Filter by
System of Measurement
Screw Size
Fastener Head Type
Tip Type
For Use In
Flat Head Profile
Drive Style
Softwood Drill Bit Size
Material
Hardwood Drill Bit Size
Threading
Drive Size
Finish
Softwood Drill Bit Size Decimal Equivalent
Approximate Threads per Inch
Tapping Method
Hardwood Drill Bit Size Decimal Equivalent
Export Control Classification Number (ECCN)
DFARS Specialty Metals
REACH
RoHS
About Tapping Screws
More
Steel Phillips Flat Head Screws for Wood
These screws are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the top of the head.
Zinc-plated steel screws resist corrosion in wet environments.
Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drive Size | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
No. 24  | |||||||||||
| 2" | 0.756" | 0.23" | No. 4 | 3/16" | 7/32" | 7 | Partially Threaded | 1.333" | 10 | 000000000 | 000000 |
| 3" | 0.756" | 0.23" | No. 4 | 3/16" | 7/32" | 7 | Partially Threaded | 1.98" | 10 | 000000000 | 00000 |
| 4" | 0.756" | 0.23" | No. 4 | 3/16" | 7/32" | 7 | Partially Threaded | 2.667" | 5 | 000000000 | 00000 |
| 5" | 0.756" | 0.23" | No. 4 | 3/16" | 7/32" | 7 | Partially Threaded | 3" | 5 | 000000000 | 00000 |
| 6" | 0.756" | 0.23" | No. 4 | 3/16" | 7/32" | 7 | Partially Threaded | 3" | 5 | 000000000 | 00000 |