View a wire gauge conversion chart.
About Stainless Steel
More
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Copper, Brass, and Bronze
More
About Aluminum
More
Wear-Resistant High-Strength Twine
The braided construction makes this twine more wear resistant and less likely to unravel than twisted twine. It is nylon for a good balance between stretch and strength. It resists UV rays and rot.
Grip-Tight High-Strength Twine
The twisted construction lets you tightly grip this twine without it slipping. Twine is nylon for a good balance between stretch and strength. It resists UV rays and rot.
Comfort-Grip Twine
This twine is made of soft cotton, so you can grip it without hurting your hands.
| Dia. | Twine Trade Size | Breaking Strength, lbs. | Application | Color | Lg., ft. | Each | |
Cotton | |||||||
|---|---|---|---|---|---|---|---|
1 lbs. Ball | |||||||
| 0.125" | 72 | 120 | Not for Lifting | White | 250 | 0000000 | 000000 |
Lead Wire
- Temper Rating: Softened
- Tensile Strength: 1,100 psi
- Specifications Met: ASTM B29, ASTM B749
This material has a minimum of 99.5% pure lead content. Bend this wire and it will stay in place. It is often used for bearing alignment and caulking.
For technical drawings and 3-D models, click on a part number.
Spring-Back Multipurpose 304 Stainless Steel Wire
This wire bounces back after bending. Often used to construct springs and wire rope, 304 stainless steel is a good all-around choice for a wide range of applications.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Bend-and-Stay Multipurpose 304 Stainless Steel Wire
Bend this wire and it will stay put. Frequently used as tying wire and locking wire, 304 stainless steel is a good all-around choice for a wide range of applications.
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 75,000 psi
- Specifications Met: ASTM A580, MS20995
Bend-and-Stay Economical 430 Stainless Steel Wire
When bent, this wire will stay in place. Widely used as tying and locking wire, this economical wire won’t stand up as well as other stainless steel wire when used outdoors or in extreme temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Temper Rating: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM A580
1 ft. Lg. | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Matte | |||||
| 0.125" | -0.001" to 0.001" | 300° | 10 | 00000000 | 000000 |
Bend-and-Stay Corrosion-Resistant 316 Stainless Steel Wire
Bend this wire and it will stay in place. It's widely used as tying and locking wire. Made of 316/316L stainless steel, it has less carbon than standard 316 for better weldability. The addition of molybdenum gives this material excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM A580
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM A580
30 ft. Lg. | ||||
|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Each | |
Matte | ||||
| 0.125" | -0.001" to 0.001" | 400° | 000000000 | 000000 |
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM A580
1 ft. Lg. | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Matte | |||||
| 0.125" | -0.001" to 0.001" | 400° | 5 | 000000000 | 00000 |
Spring-Back Corrosion-Resistant 316 Stainless Steel Wire
- Heat Treatable: No
- Tensile Strength: 222,000 psi
- Specifications Met: ASTM A313
This wire will spring back after bending. It's often used to make springs and wire rope. The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
1 lbs. Coil | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Lg., ft. | Each | |
Matte | |||||
| 1/8" | -0.001" to 0.001" | 570° | 23 | 00000000 | 000000 |
Bend-and-Stay Wear-Resistant 410 Stainless Steel Wire
Bend this wire and it will stay in place. It's commonly used as tying and locking wire. 410 stainless steel withstands wear caused by abrasion.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Heat Treatment: Annealed (Softened)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Not Rated
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM A580
1/4 lbs. Coil | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Fabrication | Max. Temperature, °F | Lg., ft. | Each | |
Matte | ||||||
| 0.125" | -0.001" to 0.001" | Cold Drawn | 300° | 6 | 0000000 | 000000 |
Multipurpose 400 Nickel Wire
- Temper Rating: Softened (Annealed)
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM B164
Bend this wire and it will stay in place. It is often used as safety lock wire. From marine hardware to chemical-processing equipment, 400 nickel is widely used for its strength, weldability, and formability. Comparable to Monel, this nickel-copper alloy will stand up to highly corrosive environments, such as those involving salt water, sulfuric acid, and alkalies.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
1 lbs. Spool | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Lg., ft. | Each | |
Matte | |||||
| 0.125" | -0.001" to 0.001" | 700° | 21 | 0000000 | 0000000 |
Lubricated 1065 Spring Steel Wire
- Heat Treatment: Hardened
- Tensile Strength: 195,000 psi
- Specifications Met: ASTM A229, MIL-W-21425 Type 1
This wire is coated with oil for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Lubricated 1080 Spring Steel Wire
- Heat Treatment: Hardened
- Tensile Strength: 261,000 psi
- Specifications Met: ASTM A228
Also known as music wire. This wire is coated with phosphate for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.
High-Temperature Nickel-Clad Copper
- Temper Rating: Softened (Annealed)
- Tensile Strength: 80,000 psi
- Specifications Met: ASTM B355
This copper wire is clad in nickel to provide excellent corrosion resistance at temperatures up to 1200° F while maintaining high electrical conductivity. It has a soft temper and will stay in place when bent.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Easy-to-Form 1100 Aluminum Wire
- Yield Strength: 3,500 psi
- Hardness: Not Rated (Soft)
- Temper: O
- Fabrication: Cold Drawn
- Specifications Met: ASTM B211
This wire has a soft temper and will stay in place when bent. Use it as tie wire and for bundling. Because 1100 aluminum is 99% pure, it offers superior formability, corrosion resistance, and electrical conductivity.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Lg., ft. | Heat Treatment | Max. Temperature, °F | Tensile Strength, psi  | Net Weight, lbs. | Type | Each | |
| 0.125" | -0.002" to 0.002" | 830 | Annealed (Softened) | 200° | 11,000 | 12 | Coil | 0000000 | 0000000 |
Ultra-Corrosion-Resistant Grade 2 Titanium Wire
- Temper Rating: Softened (Annealed)
- Tensile Strength: 50,000 psi
- Specifications Met: ASTM B863
Bend this wire and it will stay in place. Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical-processing equipment, heat exchangers, and marine hardware.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.