Filter by
Holding Screw Thread Size
Holding Capacity
Thread Size
Overall Length
Holding Screw Tip Material
Handle Style
Plunger Shape
Length
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Toggle Clamp Holding Screws
 |  |
With Rubber Rigid Flat Tip | With Rubber Rigid Conical Tip |
 |  |
With Rubber Swiveling Flat Holding Screw Tip | With Steel Rigid Flat Tip |
 |  |
With Steel Swiveling Flat Tip | With Stainless Steel Rigid Flat Tip |
Holding Screw | Steel Clamp Holding Screws | Stainless Steel Clamp Holding Screws | |||||||
|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Tip Dia. | Overall Lg. | Each | Each | ||||
With Rubber Rigid Flat Tip | |||||||||
| 8-32 | 3/4" | 9/16" | 1" | 5147A56 | 00000 | 5147A88 | 00000 | ||
| 8-32 | 1" | 9/16" | 1 1/4" | 5147A57 | 0000 | ——— | 0 | ||
| 10-32 | 1" | 9/16" | 1 3/8" | 5147A61 | 0000 | 5147A16 | 0000 | ||
| 1/4"-20 | 5/8" | 11/16" | 1" | 5147A58 | 0000 | ——— | 0 | ||
| 1/4"-20 | 1 1/8" | 5/8" | 1 5/8" | 5147A62 | 0000 | 5147A17 | 0000 | ||
| 1/4"-20 | 1 1/8" | 11/16" | 1 1/2" | 5147A59 | 0000 | ——— | 0 | ||
| 1/4"-20 | 1 5/8" | 5/8" | 2 1/8" | 5147A63 | 0000 | 5147A18 | 0000 | ||
| 1/4"-20 | 1 3/4" | 19/32" | 1 29/32" | ——— | 0 | 5147A98 | 0000 | ||
| 5/16"-18 | 1 5/8" | 13/16" | 2 1/4" | 5147A64 | 0000 | 5147A19 | 0000 | ||
| 5/16"-18 | 2 3/8" | 13/16" | 3" | 5147A65 | 0000 | 5147A84 | 0000 | ||
| 3/8"-16 | 2 3/8" | 1" | 3 1/4" | 5147A66 | 0000 | 5147A85 | 00000 | ||
| 3/8"-16 | 2 1/2" | 7/8" | 3 1/2" | 5147A67 | 0000 | ——— | 0 | ||
| 3/8"-16 | 4 7/8" | 1" | 5 3/4" | 5147A68 | 0000 | ——— | 0 | ||
| 1/2"-13 | 2 3/4" | 1 3/16" | 3 7/8" | 5147A69 | 0000 | ——— | 0 | ||
| 5/8"-11 | 3 5/8" | 1 3/8" | 5" | 5147A71 | 00000 | ——— | 0 | ||
| M4 | 13/16" | 5/16" | 7/8" | 5147A76 | 0000 | ——— | 0 | ||
| M4 | 1 3/16" | 5/16" | 1 1/4" | 5147A21 | 0000 | ——— | 0 | ||
| M5 | 1" | 3/8" | 1 1/8" | 5147A78 | 0000 | ——— | 0 | ||
| M5 | 1 3/8" | 3/8" | 1 9/16" | 5147A79 | 0000 | ——— | 0 | ||
| M6 | 5/8" | 11/16" | 1" | 5147A94 | 0000 | ——— | 0 | ||
| M6 | 1 3/16" | 5/8" | 1 3/4" | 5147A23 | 0000 | ——— | 0 | ||
| M6 | 1 5/8" | 5/8" | 2 1/8" | 5147A24 | 0000 | ——— | 0 | ||
| M8 | 1 3/8" | 13/16" | 2 1/8" | 5147A25 | 0000 | ——— | 0 | ||
| M8 | 1 3/4" | 7/8" | 2 1/2" | 5147A75 | 0000 | ——— | 0 | ||
| M8 | 2 5/8" | 13/16" | 3 3/8" | 5147A26 | 0000 | ——— | 0 | ||
| M10 | 2 3/16" | 1" | 3 1/8" | 5147A92 | 0000 | ——— | 0 | ||
| M10 | 3 3/4" | 1" | 4 3/4" | 5147A91 | 0000 | ——— | 0 | ||
| M12 | 2 7/8" | 1 3/16" | 4 1/8" | 5147A93 | 0000 | ——— | 0 | ||
With Rubber Rigid Conical Tip | |||||||||
| 10-32 | 1" | 9/16" | 1 1/2" | 5147A81 | 0000 | ——— | 0 | ||
| 1/4"-20 | 1 5/8" | 3/4" | 2 1/4" | 5147A82 | 0000 | ——— | 0 | ||
| 5/16"-18 | 2 3/8" | 3/4" | 3" | 5147A83 | 0000 | ——— | 0 | ||
| 5/16"-18 | 4 3/4" | 3/4" | 5 1/2" | 5147A95 | 0000 | ——— | 0 | ||
| 3/8"-16 | 2 1/2" | 7/8" | 3 1/2" | 5147A77 | 0000 | ——— | 0 | ||
With Rubber Swiveling Flat Holding Screw Tip | |||||||||
| 1/4"-20 | 1 5/8" | 1" | 2 5/8" | 5147A72 | 00000 | ——— | 0 | ||
| 5/16"-18 | 2" | 1 1/2" | 3" | 5147A73 | 00000 | ——— | 0 | ||
| 3/8"-16 | 2 1/2" | 2" | 3 5/8" | 5147A74 | 00000 | ——— | 0 | ||
With Steel Rigid Flat Tip | |||||||||
| 8-32 | 1" | 1/4" | 1 3/32" | 5147A97 | 0000 | ——— | 0 | ||
| 5/16"-18 | 1 3/4" | 1/2" | 2" | 5147A101 | 0000 | ——— | 0 | ||
With Steel Swiveling Flat Tip | |||||||||
| 1/4"-20 | 1 5/8" | 1/2" | 2 1/2" | 5147A28 | 0000 | ——— | 0 | ||
| 5/16"-18 | 2" | 9/16" | 2 3/4" | 5147A29 | 0000 | ——— | 0 | ||
| 3/8"-16 | 2" | 5/8" | 3 1/8" | 5147A31 | 0000 | ——— | 0 | ||
| 3/8"-16 | 2 1/2" | 5/8" | 3 3/8" | 5147A32 | 0000 | ——— | 0 | ||
| 1/2"-13 | 3 1/2" | 1" | 4 5/8" | 5147A33 | 00000 | ——— | 0 | ||
With Stainless Steel Rigid Flat Tip | |||||||||
| 10-32 | 1" | 5/16" | 1 1/8" | ——— | 0 | 5147A99 | 0000 | ||
| M4 | 13/16" | 5/16" | 29/32" | ——— | 0 | 5147A102 | 0000 | ||
Reverse-Action Push Toggle Clamps
 |
Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg. | Overall Ht. | Overall Lg. | Grip Style | Each | |||
Push Only—Steel | |||||||||||||||
| 300 | 1 3/4" | 1" | 1" | Round | 7/16" | Internal | 5/16"-18 | 1" | 2 3/8" | 8 5/8" | Cushion | 5093A62 | 000000 | ||
| 600 | 1 3/4" | 1 11/16" | 1 1/8" | Round | 5/8" | Internal | 3/8"-16 | 1" | 2 1/4" | 11 5/8" | Cushion | 5093A74 | 00000 | ||
| 600 | 1 3/4" | 1 11/16" | 1 1/8" | Round | 5/8" | Internal | M10 | 25 mm | 2 1/4" | 11 5/8" | Cushion | 5093A36 | 000000 | ||
Push/Pull Toggle Clamps
 |
Push Only—Steel Internal Plunger Thread Cushion Grip |
Hold workpieces from the side.
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg., mm | Overall Ht. | Overall Lg. | Grip Style | Each | |||
Push Only—Steel | |||||||||||||||
| 2,500 | 2" | 13/16" | 2" | Round | 5/8" | Internal | M10 | 32 | 3 1/16" | 7 1/16" | Cushion | 5093A17 | 000000 | ||
Push Toggle Clamps with Locking Handle
 |
Push the lever to lock the handle and prevent accidental opening. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg. | Overall Ht. | Overall Lg. | Grip Style | Each | |||
Push Only—Steel | |||||||||||||||
| 600 | 1 1/4" | 1" | 1 1/4" | Round | 7/16" | Internal | 5/16"-18 | 1" | 3 1/2" | 4 3/4" | Cushion | 6124A21 | 000000 | ||
| 600 | 1 1/4" | 1" | 1 1/4" | Round | 7/16" | Internal | M8 | 25 mm | 3 7/16" | 4 3/4" | Cushion | 6124A15 | 00000 | ||
| 2,500 | 2" | 13/16" | 2" | Round | 5/8" | Internal | 3/8"-16 | 1 1/4" | 3 1/16" | 7 1/16" | Cushion | 5093A77 | 000000 | ||
| 2,500 | 2" | 13/16" | 2" | Round | 5/8" | Internal | M10 | 31 mm | 3 1/16" | 7 1/16" | Cushion | 6124A12 | 000000 | ||
| 7,500 | 4 1/8" | 1 1/4" | 4" | Round | 7/8" | Internal | 1/2"-13 | 2" | 4 1/4" | 13 9/16" | Cushion | 6124A13 | 000000 | ||
| 7,500 | 4 1/8" | 1 1/4" | 4" | Round | 7/8" | Internal | M12 | 50 mm | 4 1/4" | 13 9/16" | Cushion | 6124A14 | 000000 | ||
Heavy Duty Reverse-Action Push Toggle Clamps
 |
A highly durable construction with hardened steel pivot pins and bushings provides a long service life. Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg. | Overall Ht. | Overall Lg. | Grip Style | Each | |||
Push Only—Steel | |||||||||||||||
| 2,500 | 1 1/8" | 1 1/8" | 1" | Round | 1/2" | Internal | 5/16"-18 | 1" | 2 1/2" | 7 5/8" | Cushion | 5222N1 | 000000 | ||
| 2,500 | 1 1/8" | 1 1/8" | 1" | Round | 1/2" | Internal | M8 | 25 mm | 2 1/2" | 7 5/8" | Cushion | 5222N2 | 00000 | ||
| 4,600 | 3 1/4" | 1 3/8" | 3 1/8" | Round | 3/4" | Internal | 1/2"-13 | 2" | 3 13/16" | 13 1/16" | Cushion | 5222N3 | 00000 | ||
| 4,600 | 3 1/4" | 1 3/8" | 3 1/8" | Round | 3/4" | Internal | M12 | 50 mm | 3 13/16" | 13 1/16" | Cushion | 5222N4 | 000000 | ||
| 5,800 | 1 15/16" | 1 3/8" | 1 3/4" | Round | 3/4" | Internal | 1/2"-13 | 2" | 3 5/8" | 11 1/8" | Cushion | 5222N5 | 00000 | ||
| 5,800 | 1 15/16" | 1 3/8" | 1 3/4" | Round | 3/4" | Internal | M12 | 50 mm | 3 5/8" | 11 1/8" | Cushion | 5222N6 | 00000 | ||
Auto-Adjusting Push Toggle Clamps
 |  |
Clamps hold workpieces of different thicknesses without manual adjustment. |
Hold workpieces of different thicknesses with one clamp. These clamps automatically adjust to compensate for variations in size. They secure when the plunger is fully extended to hold your workpiece from the side. The holding screw has a nonmarring tip.
Plunger | When Clamped | Holding Screws | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | For Max. Workpiece Variation | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg., mm | Overall Ht. | Overall Lg. | Grip Style | No. of | Tip Material | Thread Size | Each | |||
Push Only—Steel | |||||||||||||||||||
| 450 | 3/8" | 1 1/2" | 7/8" | 11/16" | Round | 5/16" | Internal | M6 | 25 | 1 7/16" | 7" | Cushion | 1 | Plastic | M5 | 5127A22 | 000000 | ||
| 700 | 5/8" | 3" | 1" | 1" | Round | 15/32" | Internal | M8 | 19 | 1 13/16" | 9 3/16" | Cushion | 1 | Plastic | M6 | 5127A13 | 00000 | ||
Compact Push Toggle Clamps with Locking Handle
 |
Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications. Push the lever to lock the handle and prevent accidental opening. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Toggle Clamp Holding Screw Tips
 |
Round Push On |
 |
Flat Push On |
 |
Flat Screw On |
 |
Cone Screw On |
Overall | |||||||
|---|---|---|---|---|---|---|---|
For Holding Screw Thread Size | Dia. | Lg. | Material | Each | |||
Round Push On | |||||||
| 8-24, 8-32 | 13/32" | 5/16" | Plastic | 5147A11 | 00000 | ||
| 1/4"-20, 1/4"-28, M6 | 7/16" | 7/16" | Rubber | 5147A89 | 0000 | ||
| 3/8"-16, 3/8"-24, M10 | 23/32" | 7/8" | Rubber | 5147A96 | 0000 | ||
Flat Push On | |||||||
| 1/4"-20, 1/4"-28 | 19/32" | 13/32" | Plastic | 5147A12 | 0000 | ||
| 5/16"-18, 5/16"-24, M8 | 3/4" | 1/2" | Rubber | 5147A15 | 0000 | ||
| 3/8"-16, 3/8"-24 | 7/8" | 17/32" | Rubber | 5147A13 | 0000 | ||
Flat Screw On | |||||||
| 1/4"-20 | 13/16" | 11/16" | Rubber | 5147A34 | 0000 | ||
| 5/16"-18 | 13/16" | 11/16" | Rubber | 5147A35 | 0000 | ||
| 3/8"-16 | 13/16" | 7/8" | Rubber | 5147A36 | 0000 | ||
Cone Screw On | |||||||
| 1/4"-20 | 13/16" | 3/4" | Rubber | 5147A37 | 0000 | ||
| 5/16"-18 | 13/16" | 3/4" | Rubber | 5147A38 | 0000 | ||
| 3/8"-16 | 13/16" | 15/16" | Rubber | 5147A39 | 0000 | ||
Hole-Mount Push/Pull Toggle Clamps with Locking Handle
 |
Push the lever to lock the handle and prevent accidental opening. Panel mount these clamps through a hole with the included nut, or drill and tap a hole to flush mount. They have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
Push-Only Clamp—Push-only clamps secure when the plunger is fully extended.
Plunger | When Clamped | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg. | Overall Ht. | Overall Lg. | Grip Style | Includes | Each | |||
Push Only—Steel | |||||||||||||||
| 750 | 2 3/4" | 2 5/8" | Round | 5/8" | Internal | 3/8"-16 | 1 1/4" | 4 7/8" | 7 1/8" | Cushion | Mounting Nut | 6124A27 | 000000 | ||
Push Toggle Clamps with Rotating Handle
 |  |
Handle Rotated |
The handle can be rotated 125° for easier access or extra clearance above the clamp. These clamps secure when the plunger is fully extended to hold a workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Air-Powered Push Toggle Clamps
 |
Use for repetitive clamping and in production environments. These clamps secure when the plunger is fully extended to hold a workpiece from the side. Air from one inlet port engages the clamp, and air from the other inlet port disengages it. Clamps maintain the full-rated holding capacity even with a loss of air pressure. They have a threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included). Fittings (not included) are required to connect the clamp's ports to a control valve and an air line.
Plunger | When Clamped | Air Inlet and Outlet | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Holding Cap., lb. | Lg. | Ht. | Travel | Shape | Dia. | Thread Location | Thread Size | Thread Lg. | Overall Ht. | Overall Lg. | Max. Air Inlet Pressure, psi | Pipe Size | Thread Type | Gender | Temp. Range, ° F | Each | |||
Push Only—Steel | |||||||||||||||||||
| 600 | 1 1/4" | 1 1/8" | 3/4" | Round | 7/16" | Internal | 5/16"-18 | 1" | 3" | 9 7/8" | 60 | 1/8 | NPT | Female | -10 to 165 | 5137A51 | 0000000 | ||
| 2,500 | 2" | 1 1/8" | 1 1/4" | Round | 5/8" | Internal | 3/8"-16 | 1 1/4" | 3 5/8" | 13 1/2" | 145 | 1/8 | NPT | Female | -10 to 165 | 5137A52 | 000000 | ||
| 16,000 | 3 3/8" | 2 5/8" | 2" | Round | 1" | Internal | 5/8"-11 | 2" | 7 1/4" | 20 5/8" | 145 | 1/4 | NPT | Female | -10 to 165 | 5137A53 | 000000 | ||
