Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.

Hollow construction makes these seals more compressible than solid rubber seals. Made of EPDM rubber, they also resist salts.

Made of vinyl rubber, these seals also resist salts and detergents. Hollow construction provides compressibility.

The hollow construction on these seals provides better compressibility than solid rubber seals. Made of silicone rubber, they also resist water and salts.

It’s the hollow construction that makes these seals more compressible than solid seals. Made of silicone foam rubber, they also resist water and salts.

More compressible than seals with a solid bulb, these seals have a hollow bulb.

In addition to oil, these seals resist grease, salts, water, steam, and most detergents.

These seals have an EPDM foam rubber bulb.

The EPDM rubber wiper is firmer and more durable than the EPDM foam rubber wipers.

Made of silicone rubber, these seals can handle temperatures up to 500° F, plus they resist water and salts.

Use these H-seals to lock out moisture, dust, and debris around windows and panels.

Firmer and more durable than EPDM foam rubber seals, these seals are made of EPDM rubber. They also resist salts.

The foam core makes these vinyl rubber seals firmer and more durable than hollow seals. They also resist salts and detergents.

These seals have solid construction.

These seals have solid construction.

A tighter braid makes these fiberglass seals more durable than High-Temperature Ultra-Conformable Rope Edge Seals.

The flat edges on these square-profile seals provide more sealing surface than round-profile seals. They’re made of 98% silica to resist temperatures up to 2300° F.

Alumina silicate is loosely woven to create these ceramic seals that are stronger and more flexible than Ultra High- and Low-Temperature Rope Seals. They can handle temperatures from –300° to 2300° F.

A silicone-coated fiberglass cover sheds sparks and molten metal splash. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 450° F.

The PTFE coating on these fiberglass seals is slippery, so they are easier than the other seals to press fit into oven, furnace, and boiler doors. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 500° F.

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Silicone maintains its flexibility across a wide range of temperatures.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

Even after extended compression, these sheets and strips will bounce back to shape.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Flexible pile construction helps reduce door vibration.

Mount this weatherstripping to the sides and top of a door frame to seal gaps.

A dense seal helps control noise.

Also known as door sweeps, this weatherstripping closes the gap between the bottom of the door and the floor.

Avoid scuffing your floor and reduce wear on your seals—this weatherstripping has a plunger that lowers the seal as the door is closed and raises it as the door is opened.

Wrap this weatherstripping around the bottom of a door to seal gaps.

Sets include six pieces of weatherstripping for an overhead door—two for the top and four for the sides to seal gaps.

Close the gap between the bottom of an overhead door and the floor.

The threshold height can be adjusted to ensure a tight fit under a door.

With a ribbed top, these thresholds offer more slip resistance than smooth-top thresholds.

In addition to making a transition between flooring surfaces, thresholds are often used to reduce the gap between a door and the floor.

To provide more protection from the elements than dock door seals, these shelters wrap around trailers.

Create a frosted effect on windows to block the view.

Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

Sample multiple sizes and styles of rubber trim.

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

This trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of electronics equipment and circuit boards from impact.

Sample multiple sizes and styles of heavy duty plastic trim.

This trim withstands temperatures up to 500° F, which is generally twice as high as our other slippery trim. With a slippery surface, it minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.

This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications.

With a surface resistivity of 10 ⁵ ohms this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of plastic, it's also chemical resistant. Use it to protect the edges of of electronics equipment and circuit boards from impact.

Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, this foam trim protects edges on posts, shelving, and other surfaces from damage.

Made of aluminum or stainless steel, this trim withstands heavy impact for maximum surface protection. It's often used on panels, boards, signs, and mirrors to protect the edges.

Cushioning on the top provides added protection from impact. This nylon-coated stainless steel trim combines strength with flexibility for a snug hold. It can also protect wire, cable, and hose.

The raised bulb adds cushioning to absorb more impact than other surface guards to protect walls and other flat surfaces from impact.

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect walls and other flat surfaces from impact.

These metal guards provide more impact protection than plastic guards. Commonly used in warehouse and manufacturing areas, they protect corners on walls and other surfaces from impact.

Even in the dark, these black and yellow striped guards draw attention to equipment and obstructions. They protect corners on walls, posts, shelving, and other surfaces from damage.

The guards in this system have a metal core for added strength and stability. Combine corner guards and surface guards to create a system that protects walls and equipment from impact and wear. Often used in warehouse and manufacturing areas, these systems protect against damage from carts and vehicles.

Easily attach, move, and replace these magnetic wear strips on metal surfaces to minimize friction—simply press them on and peel them off as needed. Often found on conveyor systems and chutes, use these strips where friction between two parts or materials is wearing down equipment to extend equipment life.

Suitable for food contact, these plates are made of FDA listed UHMW plastic, which has a slippery surface to minimize friction. Often found on conveyor systems, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life.

With its reflective, mirror-like finish, this film is often used to repair or create new decorative finishes on edge trim, panels, and other flat surfaces.

Use this film on metal and plastic parts, appliances, and electronic equipment for protection against damage during packaging, shipping, and installation.

Often used to protect sheet metal during fiber and CO2 laser cutting, this film is also good for other fabrication processes such as bending, stamping, and forming. You can even leave this film on finished parts for protection against damage during shipping and storage.

Connect two panels while protecting the edges from damage.

Also known as door plates, armor plates, and mop plates, kick plates protect the base of a door from damage caused by foot traffic and equipment.

Reinforce the edge of a door to guard it against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors.

Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.

An alternative to caulk and rubber sealants, this tape comes compressed and gradually expands to fill large gaps and voids.

Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.

This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.

Use this flame-retardant tape for sealing in galleys and other harsh, wet environments.

Sunlight, ozone, and water won’t affect these sheets and strips.

Often used as inner tubes, butyl rubber won’t allow air, fumes, or gases to pass through.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Seal glass windows in metal and wood fire-rated doors.

These sealants don't degrade in sunlight.