Direct the flow of shielding gas to your weld with these nozzles.

Smooth the flow of shielding gas coming out of your TIG torch nozzle, so you have more control and less waste.

Attach TIG torch nozzles to TIG torches with these collet bodies.

Prevent shielding gas from escaping and protect torch components from excessive heat—these insulators form a seal between nozzle and torch.

Heat your electrode and dip it into the jar to create a point.

These rods create stronger welds than standard TIG welding rods for steel.

These rods create stronger welds than standard TIG welding rods for aluminum.

Grind these electrodes to your exact specifications.

Grind these electrodes to your exact specifications.

Grind these electrodes to your exact specifications.

Grind these electrodes to your exact specifications.

Attach this light to the neck of your welding torch to illuminate the weld area.

Use this wire on steel sheets.

Make welds quickly with this fast-melting wire.

Pair this wire with an MIG gun to fuse aluminum pieces together.

This wire is an alternative to EniFe-Ci covered electrodes.

Keep rusty wire and wire with a poor surface finish feeding smoothly.

For less waste, these holders grasp the electrode close to the end.

These holders offer more hand clearance than standard stick electrode holders.

These electrodes penetrate deeper into the base material for higher-quality welds than standard fast-deposit stick electrodes for steel.

These electrodes are designed for optimum performance when used with an AC power source.

Join gray iron, ductile iron, malleable iron, and alloy cast iron to themselves, and to each other.

These nickel-free electrodes make nonmachinable welds.

Transfer electrodes from a holding oven to the job site.

Also known as a fillet gauge, this gauge measures concave and convex corner weld dimensions.

No compressor needed—a hot-air gun welds your plastics.

Weld stainless steel staple-like stakes into the surface of plastics to repair cracks.

Antispatter resists heat and keeps weld spatter from sticking to contact tips, nozzles, and welding accessories.

This spray lasts up to eight hours so you’re not stopping to reapply.

Keep torch tips clear for a pinpoint flame.

Build a Victor torch or replace parts with our selection of handles, mixers, welding tips, cutting attachments, and cutting tips.

Weld and cut with one system. Kits include single-stage regulators, a torch with check valves to prevent the reverse flow of gas, a torch handle, a cutting attachment, a welding nozzle, a cutting tip, a torch lighter, glasses, and hose.

Attach these arresters to the outlet connection of a regulator on a torch that cuts steel up to 11" thick.

These welders have tongs with pointed welding tips that hold and weld metal pieces together.

The flat tip creates a larger weld and can be used when appearance is less important.

The flat tip creates a larger weld and can be used when appearance is less important.

Two clamps connected by a pivoting arm hold workpieces at nearly any angle.

Each arm has a handle for turning the magnets on and off.

Switch the magnets on these clamps on and off for easy placement and removal of your workpiece.

Turn the handle to tighten these multipurpose tools for strong clamping in nearly any application.

These clamps have twice the capacity of standard C-clamps.

Lighter weight than other metal clamps, these are less likely to bend thin material.

Plastic clamping surfaces prevent damage to material.

Made entirely of fiberglass, these clamps won’t transmit electricity and are chemical resistant. They're often used around electrical equipment as well as in plating and anodizing applications.

With no handle or protruding screw, these clamps can fit into tight spaces.