Toggle Clamp Holding Screws

Filter by

System of Measurement

Inch

Metric

Holding Screw Thread Size

Clamping Action

Thread Size

Length

Holding Screw Tip Material

Material

Mount Type

Holding Screw Tip Shape

Conical

Flat

Holding Screw Tip Diameter

Holding Screw Tip Type

Rigid

Swivel

Holding Screw Thread Length

Holding Screw Material

Diameter

Shape

Fastener Head Type

RoHS

Compliant with Exemptions

Not Compliant

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Overall Diameter

Width

Tip Diameter

Thread Pitch

118 Products

Toggle Clamp Holding Screws


With Rubber Rigid Flat Tip	With Rubber Rigid Conical Tip

With Rubber Swiveling Flat Holding Screw Tip	With Steel Rigid Flat Tip

With Steel Swiveling Flat Tip	With Stainless Steel Rigid Flat Tip

Replace worn screws or customize your clamps.

	Holding Screw				Steel Clamp Holding Screws		Stainless Steel Clamp Holding Screws
	Thread Size	Thread Lg.	Tip Dia.	Overall Lg.		Each		Each
With Rubber Rigid Flat Tip



		8-32	3/4"	9/16"	1"	5147A56	00000	5147A88	00000


		8-32	1"	9/16"	1 1/4"	5147A57	0000	———	0
		10-32	1"	9/16"	1 3/8"	5147A61	0000	5147A16	0000
		1/4"-20	5/8"	11/16"	1"	5147A58	0000	———	0
		1/4"-20	1 1/8"	5/8"	1 5/8"	5147A62	0000	5147A17	0000
		1/4"-20	1 1/8"	11/16"	1 1/2"	5147A59	0000	———	0
		1/4"-20	1 5/8"	5/8"	2 1/8"	5147A63	0000	5147A18	0000
		1/4"-20	1 3/4"	19/32"	1 29/32"	———	0	5147A98	0000
		5/16"-18	1 5/8"	13/16"	2 1/4"	5147A64	0000	5147A19	0000
		5/16"-18	2 3/8"	13/16"	3"	5147A65	0000	5147A84	0000
		3/8"-16	2 3/8"	1"	3 1/4"	5147A66	0000	5147A85	00000


		3/8"-16	2 1/2"	7/8"	3 1/2"	5147A67	0000	———	0
		3/8"-16	4 7/8"	1"	5 3/4"	5147A68	0000	———	0
		1/2"-13	2 3/4"	1 3/16"	3 7/8"	5147A69	0000	———	0
		5/8"-11	3 5/8"	1 3/8"	5"	5147A71	00000	———	0
		M4	13/16"	5/16"	7/8"	5147A76	0000	———	0
		M4	1 3/16"	5/16"	1 1/4"	5147A21	0000	———	0
		M5	1"	3/8"	1 1/8"	5147A78	0000	———	0
		M5	1 3/8"	3/8"	1 9/16"	5147A79	0000	———	0
		M6	5/8"	11/16"	1"	5147A94	0000	———	0
		M6	1 3/16"	5/8"	1 3/4"	5147A23	0000	———	0


		M6	1 5/8"	5/8"	2 1/8"	5147A24	0000	———	0
		M8	1 3/8"	13/16"	2 1/8"	5147A25	0000	———	0
		M8	1 3/4"	7/8"	2 1/2"	5147A75	0000	———	0
		M8	2 5/8"	13/16"	3 3/8"	5147A26	0000	———	0
		M10	2 3/16"	1"	3 1/8"	5147A92	0000	———	0
		M10	3 3/4"	1"	4 3/4"	5147A91	0000	———	0
		M12	2 7/8"	1 3/16"	4 1/8"	5147A93	0000	———	0


		With Rubber Rigid Conical Tip



				10-32	1"	9/16"	1 1/2"	5147A81	0000	———	0


				1/4"-20	1 5/8"	3/4"	2 1/4"	5147A82	0000	———	0
				5/16"-18	2 3/8"	3/4"	3"	5147A83	0000	———	0
				5/16"-18	4 3/4"	3/4"	5 1/2"	5147A95	0000	———	0
				3/8"-16	2 1/2"	7/8"	3 1/2"	5147A77	0000	———	0


				With Rubber Swiveling Flat Holding Screw Tip



						1/4"-20	1 5/8"	1"	2 5/8"	5147A72	00000	———	0


						5/16"-18	2"	1 1/2"	3"	5147A73	00000	———	0
						3/8"-16	2 1/2"	2"	3 5/8"	5147A74	00000	———	0


						With Steel Rigid Flat Tip



						8-32	1"	1/4"	1 3/32"	5147A97	0000	———	0


						5/16"-18	1 3/4"	1/2"	2"	5147A101	0000	———	0


						With Steel Swiveling Flat Tip



								1/4"-20	1 5/8"	1/2"	2 1/2"	5147A28	0000	———	0


								5/16"-18	2"	9/16"	2 3/4"	5147A29	0000	———	0
								3/8"-16	2"	5/8"	3 1/8"	5147A31	0000	———	0
								3/8"-16	2 1/2"	5/8"	3 3/8"	5147A32	0000	———	0
								1/2"-13	3 1/2"	1"	4 5/8"	5147A33	00000	———	0


								With Stainless Steel Rigid Flat Tip



										10-32	1"	5/16"	1 1/8"	———	0	5147A99	0000


										M4	13/16"	5/16"	29/32"	———	0	5147A102	0000

Toggle Clamp Holding Screw Tips

Round Push

Flat Push On

Flat Screw

Cone Screw

Attach one of these nonmarring tips to prevent a metal holding screw from damaging workpiece surfaces.

		Overall
	For Holding Screw Thread Size	Dia.	Lg.	Material		Each
Round Push On



		8-24, 8-32	13/32"	5/16"	Plastic	5147A11	00000


		1/4"-20, 1/4"-28, M6	7/16"	7/16"	Rubber	5147A89	0000
		3/8"-16, 3/8"-24, M10	23/32"	7/8"	Rubber	5147A96	0000


		Flat Push On



				1/4"-20, 1/4"-28	19/32"	13/32"	Plastic	5147A12	0000


				5/16"-18, 5/16"-24, M8	3/4"	1/2"	Rubber	5147A15	0000
				3/8"-16, 3/8"-24	7/8"	17/32"	Rubber	5147A13	0000


				Flat Screw On



						1/4"-20	13/16"	11/16"	Rubber	5147A34	0000


						5/16"-18	13/16"	11/16"	Rubber	5147A35	0000
						3/8"-16	13/16"	7/8"	Rubber	5147A36	0000


						Cone Screw On



								1/4"-20	13/16"	3/4"	Rubber	5147A37	0000


								5/16"-18	13/16"	3/4"	Rubber	5147A38	0000
								3/8"-16	13/16"	15/16"	Rubber	5147A39	0000

Threaded Locating and Support Buttons


	Flat Head

Domed Head

Use these buttons to support and position workpieces and fixtures from the bottom or side. Threading makes these buttons easier to replace than press-fit, so they are a good choice for high-wear applications. They’re also known as rest buttons.

Hardened Heat Treatment—Hardened steel buttons are stronger and resist wear better than steel buttons. They are precision ground, which helps them maintain their shape and size, even with repeated use. This makes them a good choice for use in modular fixtures where repeatability and exact positioning are important.

Domed Head—Buttons with a domed head support rounded or irregularly shaped workpieces with minimal contact.

Hex—Their hex shape lets you screw them into a threaded hole with a wrench or socket.

			Thread
	Lg.	Wd.	Size	Lg.	Lg. Tolerance	Shape	Specs. Met		Each
Steel with Flat Head



		3/16"	1/4"	8-32	3/16"	0" to 0.015"	Hex	—	8479A13	00000


		3/16"	5/16"	10-32	1/4"	0" to 0.015"	Hex	—	8479A14	0000
		3/16"	3/8"	1/4"-28	5/16"	0" to 0.015"	Hex	—	8479A15	0000
		1/4"	3/8"	1/4"-20	3/8"	-0.003" to 0.012"	Hex	—	8479A111	0000
		1/4"	3/8"	1/4"-28	5/16"	0" to 0.015"	Hex	—	8479A11	0000
		1/4"	1/2"	3/8"-16	1/2"	-0.003" to 0.012"	Hex	—	8479A116	0000
		1/4"	1/2"	3/8"-24	7/16"	0" to 0.015"	Hex	—	8479A37	0000
		1/4"	5/8"	1/2"-13	5/8"	-0.003" to 0.012"	Hex	—	8479A122	0000
		1/4"	3/4"	5/8"-11	3/4"	0" to 0.012"	Hex	—	8479A127	0000
		3/8"	3/8"	1/4"-20	3/8"	-0.003" to 0.012"	Hex	—	8479A112	0000
		3/8"	3/8"	1/4"-28	5/16"	0" to 0.015"	Hex	—	8479A12	0000


		3/8"	1/2"	3/8"-16	1/2"	-0.003" to 0.012"	Hex	—	8479A117	0000
		3/8"	1/2"	3/8"-24	7/16"	0" to 0.015"	Hex	—	8479A38	0000
		3/8"	5/8"	1/2"-13	5/8"	-0.003" to 0.012"	Hex	—	8479A123	0000
		3/8"	3/4"	5/8"-11	3/4"	0" to 0.012"	Hex	—	8479A128	0000
		1/2"	3/8"	1/4"-20	3/8"	-0.003" to 0.012"	Hex	—	8479A113	0000
		1/2"	1/2"	3/8"-16	1/2"	-0.003" to 0.012"	Hex	—	8479A118	0000
		1/2"	1/2"	3/8"-24	1/2"	0.005" to 0.015"	Hex	—	8479A4	0000
		1/2"	5/8"	1/2"-13	5/8"	-0.003" to 0.012"	Hex	—	8479A124	0000
		1/2"	5/8"	1/2"-20	1/2"	0.005" to 0.015"	Hex	—	8479A7	0000
		1/2"	3/4"	1/2"-20	9/16"	0" to 0.015"	Hex	—	8479A68	0000


		1/2"	3/4"	5/8"-11	3/4"	0" to 0.012"	Hex	—	8479A129	0000
		3/4"	3/8"	1/4"-20	3/8"	-0.003" to 0.012"	Hex	—	8479A114	0000
		3/4"	3/8"	1/4"-28	3/8"	0.005" to 0.015"	Hex	—	8479A2	0000
		3/4"	1/2"	3/8"-16	1/2"	-0.003" to 0.012"	Hex	—	8479A119	0000
		3/4"	1/2"	3/8"-24	1/2"	0.005" to 0.015"	Hex	—	8479A5	0000
		3/4"	5/8"	1/2"-13	5/8"	-0.003" to 0.012"	Hex	—	8479A125	0000
		3/4"	5/8"	1/2"-20	1/2"	0.005" to 0.015"	Hex	—	8479A8	0000
		3/4"	3/4"	5/8"-11	3/4"	0" to 0.012"	Hex	—	8479A131	0000
		1"	3/8"	1/4"-20	3/8"	-0.003" to 0.012"	Hex	—	8479A115	0000
		1"	3/8"	1/4"-28	3/8"	0.005" to 0.015"	Hex	—	8479A3	0000


		1"	1/2"	3/8"-16	1/2"	-0.003" to 0.012"	Hex	—	8479A121	0000
		1"	1/2"	3/8"-24	1/2"	0.005" to 0.015"	Hex	—	8479A6	0000
		1"	5/8"	1/2"-13	5/8"	-0.003" to 0.012"	Hex	—	8479A126	0000
		1"	5/8"	1/2"-20	1/2"	0.005" to 0.015"	Hex	—	8479A9	0000
		1"	3/4"	5/8"-11	3/4"	0" to 0.012"	Hex	—	8479A132	0000
		10 mm	10 mm	M6 × 1 mm	11 mm	-0.2 mm to 0.2 mm	Hex	DIN 6320	3078N11	0000
		15 mm	13 mm	M8 × 1.25 mm	13 mm	-0.2 mm to 0.2 mm	Hex	DIN 6320	3078N12	0000
		20 mm	17 mm	M10 × 1.5 mm	16 mm	-0.2 mm to 0.2 mm	Hex	DIN 6320	3078N13	0000
		25 mm	19 mm	M12 × 1.75 mm	20 mm	-0.2 mm to 0.2 mm	Hex	DIN 6320	3078N14	0000


		Hardened Steel with Flat Head



				10 mm	17 mm	M8 × 1.25 mm	10 mm	-0.01 mm to 0.01 mm	Hex	—	3078N15	00000


				10 mm	19 mm	M10 × 1.5 mm	12 mm	-0.01 mm to 0.01 mm	Hex	—	3078N16	00000
				10 mm	22 mm	M12 × 1.75 mm	14 mm	-0.01 mm to 0.01 mm	Hex	—	3078N17	00000


Hardened Steel with Domed Head



				10 mm	17 mm	M8 × 1.25 mm	10 mm	-0.1 mm to 0.1 mm	Hex	—	3078N18	00000


				10 mm	19 mm	M10 × 1.5 mm	12 mm	-0.1 mm to 0.1 mm	Hex	—	3078N19	00000
				10 mm	22 mm	M12 × 1.75 mm	14 mm	-0.1 mm to 0.1 mm	Hex	—	3078N21	00000

Swiveling Locating and Support Buttons

The swiveling tip supports uneven and angled surfaces on workpieces and fixtures. These buttons screw into a threaded hole. Also known as rest buttons.

		Head				Thread
	Tip Dia.	Lg.	Wd.	Tip-to-Head Lg.	Lg.	Size	Lg.	Range of Motion	Head Lg. Tolerance	Load Cap., lb.	Tip Material		Each
Steel



		1/4"	1/4"	3/8"	1/16"	5/16"	10-32	1/2"	28°	-0.002" to 0.002"	1,150	Stainless Steel	1417N11	000000


		5/16"	5/16"	7/16"	1/8"	7/16"	1/4"-20	1/2"	28°	-0.002" to 0.002"	2,400	Stainless Steel	1417N12	00000
		7/16"	3/8"	1/2"	1/8"	1/2"	5/16"-18	1/2"	28°	-0.002" to 0.002"	2,750	Stainless Steel	1417N13	00000
		9/16"	1/2"	5/8"	1/8"	5/8"	3/8"-16	1/2"	28°	-0.002" to 0.002"	3,400	Stainless Steel	1417N14	00000
		3/4"	5/8"	13/16"	1/8"	3/4"	1/2"-13	1"	32°	-0.002" to 0.002"	5,900	Stainless Steel	1417N15	00000
		13/16"	11/16"	15/16"	1/8"	13/16"	5/8"-11	1"	32°	-0.002" to 0.002"	9,900	Stainless Steel	1417N16	00000
		8 mm	8 mm	10 mm	2 mm	10 mm	M6 × 1 mm	12 mm	28°	-0.05 mm to 0.05 mm	2,050	Stainless Steel	1417N17	00000
		11 mm	11 mm	13 mm	3 mm	14 mm	M8 × 1.25 mm	12 mm	28°	-0.05 mm to 0.05 mm	3,450	Stainless Steel	1417N18	00000