Finish Finish |
|---|
|
Clamp Type Clamp Type |
|---|
 | Fixture |
Clamping Action Clamping Action |
|---|
 | Hold Down |
Component Component |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Holding Capacity Holding Capacity |
|---|
|
Ball-Lock Quick-Change Fixture Clamps
Build these components into fixture plates, machine subplates, and tombstones for quick changes. The system clamps and locates at the same time for accurate positioning with repeatability of ±0.0005". Components are compatible with Jergens Ball-Lock, Carr-Lane Carr Lock, and Kurt PinLock quick change systems.
For accurate positioning, at least two sets of clamps, liners, and receivers are required. Install the receivers in the base plate and the liners in the fixture plate. Then line up the two plates, insert the clamps, and tighten their screws to secure the fixture in place. If more holding capacity is needed, use additional clamps and receivers but omit liners to prevent the clamp from getting stuck in the fixture plate.
Push receiver plugs into unused receivers to prevent chips and coolant from accumulating during machining. When installed, plugs sit flush with the surface of the fixture plate. To remove, thread a screw into the tapped hole in the center and pull up.
For technical drawings and 3-D models, click on a part number.
Shank | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Fixture Plate Thick. | Dia., mm | Lg. | Dia. | Thick. | Hex Key Size | For Fixture Plate Thick. Tolerance | Holding Capacity, lbs. | Material | Includes | Each | |
| 1/2" | 13 | 1.08" | 7/8" | 1/4" | 3/32" | -0.005" to 0.005" | 625 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 0000000 |
| 1/2" | 16 | 1.15" | 1 1/2" | 5/16" | 1/8" | -0.005" to 0.005" | 800 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 3/4" | 13 | 1.33" | 7/8" | 1/4" | 3/32" | -0.005" to 0.005" | 625 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 3/4" | 16 | 1.40" | 1 1/2" | 5/16" | 1/8" | -0.005" to 0.005" | 800 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 3/4" | 20 | 1.53" | 1 3/4" | 3/8" | 1/8" | -0.005" to 0.005" | 2,250 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 3/4" | 25 | 1.70" | 2" | 3/8" | 5/32" | -0.005" to 0.005" | 5,440 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 1" | 20 | 1.78" | 1 3/4" | 3/8" | 1/8" | -0.005" to 0.005" | 2,250 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 1" | 25 | 1.95" | 2" | 3/8" | 5/32" | -0.005" to 0.005" | 5,400 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 1" | 30 | 2.13" | 2 1/4" | 1/2" | 3/16" | -0.005" to 0.005" | 8,000 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 1" | 35 | 2.22" | 2 1/4" | 1/2" | 1/4" | -0.005" to 0.005" | 11,780 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 1" | 50 | 2.70" | 3" | 3/4" | 3/8" | -0.005" to 0.005" | 15,200 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 1 1/2" | 35 | 2.72" | 2 1/4" | 1/2" | 1/4" | -0.005" to 0.005" | 11,780 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 1 1/2" | 50 | 3.20" | 3" | 3/4" | 3/8" | -0.005" to 0.005" | 15,200 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 2" | 35 | 3.22" | 2 1/4" | 1/2" | 1/4" | -0.005" to 0.005" | 11,780 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| 2" | 50 | 3.70" | 3" | 3/4" | 3/8" | -0.005" to 0.005" | 15,200 | Black-Oxide Steel | Hex Key, Set Screw | 0000000 | 000000 |
| For Fixture Plate Thick. | For Clamp Shank Dia., mm | OD | OD Tolerance Range | For Fixture Plate Thick. Tolerance | Material | Each | |
| 1/2" | 13 | 0.7518" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 000000 |
| 1/2" | 16 | 1.0018" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 3/4" | 13 | 0.7518" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 3/4" | 16 | 1.0018" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 3/4" | 20 | 1.3772" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 3/4" | 25 | 1.3772" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 1" | 20 | 1.3772" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 1" | 25 | 1.3772" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 1" | 30 | 1.7523" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 1" | 35 | 1.7523" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 1" | 50 | 2.5025" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 1 1/2" | 35 | 1.7523" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 1 1/2" | 50 | 2.5025" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 2" | 35 | 1.7523" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| 2" | 50 | 2.5025" | -0.0004" to 0" | -0.005" to 0.005" | Black-Oxide Steel | 0000000 | 00000 |
| For Min. Base Plate Thick. | For Clamp Shank Dia., mm | OD | Bolt Circle Dia. | OD Tolerance Range | Material | Number of Mounting Holes | Mounting Fasteners Included | Each | |
| 3/4" | 13 | 1.3750" | 0.984" | -0.0004" to 0" | Black-Oxide Steel | 3 | Yes | 0000000 | 000000 |
| 3/4" | 16 | 1.4370" | 1.125" | -0.0004" to 0" | Black-Oxide Steel | 3 | Yes | 0000000 | 00000 |
| 1" | 20 | 1.6873" | 1.362" | -0.0004" to 0" | Black-Oxide Steel | 3 | Yes | 0000000 | 00000 |
| 1 1/4" | 25 | 2.0623" | 1.644" | -0.0004" to 0" | Black-Oxide Steel | 3 | Yes | 0000000 | 00000 |
| 1 3/8" | 30 | 2.2654" | 1.876" | -0.0004" to 0" | Black-Oxide Steel | 3 | Yes | 0000000 | 00000 |
| 1 1/2" | 35 | 2.6873" | 2.178" | -0.0004" to 0" | Black-Oxide Steel | 3 | Yes | 0000000 | 00000 |
| 2" | 50 | 3.4998" | 2.916" | -0.0004" to 0" | Black-Oxide Steel | 3 | Yes | 0000000 | 000000 |