Turn the handle to tighten these multipurpose tools for strong clamping in nearly any application.

These clamps have twice the capacity of standard C-clamps.

These clamps are made of stainless steel for excellent corrosion resistance.

Made entirely of fiberglass, these clamps won’t transmit electricity and are chemical resistant. They're often used around electrical equipment as well as in plating and anodizing applications.

All components of these clamps are made of aluminum-bronze that is Factory Mutual approved. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

With no handle or protruding screw, these clamps can fit into tight spaces.

Apply pressure to the side of a workpiece as well as the top and bottom.

Plastic clamping surfaces prevent damage to material.

Mount these clamps to a bench top or other surface to keep workpieces in place.

Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface.

Push the lever to lock the handle and prevent accidental opening.

The handle locks in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps.

Push the lever to lock the handle and prevent accidental opening.

Push the lever to lock the handle and prevent accidental opening.

Weld these clamps to the side of an object or drill your own holes in the mounting plate and bolt into place.

Two sets of mounting holes allow mounting on the bottom or side.

The handle locks in a horizontal position for more clearance above the clamp.

These clamps have mounting holes on the bottom.

The clamping arm slides freely along the bar for quick, one handed positioning. Tighten the screw onto a workpiece and the arm locks in place.

For the most demanding jobs, these clamps have almost five times the capacity of standard fast-action bar clamps.

Pull the lever to slide the clamping arm along the bar; release to lock in place.

Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol-grip handle to lock the clamp in place.

All adjustments can be made from one end, allowing clamping in tight spaces.

Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol‐grip handle to lock the clamp in place.

The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Pull the handle to lock or release the clamping arm.

Two swivel pads on each jaw pivot to grip nearly any shape of material.

Turn the knob to adjust the opening size.

Hold pipe and fittings together for tack welding.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Fit the draw arm over a latch plate and pull the handle to clamp.

Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp.

Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications.

Smaller than standard push toggle clamps, these are often used for electronics and small fixturing applications.

Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side.

The handle can be rotated 125° for easier access or extra clearance above the clamp.

Push the lever to lock the handle and prevent accidental opening.

Perform a variety of welding tasks. These pliers have serrated jaws that remove weld spatter and grip, pull, and cut wire. They can also be used to install and remove contact tips and nozzles and turn fittings, nuts, and bolts.

Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.

Mount workpiece holders, light machinery, collaborative robots, and other components onto these tables to create custom workspaces, no drilling or tapping required.

Shorter than coats, jackets cover your hips.

Bright colors and reflective stripes make workers stand out in low-visibility areas. Jackets cover your hips.

Wear these fitted pants under clothing for an added layer of protection.

Protect your torso and thighs from heat and sparks when welding.