McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    19 Products

    Fold-Up Steps

    Image of Product. Front orientation. Contains Annotated. Steps. Fold-Up Steps, Style 1.
    Image of Product. Front orientation. Contains Annotated. Steps. Fold-Up Steps, Style 2.

    Style 1

    Style 2

    Image of Product. Front orientation. Contains Annotated. Steps. Fold-Up Steps, Style 3.
    Image of Product. Front orientation. Contains Annotated. Steps. Fold-Up Steps, Style 4.

    Style 3

    Style 4

    Flip these steps down when you need them and fold them up when you don’t. They can be bolted onto a stable surface, such as a wall. All steps have a diamond-plate or serrated tread for maximum slip resistance.
    Note: Check local, state, and federal codes, including OSHA, for safe operating practices.
    Style 1
    Image of Product. Front orientation. Contains Annotated. Steps. Fold-Up Steps, Style 1.
    Style 1 have a cutout and rounded edges that you can grab with your hand if needed.
    Zinc-Plated Steel—Zinc-plated steel steps have a protective layer that prevents rust.
    304 Stainless Steel—304 stainless steel steps are corrosion resistant and have good chemical resistance.
    316 Stainless Steel—316 stainless steel steps offer the highest corrosion resistance and the best protection against chemicals and salt water.
    Overall
    Step
    Mounting Holes
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Tread
    Projection
    Wt.,
    lb.
    Wt. Cap.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    Ht.
    Assembly
    Each
    Zinc-Plated Steel
    4 3/4"1 3/4"3 3/4"4 3/8"2 1/8"Diamond Tread3 3/4"2Not RatedNo25/16"3 7/8"Assembled8035T14000000
    5"3 1/2"6 5/8"6 1/2"5 1/4"Diamond Tread6 5/8"4Not RatedNo25/16"3 7/8"Assembled8035T1200000
     
    304 Stainless Steel
    4 3/4"1 3/4"3 3/4"4 3/8"2 1/8"Diamond Tread3 3/4"2Not RatedNo25/16"3 7/8"Assembled8035T1300000
     
    316 Stainless Steel
    4 3/8"1 7/8"3 1/2"3 3/8"2"Diamond Tread3 1/2"1Not RatedNo25/16"3 5/8"Assembled7963T3400000
     
    Style 2
    Image of Product. Front orientation. Contains Annotated. Steps. Fold-Up Steps, Style 2.
    Style 2 are large enough to support your whole foot.
    Chrome-Plated Steel—Chrome-plated steel steps have a protective layer that prevents rust.
    Overall
    Step
    Mounting Holes
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Tread
    Projection
    Wt.,
    lb.
    Wt. Cap.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    Ht.
    Ctr.-to-Ctr.
    Wd.
    Assembly
    Each
    Chrome-Plated Steel
    4 7/8"4"8 1/2"6 3/4"6 3/8"Diamond Tread8 1/2"5Not RatedNo45/16"4"2 1/4"Assembled8035T11000000
     
    Style 3
    Image of Product. Front orientation. Contains Annotated. Steps. Fold-Up Steps, Style 3.
    304 Stainless Steel—304 stainless steel steps are corrosion resistant and have good chemical resistance.
    Overall
    Step
    Mounting Holes
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Tread
    Projection
    Wt.,
    lb.
    Wt. Cap.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    Ht.
    Ctr.-to-Ctr.
    Wd.
    Assembly
    Each
    304 Stainless Steel
    3 3/8"2 3/8"5 5/8"1"4 1/4"Serrated5 5/8"1Not RatedNo43/16"2 5/8"1 3/4"Assembled7963T36000000
     
    Style 4
    Image of Product. Front orientation. Contains Annotated. Steps. Fold-Up Steps, Style 4.
    Style 4 are large enough to hold both of your feet.
    Yellow—Yellow steps are highly visible and reduce tripping and safety hazards when left unfolded.
    Powder-Coated Steel—Powder-coated steel steps have a protective layer that prevents rust.
    Spring-Loaded Hinge—Steps with a spring-loaded hinge automatically fold up when you step off.
    Overall
    Step
    Mounting Holes
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Tread
    Projection
    Wt.,
    lb.
    Wt. Cap.,
    lb.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    Wd.
    Assembly
    Each
    Gray Powder-Coated Steel
    4"15"10 3/4"14 1/4"9 1/2"Serrated10 3/4"11350No29/16"13"Assembled8035T52000000
     
    Gray Powder-Coated Steel with Spring-Loaded Hinge
    4"15"10 3/4"14 1/4"9 1/2"Serrated10 3/4"11350No29/16"13"Assembled8035T16000000
     
    Yellow Powder-Coated Steel
    4"15"10 3/4"14 1/4"9 1/2"Serrated10 3/4"11350No29/16"13"Assembled8035T1500000
     

    Under-Mount Steps

    Image of Product. Front orientation. Contains Annotated. Steps. Under-Mount Steps.
    Get a leg up. Weld or bolt these steps—originally designed to hang underneath trucks—to any flat horizontal surface. They’re wide and deep enough to support both feet at once to give you a stable base. They’re also serrated, so you won’t slip. And unlike fold-away options, they’re always ready to step on. Made of galvanized steel, you can use them outdoors and in harsh conditions. Rubber sides absorb impact without breaking.
    Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Overall
    Step
    Mounting
    Holes
    Ht.
    Wd.
    Dp.
    No. of
    Steps
    Wd.
    Dp.
    Tread
    Material
    Wt. Cap.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Each
    Black Rubber
    11"13 1/2"4 3/4"112"4 3/4"SerratedGalvanized SteelNot RatedYes23/8"Unassembled9868N1110000000
    11"31 1/2"4 3/4"130"4 3/4"SerratedGalvanized SteelNot RatedYes23/8"Unassembled9868N112000000
     

    Tire Steps

    Image of ProductInUse. 3 Steps. Front orientation. Steps. Tire Steps, For Semi Truck Tires, Perforated Step, 3 Steps.
    Image of ProductInUse. 1 Step. Front orientation. Steps. Tire Steps, Serrated Step, 1 Step.

    3 Steps

    1 Step

    Image of Product. 3 Steps. Front orientation. Steps. Tire Steps, For Semi Truck Tires, Perforated Step, 3 Steps.
    Image of Product. 1 Step. Front orientation. Steps. Tire Steps, Serrated Step, 1 Step.

    3 Steps

    1 Step

    Safely climb truck tires for inspections and maintenance under the hood or to access cargo. They are compatible with a variety of vehicles, from standard work trucks to semi-trucks. All steps are either serrated or perforated to prevent slipping. Fold them for easy transport and storage.
    Note: Check local, state, and federal codes, including OSHA, for safe operating practices.
    3 Steps—Choose a three-step tire step for optimal reach to components under the hood. The third step rests on top of the tire.
    For
    Wheel
    Overall
    Top
    Step
    Middle
    Step
    Bottom
    Step
    No. of
    Steps
    For Tire Wd.
    Dia.
    Wd.
    Wt. Cap.,
    lb.
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    Assembly
    Material
    Color
    Each
    For Truck Tires
     
    Serrated Step
    1225, 255, 285, 315, 34514" to 20"9" to 13 1/2"30014 1/2"22"20" to 26"10" to 21"21 1/2"7"—————UnassembledPainted SteelGray6868N1130000000
     
    For Semi Truck Tires
     
    Perforated Step
    3255, 265, 275, 285, 29522 1/2" to 24 1/2"10" to 11 1/2"40024"14 1/2"28"—13"10"13"6"18"13 1/2"6"AssembledPainted SteelYellow6868N11000000
     

    Truck-Mount Ladders

    Image of Product. Front orientation. Contains Annotated. Ladders. Truck-Mount Ladders, Style 1.
    Image of Product. Front orientation. Contains Annotated. Ladders. Truck-Mount Ladders, Style 2.
    Image of Product. Front orientation. Contains Annotated. Ladders. Truck-Mount Ladders, Style 3.

    Style 1

    Style 2

    Style 3

    Safely climb on and off flatbed trailers. Choose a ladder tall enough to reach your flatbed—standard platforms are about 50" from the ground; drop decks are about 36". Quick to install and remove, these ladders hook onto the rub rail of most flatbeds. They’re made of aluminum, so they’re lightweight and corrosion resistant.
    Note: Ladders that have OSHA or Cal/OSHA specifications listed meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Style 1
    Image of ProductInUse. Front orientation. Ladders. Truck-Mount Ladders, Style 1.
    Image of ProductInUse. Shown Folded While Installed. Front orientation. Ladders. Truck-Mount Ladders, Style 1.
    Image of Product. Front orientation. Contains Annotated. Ladders. Truck-Mount Ladders, Style 1.

    Shown Folded While Installed

    Style 1 must be in contact with the ground during use. These ladders have ribbed steps for good slip resistance. Keep them installed while driving—just swing them upright and secure them with the included brackets.
    Overall
    Step
    For Platform
    Ht.
    Max. Climbing
    Ht.
    Ht.
    (A)
    Wd.
    (B)
    Dp. (C)
    No. of
    Steps
    Shape
    Tread
    Grab Post
    Ht.
    Assembly
    Foldable
    Specs. Met
    Each
    Aluminum
     
    375 lb. Capacity
    28" to 42"43"80"19"25" to 40"4FlatRibbed38"AssembledYesOSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1926.451
    		4200N1230000000
    48" to 52"52"90"19"25" to 32"5FlatRibbed38"AssembledYesOSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1926.451
    		4200N124000000
    54" to 66"55"104"19"21" to 45"6FlatRibbed38"AssembledYesOSHA Compliant 29 CFR 1910 Subpart D, OSHA Compliant 29 CFR 1926.451
    		4200N125000000
     
    Style 2
    Image of ProductInUse. Front orientation. Ladders. Truck-Mount Ladders, Style 2.
    Image of Product. Front orientation. Contains Annotated. Ladders. Truck-Mount Ladders, Style 2.
    Styles 2 and 3 don’t need to touch the ground to support your climbing. This is useful when working on uneven surfaces. They should be removed and stored before driving. The steps are either perforated or serrated—they have openings so liquids can drain and debris can fall through. All steps provide good traction, but serrated steps are more slip resistant than perforated steps.
    Overall
    Step
    For Platform
    Ht.
    Max. Climbing
    Ht.
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    No. of
    Steps
    Shape
    Tread
    Assembly
    Foldable
    Specs. Met
    Each
    Aluminum
     
    375 lb. Capacity
    54"30"43"18"6"4RoundPerforatedAssembledNoANSI-ASC A14.24200N1210000000
     
    Style 3
    Image of ProductInUse. Front orientation. Ladders. Truck-Mount Ladders, Style 3.
    Image of Product. Front orientation. Contains Annotated. Ladders. Truck-Mount Ladders, Style 3.
    Styles 2 and 3 don’t need to touch the ground to support your climbing. This is useful when working on uneven surfaces. They should be removed and stored before driving. The steps are either perforated or serrated—they have openings so liquids can drain and debris can fall through. All steps provide good traction, but serrated steps are more slip resistant than perforated steps. Style 3 store in small spaces because the legs fold up and the grab posts fold down.
    Cannot Be Sold To—Ladders that cannot be sold to the listed areas are restricted due to product regulations.
    Overall
    Step
    For Platform
    Ht.
    Max. Climbing
    Ht.
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    No. of
    Steps
    Shape
    Tread
    Grab Post
    Ht.
    Assembly
    Foldable
    Specs. Met
    Cannot Be Sold To
    Each
    Aluminum
     
    375 lb. Capacity
    44"32"64"21"12"2FlatSerrated24"AssembledYesANSI-ASC A14.2, ANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053—4200N1220000000
    54"58"71"21"19"3FlatSerrated27"AssembledYesANSI-ASC A14.2, ANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053Outside United States, Canada, and Mexico4200N11000000
     
    back to top