Extrude melted filament onto print surfaces to build 3D printed parts.

Also known as build sheets, stick these sheets to your printer bed for more accurate 3D printed parts than those made on bare printer beds, masking tape, and glue.

Shield your 3D printer's heating element, or hot end, from sticky filament buildup with these nonstick silicone covers. By repelling plastic and keeping the heating block clean, they increase the heating block's life and prevent stuck filament from dripping off and ruining prints.

Make parts that protect equipment from electrostatic shocks without clogging your nozzle, warping your part, or needing a heated printer bed. These filaments have a base of PLA, the most common filament thanks to its low melting point, with a compound that diverts electrostatic discharges in a controlled way.

Bumps, scrapes, and falls won’t damage these tough filaments. Known for their durability, they absorb impact without cracking or breaking, and won’t degrade when heated. Use them to print tool handles, storage cases, and other parts that are handled or dropped frequently.

Create tool handles, tote trays, enclosures, and other parts that are banged or dropped often and used near sensitive electronics. These filaments are made of durable ABS or polycarbonate—roughly four times tougher than PLA—with a compound that diverts electrostatic discharges away from equipment.

Make packaging and containers for sensitive electronics that will safely divert electrostatic charges while shielding them from almost any solvents, acids, and bases. These filaments combine the exceptional chemical-resistance properties of PPS with a compound that makes it static dissipative.

Parts made with these filaments remain strong and rigid in temperatures that would soften most plastics.

When 3D printing a model with overhangs or hollow spaces, use these filaments to prevent the model from losing its shape. They support the structure during the printing and cooling process, then dissolve or snap away once the part is hardened.

Create gears, bearings, washers and other hard-working parts that may be used in or near flammable machinery.

Made of pliable TPU with a conductive compound, these filaments produce wire, circuits, and other components that direct the flow of electricity in wearable and flexible devices, from watches to grippers.

Compatible with the MakerBot Replicator 2 Desktop 3D Printer and all Fifth Generation MakerBot Replicator 3D printers.

Print water-resistant packaging or other parts that will be used near sensitive electronics with these filaments.

With the male threaded end on these inserts, mount components directly to plastic parts.

The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.

A zinc-plated finish gives these steel inserts mild corrosion resistance.

Spray these primers onto a mounting surface to quickly and smoothly apply signs, labels, and protective films.

Place these dehumidifiers in small spaces to protect moisture-sensitive materials such as photo lenses or 3D printing filaments. While they don’t need a battery or power cord during use, you do plug them in to dry them out—unlike other desiccants, they don’t require an oven.

Know when it's time to change these desiccants—they turn from blue to pink after absorbing 8% of their weight.

With a built-in controller and driver, these stepper motors come ready to program and operate.

Move belts forward and backward or stop and start them in precise positions, especially in areas where rust is a concern.

Measure the relative humidity and temperature of indoor spaces.

The slippery surface on this FEP film prevents sticking. Use it as a release film when making molded parts.

Precisely control the cleaning process by setting the temperature and time.

In addition to a cleaner, this solution performs as a disinfectant, deodorant, germicide, and fungicide.

Also known as semi-aqueous cleaning solutions, these consist of water and other components such as ammonia or citrus. They clean parts with heavy contamination such as buffing and lapping compounds.

With a low coefficient of friction, these pellets won't wear away from abrasion that’s often caused by contact with moving parts. Melt and mold them into desired shapes.

Add color when making plastic parts.