Steel—316 stainless steel is more corrosion resistant than 304 stainless steel.

	Tanks										Lids
					Bottom Inside
	Cap., gal.	Wd.	Dp.	Ht.	Wd.	Dp.	Ga.	Appearance		Each	Lid Type		Each
316 Stainless Steel



		1	10"	7 1/4"	7"	7 7/8"	5 1/8"	18	Dull	3763K106	0000000	Loose Fitting	3763K38	000000

Mist Coolant Dispensers with Reservoir


Style C	Style D	Style E	Style F

These dispensers have a reservoir and controls for coolant flow. Designed to cool short and intermittent machine cycles, misting dispensers dissipate heat more efficiently than droplet dispensers, while using considerably less fluid than flood dispensers.

Styles E and F—Styles E and F have any-which-way nozzles that stay in place once positioned.

					Coolant Outlet			Nozzle				Reservoir
	Style	Cap., gal.	Flow Rate @ Pressure	Max. Pressure, psi	No. of	Hose Lg., ft.	Hose Material	Lg.	Type	Material	Overall Ht.	Wd.	Dp.	Dia.	Reservoir Material	For Max. SSU Viscosity Grade, SSU	Air Inlet Pressure, psi		Each
For Use With Coolant and Water



		C	1	0.2 gph @ 100 psi	100	1	5	Brass	6"	Rigid	Brass	12 1/4"	10"	5 1/4"	—	Polyethylene	35	50 to 100	1324K86	0000000


		C	1	0.3 gph @ 100 psi	100	2	5	Brass	6"	Rigid	Brass	12 1/4"	10"	5 1/4"	—	Polyethylene	35	50 to 100	1324K34	000000
		D	1	6 gph @ 125 psi	125	1	4	Nylon	6"	Rigid	Brass	10 3/4"	7 3/4"	3 1/2"	—	Stainless Steel	Not Rated	30 to 120	1131K14	000000
		D	1	6 gph @ 125 psi	125	2	4	Nylon	6"	Rigid	Brass	10 3/4"	7 3/4"	3 1/2"	—	Stainless Steel	Not Rated	30 to 120	1131K18	000000
		E	1	6 gph @ 125 psi	125	1	4	Nylon	12"	Flexible	Acetal	10 3/4"	7 3/4"	3 1/2"	—	Stainless Steel	Not Rated	30 to 120	1131K16	000000


		For Use With Coolant, Water, and Cutting Oil



				F	1	Not Rated	120	1	4	Polyethylene	12"	Flexible	PVC	12"	—	—	7"	Steel	30	30 to 125	1199K31	000000


				F	1	Not Rated	120	2	4	Polyethylene	12"	Flexible	PVC	12"	—	—	7"	Steel	30	30 to 125	1199K32	000000

Accessories and Replacements for Coolant Dispensers

Replacement Hose

For Style	Component		Each
B, C	5-Ft. Brass Outlet Hose	1324K211	0000000
D	4-Ft. Nylon Plastic Outlet Hose with 45°-Angle Brass Nozzle	1131K53	00000
D, E	Coolant Inlet Hose	1131K64	00000
E	4-Ft. Nylon Plastic Outlet Hose with Any-Which-Way Plastic Nozzle	1131K65	000000
F	4-Ft. Polyethylene Plastic Outlet Hose with Stainless Steel Braid	1199K6	00000
F	5-Ft. Polyethylene Plastic Outlet Hose with Stainless Steel Braid	1199K57	00000
F, G	Coolant Inlet Hose	1199K62	00000

For Style	Component		Each
C	Sight Gauge	1324K16	000000

Replacement Coolant Nozzles

For Style	Component		Each
A, B, C	6" 45°-Angle Brass Nozzle	1324K244	000000
A, B, C	6" 90°-Angle Brass Nozzle	1324K255	00000
A, B, C	6" Straight Brass Nozzle	1324K233	00000
D	Magnetic Nozzle Mount	1131K24	00000
E	1 1/4" Brass Dispensing Tip	1131K58	00000
F	12" Any-Which-Way Plastic Nozzle with Base	1199K55	00000

For Style	Component		Each
D, E	Coolant Inlet Hose Ball Check	1131K63	000000

For Style	Component		Each
D, E	Valve Block	1131K61	000000

For Style	Component		Each
D, E	Valve Stem	1131K62	000000

For Style	Component		Each
F, G	1/16" Brass Tube Fitting for Steel	1199K65	000000

For Style	Component		Each
F, G	Air-Control Assembly	1199K64	000000
F, G	Liquid-Control Assembly	1199K63	00000

		Each
On/Off Air Switch for Styles D and E	1131K21	000000

Round Stainless Steel Batch Tanks

Style A

Style A have clamps to hold lid down.

Bottom ID	Ga.	Appearance	Lid Type	Seal Material	Includes		Each







316 Stainless Steel

1	7 3/4"	7 1/4"	7 1/8"	23	Polished	Tight Fitting	Silicone Rubber	Lid	41815T8	0000000

Oil Reservoirs

Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush (each sold separately) to create a dispenser.

140° F Maximum Temperature

Reservoirs with 140° F max. temp. have NPTF (Dryseal) threads, which are compatible with NPT threads. Flow rate depends on temperature.

							For Max. Viscosity
	Cap., gal.	Bowl Dia.	Overall Ht.	Housing Material	Bowl Material	Pressure Regulation Method	ISO Grade	SAE Grade	SSU Grade	AGMA Grade		Each
3/8 NPTF Male Outlet



		1	5 1/2"	14 15/16"	Aluminum	Plastic	Vented	Not Rated	Not Rated	Not Rated	Not Rated	1169K45	0000000


		1/2 NPTF Male Outlet



				1	5 1/2"	15 1/4"	Aluminum	Plastic	Vented	Not Rated	Not Rated	Not Rated	Not Rated	1169K46	000000

Food and Beverage Round Metal Batch Tanks

Style A

These metal batch cans meet NSF/ANSI 2 standards for food-processing equipment.

Style A

Tanks									Lids
Cap., gal.	Dia.	Ht.	Bottom ID	Ga.	Appearance	Food Industry Std.		Each	Lid Type		Each







			300 Series Stainless Steel

			1	6 1/2"	7 5/8"	6 3/8"	22	Dull	NSF/ANSI 2	4173T14	000000	Loose Fitting	4173T24	000000

Fuel Cans


Style A	Replacement Spouts

Carry and store petroleum-based liquids in these sturdy cans. Color-coding indicates usage: red for gasoline, yellow for diesel, and blue for kerosene. The spout automatically closes to prevent spills. Push the button to pour.

	Fuel Cans													Replacement Spouts
							Spout
	Style	Cap., gal.	Lg.	Wd.	Ht.	Fill Opening Dia.	Lg.	OD	Flexibility	Specs. Met	Color		Each		Each
For Gasoline







				Polyethylene

				A	1	8 1/8"	5 7/8"	8"	1 5/8"	5"	1 3/8"	Rigid	CARB Compliant EO G-18-082, EPA Compliant 40 CFR 59	Red	4224T81	000000	4224T96	000000

Electric Melting Pots

Melt coatings, adhesive, wax, tar, and alloys with low melting points. These pots have an internal heating element that ensures fast and even heat transfer. Stir contents periodically to prevent damage to the inside of the pot.

Round with Lid

					Overall					Electrical
	Cap., gal.	Temp. Setting, ° F	ID	Inside Ht.	Dia.	Ht.	Material	Wattage, W	Electrical Connection Type	Connection	No. of Blades	NEMA Type	Cord Lg., ft.		Each
Adjustable Temperature Setting—120V AC



		1	60 to 450	7 1/2"	7"	10 3/4"	10 1/2"	Aluminum	840	Plug In	Straight Blade	3	5-15	6	3233K83	0000000

Rectangular

			Inside			Overall						Electrical
	Cap., gal.	Temp. Setting, ° F	Ht.	Wd.	Dp.	Ht.	Wd.	Dp.	Material	Wattage, W	Electrical Connection Type	Connection	No. of Blades	NEMA Type	Cord Lg., ft.		Each
Adjustable Temperature Setting—120V AC



		1	150 to 900	6"	12"	3"	9"	16"	10"	Iron	1,560	Plug In	Straight Blade	3	5-15	6	3411K85	000000000

Safety Cans for Nonflammable Acids and Corrosives Disposal

Store leftover hazardous liquids until they can be properly discarded. Made of plastic to resist harsh acids and corrosives, this safety disposal can has a self-closing cap to prevent spills and a trigger handle to empty contents with one hand.

Plastic

Cap., gal.	Lg.	Wd.	Ht.	Fill Opening OD	Graduations	Color		Each
1	7 3/4"	4 3/4"	12 3/4"	1 1/2"	1 qt./1 gal./1 L	Semi-Clear White	8989T11	000000

Safety Cans


Style C	Style D	Style F

Also known as Type I safety cans, these have a single opening for both filling and pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; and a flame arrester.

Powder-Coated Steel


Style C	Rigid Plastic Pour Spout	Flexible Steel Pour Spout

Powder-coated steel cans are for petroleum-based liquids.

Color—Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Cans										Rigid Plastic Pour Spouts		Flexible Steel Pour Spouts
Style	Cap., gal.	Dia.	Ht.	Fill Opening Dia.	Certification	Flammability Rating	Choose a Color		Each		Each		Each
C	1	9 1/2"	11"	1 5/8"	UL Listed, C-UL Listed, FM Approved	NFPA 30, OSHA Compliant 29 CFR 1910.106	Red, Yellow, Blue, Green	4290T5	000000	4290T36	000000	4290T35	000000

316 Stainless Steel

Style D

Stainless steel cans are corrosion resistant and often used with liquids such as acetone, ether, toluene, and xylene.

Style	Cap., gal.	Lg.	Wd.	Ht.	Fill Opening Dia.	Certification	Flammability Rating		Each
D	1	8"	4 3/4"	13"	1 1/2"	UL Listed, C-UL Listed, FM Approved	NFPA 30, OSHA Compliant 29 CFR 1910.106, OSHA Compliant 29 CFR 1926.152	4291T19	0000000

Polyethylene

Style F

Polyethylene cans won't rust, dent, or pit and are for chemicals and corrosives.

Color—Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Style	Cap., gal.	Lg.	Wd.	Ht.	Fill Opening Dia.	Certification	Color		Each
F	1	7 3/4"	4 3/4"	12 3/4"	1 5/8"	FM Approved	Red	4479T22	0000000

Vacuum Degassing Chambers

304 Stainless Steel with

Top-Mount Gauge

Also known as vacuum degassing chambers, these remove trapped air from mixtures such as paint and mold resins. The fittings on the hose contain a gasket that allows you to connect the hose to flared fittings.

304 Stainless Steel—304 stainless steel chambers have excellent corrosion resistance and are commonly used in laboratories.

Acrylic Plastic Lid—Acrylic lids are more durable than glass lids. They’re commonly used to eliminate air bubbles in hard setting materials, such as silicone and polyurethane.

Replacement Lids—Replacement lids do not include hardware or seal.

	Chambers																	Replacement Lids
					Gauge			Hose
	Cap., gal.	Dia.	Ht.	Bottom ID	Vacuum Range, in. Hg	Accuracy	Graduations, in. Hg	Lg., ft.	Thread Size	Gender	For Fitting Connection	For Tube OD	Max. Temp., ° F	Removes Particle Size Down To, μm	Includes		Each		Each
304 Stainless Steel with Top-Mount Gauge







				Acrylic Plastic Lid with Silicone Rubber Seal

				1	11 1/4"	4"	10 1/4"	0 to 30	±5%	0.5	5	7/16"-20 UNF	Female	37° Flared, 45° Flared	1/4"	150	50	50 Micron Air Filter, Lid	1931N31	0000000	1931N48	0000000

Replacement Filters

Air-Powered Oil Dispensers

Connect these dispensers to your air system to pressurize the oil in the reservoir and atomize the spray. Dual regulators allow you to adjust the pressure of the oil and the atomized spray. Add a spray valve (sold separately) to direct the flow of oil. A removable filter prevents valve blockage. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

			Overall				Air Inlet			Air Outlet
	Cap., gal.	Max. Oil Outlet Pressure, psi	Ht.	Wd.	Dp.	Max. Air Inlet Pressure, psi	Thread Type	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Temp. Range, ° F	Mounting Hole Thread Size	For Max. ISO Viscosity Grade		Each
1/8 NPTF Female Oil Outlet



		1	30	19 1/4"	5 13/16"	5 13/16"	125	NPTF	1/4	Female	NPTF	1/8	Female	-30 to 140	5/16"-24	150	12745K54	0000000

Accessories and Replacements for Oil Dispensers

Spray Valves

		Oil Inlet			Air Inlet			Flat Spray Pattern		Round Spray Pattern
Nozzle Material	Body Material	Thread Type	Pipe Size	Gender	Thread Type	Pipe Size	Gender		Each		Each
Brass	Aluminum	NPTF	1/8	Female	NPTF	1/8	Female	12745K71	0000000	12745K72	0000000

Remote-Access Oil Dispensers with Flow-Adjustment Valve

Connect a tube fitting and tubing (not included) to the dispenser outlet to access hard-to-reach lubrication points. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

								For Max. Viscosity
	Cap., gal.	Bowl Dia.	Overall Ht.	Housing Material	Bowl Material	Pressure Regulation Method	Mounting Thread Size	ISO Grade	SAE Grade	SSU Grade, SSU	AGMA Grade	Features	Includes		Each
160° F Maximum Temperature







				1/8 NPTF Female Oil Outlet

				1	5 1/2"	16 5/16"	Aluminum	Plastic	Vented	5/8"-18	320	90	1,500	6	Glass Flow Sight	Nut, Washer	1175K15	0000000

Parts Washing Cans

Sized to fit on a benchtop, these cans save space and solution when cleaning small parts. They have a fusible link that closes the cover in the event of a fire.

	OD	Overall Ht.	Material	Certification		Each
For Solvent-Based Solutions



	1	9 1/2"	5 1/2"	Steel	FM Approved, UL Listed	3397K14	0000000

Parts Washing Cans with Removable Basket

Easily insert and remove parts from these cans. Good for small cleaning jobs, they save space and solution. A fusible link closes the cover in the event of a fire.

							Basket
	Cap., gal.	OD	Overall Ht.	Material	Certification	Includes	OD	Ht.	Mesh Opening Dia.	Material		Each
For Solvent-Based Solutions



		1	9 1/2"	10"	Steel	FM Approved, UL Listed	Basket	6 7/8"	4 7/8"	0.094"	Steel	3397K22	0000000

Oil Dispensers with Flow-Adjustment Valve

Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

							For Max. Viscosity
	Cap., gal.	Bowl Dia.	Overall Ht.	Housing Material	Bowl Material	Pressure Regulation Method	ISO Grade	SAE Grade	SSU Grade, SSU	AGMA Grade	Features		Each
160° F Maximum Temperature







				1/2 NPTF Male Oil Outlet

				1	5 1/2"	17 1/16"	Aluminum	Plastic	Vented	320	90	1,500	6	Glass Flow Sight	1167K19	0000000

Replacement Flow Sights

Multiple-Outlet Electrically Operated Oil Dispensers with Flow-Adjustment Valves


2 Outlets	3 Outlets	4 Outlets	6 Outlets

Serve multiple lubrication points from a single location. These dispensers have a solenoid that automatically starts and stops flow so lubrication is dispensed only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. To adjust the flow to individual lubrication points, turn the dial on the corresponding valve. Dispensers can be used with any oil grade. Flow rate depends on temperature.

			Overall
	Cap., gal.	Bowl Dia.	Ht.	Wd.	Housing Material	Bowl Material	Pressure Regulation Method	Max. Temp., ° F	Mounting Thread Size	Features	Electrical Connection Type	Wire Connection		Each
120V AC 0.1 amp







				2 Oil Outlets—For 1/4" OD Oil Outlet Tubes

				1	5 1/2"	16 3/4"	4 3/8"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	Hardwire	Wire Leads	1065K16	0000000




						3 Oil Outlets—For 1/4" OD Oil Outlet Tubes

						1	5 1/2"	16 3/4"	5"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	Hardwire	Wire Leads	1065K36	000000




								4 Oil Outlets—For 1/4" OD Oil Outlet Tubes

								1	5 1/2"	16 3/4"	5 7/8"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	Hardwire	Wire Leads	1065K46	000000




										6 Oil Outlets—For 1/4" OD Oil Outlet Tubes

										1	5 1/2"	16 3/4"	7 3/8"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	Hardwire	Wire Leads	1065K66	000000


										24V DC 0.4 amp







														2 Oil Outlets—For 1/4" OD Oil Outlet Tubes

														1	5 1/2"	16 3/4"	4 3/8"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	Hardwire	Wire Leads	1065K26	000000




																3 Oil Outlets—For 1/4" OD Oil Outlet Tubes

																1	5 1/2"	16 3/4"	5"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	Hardwire	Wire Leads	1065K86	000000




																		4 Oil Outlets—For 1/4" OD Oil Outlet Tubes

																		1	5 1/2"	16 3/4"	5 7/8"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	Hardwire	Wire Leads	1065K56	000000




																				6 Oil Outlets—For 1/4" OD Oil Outlet Tubes

1																				5 1/2"	16 3/4"	7 3/8"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	Hardwire	Wire Leads	1065K76	000000

Replacements for Oil Dispensers

Plastic Hand-Pump Sprayers


Style A	Style B	Style C

Style D	Style F

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. Made of lightweight plastic, the tank on these sprayers resists chemicals and impact. They’re often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Warning: Face the nozzle away from you to safely release pressure from the relief valve. If there’s no relief valve, place the tank on its side with the top pointed away from you before you release.

Cone Dispensing—Sprayers with a cone nozzle are good for everyday cleaning.

Flat Dispensing—The flat nozzle is useful for creating powerful coverage over a wide area.

Mist Dispensing—To clean delicate equipment or cool machinery, use the mist nozzle.

Stream Dispensing—Remove stuck-on material with the stream nozzle.

Viton® Fluoroelastomer Seal—Viton® fluoroelastomer seals are chemical resistant, so you can spray oils, acids, and solvents without damaging the seal.

Polypropylene—Polypropylene wands resist most chemicals. They are lighter than stainless steel but are less durable.

Aluminum—Aluminum wands are durable but can corrode when exposed to strong chemicals.

Internal Pressure Regulator—Sprayers with an internal pressure regulator keep pressure at or below 55 psi.

Pressure-Relief Valve—Sprayers with a pressure-relief valve let you release the air inside safely without being sprayed.

Repair Kits—Add a repair kit to replace worn or damaged components, such as the check valve or O-rings.

	Sprayers																Repair Kits		Replacement Trigger and Wand Kits
	Style	Cap., gal.	Dia.	Ht.	Tank Material	Seal Material	Wand Material	Color	Hose Lg.	Wand Lg.	Fill Opening Dia.	Graduations	Features	Includes		Each		Each		Each
Cone/Stream Dispensing



		A	1	7"	15 1/2"	Polyethylene	Buna-N	Polypropylene	White	40"	12"	4 5/8"	1/2 gal. 1 gal. 2 L 4 L	Continuous Spray, Internal Pressure Regulator, Reinforced Hose	Shoulder Strap	6878N319	000000	6878N317	000000	6878N912	000000


		A	1	7 1/2"	16"	Polyethylene	Buna-N	Aluminum	White	36"	15"	2"	1/2 gal. 1 gal. 1 L	Continuous Spray, Reinforced Hose	—	6878N347	00000	6878N343	0000	6878N916	0000


		Mist/Stream Dispensing



				B	1	6 11/16"	16 1/4"	Polyethylene	Buna-N	Polypropylene	White	36"	14"	1 3/4"	—	Continuous Spray, Filter, Pressure-Relief Valve, Reinforced Hose	—	6878N328	00000	———	0	———	0


				Cone/Flat/Stream Dispensing



						A	1	7 1/4"	15 1/2"	Polyethylene	Viton® Fluoroelastomer	Polypropylene	White	40"	18"	4 1/2"	1/2 gal. 1 gal. 2 L 4 L	Continuous Spray, Internal Pressure Regulator, Reinforced Hose	Shoulder Strap	6878N318	00000	6878N316	00000	6878N911	00000


						A	1	8 1/2"	16 1/2"	Polyethylene	Buna-N	Polypropylene	White	36"	14"	2"	1/2 gal. 1 gal. 1 L	Continuous Spray, Filter	Spray Shield	6878N346	00000	6878N343	0000	6878N921	0000


						Cone/Mist/Stream Dispensing



								D	1	7 1/2"	15"	Polyethylene	Buna-N	Polypropylene	White	34"	12"	2"	1/2 gal. 2 L	Continuous Spray, Filter, Reinforced Hose, Wand Holder	Measuring Cup, Spray Shield, Tool Holder Clip	6878N14	00000	6878N101	00000	6878N104	00000


								F	1	7"	13 1/2"	Polyethylene	Buna-N	Polypropylene	White	34"	12"	3"	1/2 gal. 2 L	Continuous Spray, Extended Handle, Filter, Pressure-Relief Valve, Reinforced Hose, Wand Holder	—	6878N17	00000	6878N101	00000	6878N104	00000


								Flat/Mist/Stream Dispensing



										C	1	7"	18 1/2"	Polyethylene	Viton® Fluoroelastomer	Polypropylene	White	50"	15"	2"	—	Carrying Handle, Continuous Spray, Filter, Pressure-Relief Valve, Reinforced Hose	Shoulder Strap	6878N325	00000	———	0	———	0

Electrically Operated Oil Dispensers with Flow-Adjustment Valve

A solenoid automatically starts and stops flow to dispense lubricant only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature.

			Overall							120V AC 0.1 amp		24V DC 0.4 amp
	Cap., gal.	Bowl Dia.	Ht.	Wd.	Housing Material	Bowl Material	Pressure Regulation Method	Max. Temp., ° F	Mounting Thread Size		Each		Each
For 1/4" OD Oil Outlet Tubes



		1	5 1/2"	16 5/16"	6 3/4"	Aluminum	Plastic	Vented	160	5/8"-18	1070K28	0000000	1070K48	0000000

Replacement Solenoid Coils

Safety Cans with Built-In Spout

Style A

Also known as Type II safety cans, these have two openings—one for filling, one for pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; flame arrester; and a vacuum-release valve for controlled pouring.

Powder-Coated Steel

Style A

Color—Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Cans												Replacement Spouts
					Spout
Style	Cap., gal.	Dia.	Ht.	Fill Opening Dia.	Lg.	OD	Flexibility	Certification	Choose a Color		Each		Each
A	1	9 1/2"	10 1/2"	1 1/2"	9"	5/8"	Flexible	UL Listed, C-UL Listed	Red, Yellow, Blue, Green	4290T31	0000000	4290T42	000000

Multiple-Outlet Oil Dispensers with Flow-Adjustment Valves


2 Outlets	3 Outlets	6 Outlets

Serve multiple lubrication points from a single location. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Change the reservoir flow by turning the dial on the bowl. Flip the lever to start and stop flow to all of the valves at once. Dispensers can be used with any oil grade. Flow rate depends on temperature.

			Overall
	Cap., gal.	Bowl Dia.	Ht.	Wd.	Housing Material	Bowl Material	Pressure Regulation Method	Max. Temp., ° F	Mounting Thread Size	Features		Each
2 Oil Outlets—For 1/4" OD Oil Outlet Tubes



		1	5 1/2"	19 1/16"	4 3/8"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	1067K16	0000000


		3 Oil Outlets—For 1/4" OD Oil Outlet Tubes



				1	5 1/2"	19 1/16"	5 1/8"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	1067K36	000000


				6 Oil Outlets—For 1/4" OD Oil Outlet Tubes



						1	5 1/2"	19 1/16"	7 3/8"	Aluminum	Plastic	Vented	140	5/8"-18	Glass Flow Sight	1067K56	000000

Easy-Drain Parts Washing Cans

Push down on the spring-loaded drain plate to submerge and agitate to clean parts. The drain plate acts as a flame arrester in the event of a fire.

				Drain Plate
	Cap., gal.	OD	Overall Ht.	Dia.	Material	Material	Certification	Includes		Each
For Solvent-Based Solutions



		1	9 1/2"	4 1/2"	7 1/2"	Steel	Steel	FM Approved	—	3406K6	000000


		1	9 1/2"	4 1/2"	7 1/2"	Steel	Steel	FM Approved	6" Dia. × 1/2" Ht. Steel Parts Tray	3406K3	000000

Heavy Duty Plastic Hand-Pump Sprayers

These sprayers have a more durable construction than our other plastic hand-pump sprayers. They have a large fill opening for easy filling and cleaning. Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. They are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Replacement Trigger and Wand Kits—Replacement trigger and wand kits do not include nozzles.

	Sprayers												Repair Kits		Replacement Trigger and Wand Kits
	Cap., gal.	Dia.	Ht.	Tank Material	Seal Material	Clarity	Color	Hose Lg.	Wand Lg.	Fill Opening Dia.		Each		Each		Each
Cone/Mist/Stream Dispensing



		1	7 3/4"	15 1/2"	Polyethylene	Viton® Fluoroelastomer	Semi-Clear	White	48"	16"	4"	7095T12	000000	7095T14	00000	7095T13	000000

		Each
24V DC Replacement Coil	1065K18	0000000
Replacement Flow-Adjustment Valve	1065K87	00000
120V AC Replacement Coil	1065K88	000000

		Each
24V DC Replacement Coil	1065K18	0000000
120V AC Replacement Coil	1065K88	000000