McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    96 Products

    Tie-Down Winches

    Image of Product. Bolt On/Weld On. Front orientation. Winches. Tie-Down Winches, Bolt On, Weld On.
    Image of Product. Bolt On. Front orientation. Winches. Tie-Down Winches, Bolt On, Bottom Mount.

    Bolt On/Weld On

    Bolt On

    Image of Product. Front orientation. Winches. Tie-Down Winches, Weld On, Side Mount.
    Image of Product. Front orientation. Winches. Tie-Down Winches, Weld On, Bottom Mount.

    Weld On

    Side Mount

    Weld On

    Bottom Mount

    Pair these winches with straps to secure loads for transit. They are designed for right-hand operation.
    Warning: Never use for lifting applications.
    Mount Type—Bolt-on and weld-on winches require a tensioning bar (sold separately). Bolt-on/weld-on winches tension with a 1 1/8" hex wrench.
    Mounting
    Holes
    Mounting
    Location
    For Webbing
    Wd.
    Wt. Cap.,
    lb.
    Ht.
    Wd.
    Dp.
    Material
    Color
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Features
    Each
    Bolt On/Weld On
    Side, Bottom2"3,3354"5"3"Painted Steel, Zinc-Plated SteelBlackNo21/2"Spring-Loaded Release33545T31000000
     
    Bolt On
    Bottom2" to 4"5,5005 1/2"7 3/4"3 1/2"Painted SteelBlackYes221/32"—33545T1800000
     
    Weld On
    Side2" to 4"6,6704 3/8"7 3/4"4"Painted SteelBlack————33545T2500000
    Bottom2" to 4"6,6705 1/2"7 3/4"3 1/2"Painted SteelBlack————33545T1100000
     
    Accessories for Winches
    Easy-ratchet cap slips onto the winch to allow continuous tensioning without removing the tensioning bar.
    Each
    Steel Tensioning Bar33545T19000000
    Steel Easy-Ratchet Cap33545T3700000

    Hand Winches for Webbing—For Horizontal Pulling

    Image of Product. Front orientation. Winches. Hand Winches for Webbing—For Horizontal Pulling.
    Webbing wraps neatly around the winch to prevent tangles in the line.
    Note: Capacity is highest for the first layer of webbing (at least five wraps of webbing on the winch) and decreases as each additional layer of webbing is wound on the winch.
    2 Speeds—Winches with two speeds wind quickly in high gear and more easily in low gear than single-speed winches.
    Winches
    Replacement Webbing
    with Hook on One End
    Wt.
    Cap., lb.
    Base
    Webbing
    Overall
    Max.
    Fully
    Wound
    Wd.
    Lg.
    Wd.
    Lg.,
    ft.
    Wd.
    Lg.
    Ht.
    Handle
    Lg.
    Material
    Hook Opening
    Wd.
    Gear Speed
    Ratio
    No. of
    Speeds
    Each
    Each
    Open Body
    1,1005003 5/8"5 1/8"2"155 1/8"7 1/8"5 1/4"6 3/4"Steel5/8"3.7:112300T540000003169T23000000
    1,6007753 7/8"5 3/8"2"205 3/4"7 7/8"5 3/8"9 1/2"Steel5/8"5.4:112300T550000003169T2500000
    2,0001,0504 3/4"7 1/4"2"206 1/2"10 1/8"6 3/4"9 1/2"Steel5/8"5.4:1, 12.4:122300T560000003169T2500000
    2,5001,3004 7/8"7 3/4"2"256 3/8"10 1/4"7 1/2"9 1/2"Steel5/8"5.4:1, 17.3:122300T570000003169T2700000
    3,2001,8504 7/8"7 3/4"2"206 1/2"10 1/4"7 1/2"9 1/2"Steel5/8"5.4:1, 17.3:122300T580000003169T2800000
     

    Hook-to-Plain End Webbing

    Image of Product. Front orientation. Straps for Winches and Ratchet Straps. Hook-to-Plain End Webbing.
    Image of Attribute. Front orientation. Contains Annotated, Border. Straps for Winches and Ratchet Straps. Hook-to-Plain End Webbing, With Flat Hook.
    Image of Attribute. Front orientation. Contains Annotated, Border. Straps for Winches and Ratchet Straps. Hook-to-Plain End Webbing, With Wire Hook.

    With Flat Hook

    With Wire Hook

    Image of Attribute. Front orientation. Contains Annotated, Border. Straps for Winches and Ratchet Straps. Hook-to-Plain End Webbing, With S-Hook.
    Image of Attribute. Front orientation. Contains Annotated, Border. Straps for Winches and Ratchet Straps. Hook-to-Plain End Webbing, With Latching Hook.

    With S-Hook

    With Latching Hook

    Use this webbing in a winch or add a buckle to create a tie down.
    Warning: Never use for lifting applications.
    PVC-Impregnated Reinforcement—PVC-impregnated webbing offers UV protection and is the most abrasion resistant.
    Reinforced Edges—Webbing with reinforced edges is abrasion and cut resistant.
    Wd.
    Lg.,
    ft.
    Wt. Cap.,
    lb.
    End Fitting
    Material
    End Fitting
    Color
    Hook Opening
    Wd.
    Max. Temp.,
    ° F
    Color
    Each
    Polyester Fabric
     
    With Flat Hook
    1"5700Zinc-Plated Steel—9/16"250Black2107N34000000
    1"10700Zinc-Plated Steel—9/16"250Black2107N3500000
    1"20700Zinc-Plated Steel—9/16"250Black2107N3600000
    1"30700Zinc-Plated Steel—9/16"250Black2107N3700000
    2"53,335Painted SteelBlack7/8"190Yellow2107N1100000
    2"103,335Painted SteelBlack7/8"190Yellow2107N1200000
    2"203,335Painted SteelBlack7/8"190Yellow2107N1300000
    2"273,330Painted SteelBlack5/8"190Yellow9572T5100000
    2"303,330Painted SteelBlack5/8"190Yellow9572T4200000
    3"55,000Painted SteelBlack1 1/16"190Yellow2107N1400000
    3"105,000Painted SteelBlack1 1/16"190Yellow2107N1500000
    3"205,000Painted SteelBlack1 1/16"190Yellow2107N1600000
    3"275,400Painted SteelBlack5/8"190Yellow9572T5400000
    3"305,400Painted SteelBlack5/8"190Yellow9572T5600000
    4"55,400Painted SteelBlack1 1/16"190Yellow2107N1700000
    4"105,400Painted SteelBlack1 1/16"190Yellow2107N1800000
    4"205,400Painted SteelBlack1 1/16"190Yellow2107N1900000
    4"275,400Painted SteelBlack5/8"190Yellow9572T5500000
    4"305,400Painted SteelBlack5/8"190Yellow9572T4700000
     
    With Wire Hook
    1"5700Zinc-Plated Steel—1/2"250Black2107N3800000
    1"10700Zinc-Plated Steel—1/2"250Black2107N3900000
    1"20700Zinc-Plated Steel—1/2"250Black2107N4100000
    2"53,335Zinc-Plated Steel—1 1/16"190Yellow2107N2100000
    2"103,335Zinc-Plated Steel—1 1/16"190Yellow2107N2200000
    2"203,335Zinc-Plated Steel—1 1/16"190Yellow2107N2300000
    2"303,335Zinc-Plated Steel—1 1/16"190Yellow2107N2400000
    3"55,000Zinc-Plated Steel—1 11/16"190Yellow2107N2500000
    3"105,000Zinc-Plated Steel—1 11/16"190Yellow2107N2600000
    3"205,000Zinc-Plated Steel—1 11/16"190Yellow2107N2700000
    3"305,000Zinc-Plated Steel—1 11/16"190Yellow2107N2800000
    4"55,400Zinc-Plated Steel—1 11/16"190Yellow2107N2900000
    4"105,400Zinc-Plated Steel—1 11/16"190Yellow2107N3100000
    4"205,400Zinc-Plated Steel—1 11/16"190Yellow2107N3200000
    4"305,400Zinc-Plated Steel—1 11/16"190Yellow2107N3300000
     
    With S-Hook
    1"5700Zinc-Plated Steel—1 1/16"250Black2107N5200000
    1"10700Zinc-Plated Steel—1 1/16"250Black2107N5300000
    1"20700Zinc-Plated Steel—1 1/16"250Black2107N5400000
    2"5330Zinc-Plated Steel—2"Not RatedYellow2180N1100000
     
    With Latching Hook
    1"5700Zinc-Plated Steel—1/2"250Black2107N4300000
    1"10700Zinc-Plated Steel—1/2"250Black2107N4400000
    1"20700Zinc-Plated Steel—1/2"250Black2107N4500000
    2"53,300Zinc-Plated Steel—1/2"250Yellow2107N4700000
    2"103,300Zinc-Plated Steel—1/2"250Yellow2107N4800000
    2"203,300Zinc-Plated Steel—1/2"250Yellow2107N4900000
    2"303,300Zinc-Plated Steel—1/2"250Yellow2107N5100000
     
    Polyester Fabric with Reinforced Edges
     
    With Flat Hook
    3"275,000Zinc-Plated Steel—1/2"200Yellow3521T3100000
    3"305,000Zinc-Plated Steel—1/2"200Yellow3521T3300000
    4"275,000Zinc-Plated Steel—1/2"200Yellow3521T3200000
    4"305,000Zinc-Plated Steel—1/2"200Yellow3521T3400000
     
    PVC-Impregnated Polyester Fabric
     
    With Flat Hook
    2"273,330Painted SteelBlack1/2"190Orange3792T6100000
    2"303,330Painted SteelBlack1/2"190Orange3792T6200000
    3"274,330Painted SteelBlack5/8"190Orange3792T6900000
    3"304,330Painted SteelBlack5/8"190Orange3792T7100000
    4"275,400Painted SteelBlack5/8"190Orange3792T4100000
    4"305,400Painted SteelBlack5/8"190Orange3792T4200000
     

    Heavy Duty Ratchet Pullers with Webbing

    Image of Product. Front orientation. Ratchet Pullers. Heavy Duty Ratchet Pullers with Webbing.
    These pullers have a thick, rugged frame for long life. They have a soft, wide strap so they won't damage surfaces.
    Webbing
    Hook
    Weight
    Capacity
    Reach
    Length
    Retracted
    Length
    Wd.
    Material
    Handle
    Lg.
    Opening
    Wd.
    Material
    Application
    RFID
    Enabled
    Specs. Met
    Each
    Standard Handle
     
    Steel
    1,500 lb.7 ft.20"1 1/4"Polyester Plastic20"1"Forged SteelNot for LiftingNoASME B30.2133495T350000000
    2,000 lb.10 ft.22"1 3/4"Polyester Plastic30"1"Forged SteelNot for LiftingNoASME B30.2133495T36000000
     

    Ratchet Pullers with Webbing

    Image of Product. Front orientation. Ratchet Pullers. Ratchet Pullers with Webbing.
    These pullers have a soft, wide strap so they won't damage surfaces.
    Webbing
    Hook
    Weight
    Capacity
    Reach
    Length
    Retracted
    Length
    Wd.
    Material
    Handle
    Lg.
    Opening
    Wd.
    Material
    Application
    RFID
    Enabled
    Each
    Standard Handle
     
    Steel
    2,000 lb.12 ft.24 1/2"1"Polyester Plastic19"1"Forged SteelNot for LiftingNo33495T610000000
    4,000 lb.6 ft.24 1/2"1"Polyester Plastic19"1"Forged SteelNot for LiftingNo33495T62000000
     

    Track Fitting-to-Plain End Webbing

    Image of Product. Front orientation. Straps for Winches and Ratchet Straps. Track Fitting-to-Plain End Webbing.
    Add a buckle to this webbing to create a tie down. The track fitting attaches to snap-in load-securing E-track.
    Warning: Never use for lifting applications.
    Wd.
    Lg.,
    ft.
    Wt. Cap.
    End Fitting
    Material
    Max. Temp.,
    ° F
    Color
    Each
    Polyester Fabric
    2"5Not RatedZinc-Plated Steel250Yellow2169N1100000
    2"10Not RatedZinc-Plated Steel250Yellow2169N1200000
    2"20Not RatedZinc-Plated Steel250Yellow2169N1300000
     

    Eye-to-Plain End Webbing

    Image of Product. Front orientation. Straps for Winches and Ratchet Straps. Eye-to-Plain End Webbing.
    Use this webbing with a fitting in a winch or add a buckle to create a tie down.
    Warning: Never use for lifting applications.
    Reinforced Edges—Webbing with reinforced edges is abrasion and cut resistant.
    Eye
    Wd.
    Lg.,
    ft.
    Wt. Cap.,
    lb.
    Lg.
    Type
    Max. Temp.,
    ° F
    Color
    Each
    Polyester Fabric
    4"305,0006"Twisted190Yellow9572T86000000
     
    Polyester Fabric with Reinforced Edges
    3"275,0007"Twisted200Yellow3521T6300000
    3"305,0007"Twisted200Yellow3521T6400000
    4"275,0007"Twisted200Yellow3521T6700000
    4"305,0007"Twisted200Yellow3521T6800000
     

    Ring-to-Plain End Webbing

    Image of Product. Front orientation. Straps for Winches and Ratchet Straps. Ring-to-Plain End Webbing.
    Image of Attribute. Front orientation. Contains Annotated, Border. Straps for Winches and Ratchet Straps. Ring-to-Plain End Webbing.
    Use this webbing with a fitting in a winch or add a buckle to create a tie down.
    Warning: Never use for lifting applications.
    PVC-Impregnated Reinforcement—PVC-impregnated webbing offers UV protection and is the most abrasion resistant.
    Reinforced Edges—Webbing with reinforced edges is abrasion and cut resistant.
    Ring
    Wd.
    Lg.,
    ft.
    Wt. Cap.,
    lb.
    End Fitting
    Material
    Inner
    Lg.
    Style
    Max. Temp.,
    ° F
    Color
    Each
    Polyester Fabric
    2"273,330Zinc-Plated Steel1 7/8"Delta190Yellow9572T73000000
    2"303,330Zinc-Plated Steel1 7/8"Delta190Yellow9572T7400000
    4"275,400Zinc-Plated Steel2 7/8"Delta190Yellow9572T8100000
    4"305,400Zinc-Plated Steel2 7/8"Delta190Yellow9572T8200000
     
    Polyester Fabric with Reinforced Edges
    3"275,000Zinc-Plated Steel2 7/8"Delta200Yellow3521T3500000
    3"305,000Zinc-Plated Steel2 7/8"Delta200Yellow3521T3700000
    4"275,000Zinc-Plated Steel2 7/8"Delta200Yellow3521T3600000
    4"305,000Zinc-Plated Steel2 7/8"Delta200Yellow3521T3800000
     
    PVC-Impregnated Polyester Fabric
    2"273,330Zinc-Plated Steel1 7/8"Delta190Orange3792T5100000
    2"303,330Zinc-Plated Steel1 7/8"Delta190Orange3792T5200000
    3"274,330Zinc-Plated Steel2 1/8"Delta190Orange3792T7400000
    3"304,330Zinc-Plated Steel2 1/8"Delta190Orange3792T7500000
    4"275,400Zinc-Plated Steel2 5/8"Delta190Orange3792T7800000
    4"305,400Zinc-Plated Steel2 5/8"Delta190Orange3792T7900000
     
    back to top