Use a single set for many sizes of internal and external threads. The taps and dies are for use on most metal and plastic.

To extract taps of different sizes, these sets include multiple extractors. Fingers on the extractor grip the flutes on a broken tap. Use with a tap wrench to remove taps with straight flutes from the workpiece.

Made of a high-vanadium alloy, these taps are harder and more wear-resistant than other high-speed steel taps. The flute design prevents buildup to protect the quality of the threads and avoid damage to the tap. Since you don’t need to reverse these taps to extract chips, they also create threads faster.

Remove long, stringy chips to produce cleaner threads than standard taps. The flute design prevents buildup to protect the quality of the threads and avoid damage to the tap. Since you don’t need to reverse these taps to extract chips, they also create threads faster.

Match the size of helical inserts so they fit tightly when installed in the hole.

Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.

Fingers on the extractor grip the flutes on a broken tap. Use with a tap wrench to remove taps with straight flutes from the workpiece without damaging the surrounding threads.

Thread holes 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, these taps are built to handle the high torque of impact wrenches to cut material quickly. Your wrench’s rapid hammering keeps these taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. This also means the tap is less likely to jam on chips and snap.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench. You can also get chucks for impact drivers (sold separately).