Connection Style Connection Style |
|---|
 |
| Compression |
 |
| Quick Disconnect |
 |
| Threaded |
Quick-Disconnect Component Quick-Disconnect Component |
|---|
 |  |
| Plug | Socket |
 | |
| Plug and Socket Set |
Flow Control Flow Control |
|---|
|
Material Material |
|---|
|
For Tube Material For Tube Material |
|---|
|
Sleeve Material Sleeve Material |
|---|
|
Length Length |
|---|
Nut Material Nut Material |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Maximum Vacuum Maximum Vacuum |
|---|
|
Latch Material Latch Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Plastic Quick-Disconnect Tube Couplings for Air and Water
Lighter in weight than their metal counterparts, these quick-disconnect couplings are plastic. They consist of a plug and a socket that allow you to frequently connect and disconnect your line.
Latch-lock sockets disconnect by pressing the latch.
Acetal plugs and sockets are moisture resistant, so they won’t absorb water and lose strength, even in high-humidity environments. Plug and Sockets with shut-off have a valve to stop the flow when the coupling is separated, so air or water won’t spill from your line.
Note: For a complete coupling, order a plug and a socket with the same coupling size.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -40° to 180° F
- Tubing: Use with firm or hard (Durometer 85A-60D) nylon plastic or polyethylene plastic
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
- Temperature Range: -40° to 180° F
- Tubing: Use with firm or hard (Durometer 85A-60D) nylon plastic or polyethylene plastic
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
- Temperature Range: -40° to 180° F
- Tubing: Use with nylon plastic or polyethylene plastic, see table for hardness
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
For Tube | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | Plug OD | For Tube ID, mm | For Tube OD | Material | Color | Max. Pressure | Hardness Rating | Hardness | Each | |
Open Flow | ||||||||||
| 1/8 | 5/16" | __ | 5/32" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | 00000000 | 00000 |
| 1/8 | 5/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | 0000000 | 0000 |
| 1/8 | 5/16" | __ | 3/8" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | 0000000 | 0000 |
| 1/8 | 5/16" | 2 | 4mm | Acetal Plastic | White | 100 psi @ 72° F | __ | __ | 00000000 | 0000 |
| 1/4 | 7/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | 00000000 | 0000 |
| 1/4 | 7/16" | __ | 3/8" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | 0000000 | 0000 |
With Shut-Off | ||||||||||
| 1/8 | 5/16" | __ | 5/32" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | 00000000 | 00000 |
| 1/8 | 5/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | 0000000 | 00000 |
| 1/8 | 5/16" | __ | 3/8" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | 0000000 | 00000 |
| 1/8 | 5/16" | 2 | 4mm | Acetal Plastic | White | 100 psi @ 72° F | __ | __ | 00000000 | 00000 |
| 1/4 | 7/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | 00000000 | 00000 |
| 1/4 | 7/16" | __ | 3/8" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | 0000000 | 00000 |
- Temperature Range: -40° to 180° F
- Tubing: Use with firm or hard (Durometer 85A-60D) nylon plastic or polyethylene plastic
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Through-wall plugs and sockets are also known as bulkhead and panel-mount plugs and sockets; they mount through your wall or panel to create an inlet or outlet.
Open Flow | With Shut-Off | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | Plug OD | For Tube OD | Material | Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | Each | ||
| 1/8 | 5/16" | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | 1/2" | 19/64" | 00000000 | 000000 | 00000000 | 000000 |
| 1/4 | 7/16" | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | 11/16" | 19/64" | 00000000 | 00000 | 00000000 | 00000 |
| 1/4 | 7/16" | 3/8" | Acetal Plastic | White | 100 psi @ 72° F | 11/16" | 19/64" | 00000000 | 00000 | 00000000 | 00000 |
- Temperature Range: -40° to 180° F
- Tubing: Use with nylon plastic or polyethylene plastic
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Open Flow | ||||||||
|---|---|---|---|---|---|---|---|---|
| Coupling Size | Plug OD | For Tube ID, mm | For Tube OD | Material | Color | Max. Pressure | Each | |
| 1/8 | 5/16" | 2.5 | 4mm | Acetal Plastic | White | 100 psi @ 72° F | 00000000 | 00000 |
- Temperature Range: -40° to 180° F
- Tubing: Use with nylon plastic or polyethylene plastic, see table for hardness
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
For Tube | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | For Plug OD | For Tube ID, mm | For Tube OD | Material | Color | Max. Pressure | Hardness Rating | Hardness | Socket Locking Type | Each | |
Open Flow | |||||||||||
| 1/8 | 5/16" | __ | 5/32" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | Latch | 00000000 | 000000 |
| 1/8 | 5/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | Latch | 0000000 | 00000 |
| 1/8 | 5/16" | 2 | 4mm | Acetal Plastic | White | 100 psi @ 72° F | __ | __ | Latch | 00000000 | 00000 |
| 1/4 | 7/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | Latch | 00000000 | 00000 |
| 1/4 | 7/16" | __ | 3/8" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | Latch | 0000000 | 00000 |
With Shut-Off | |||||||||||
| 1/8 | 5/16" | __ | 5/32" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | Latch | 00000000 | 00000 |
| 1/8 | 5/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | Latch | 0000000 | 00000 |
| 1/8 | 5/16" | 2 | 4mm | Acetal Plastic | White | 100 psi @ 72° F | __ | __ | Latch | 00000000 | 00000 |
| 1/4 | 7/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | Latch | 00000000 | 00000 |
| 1/4 | 7/16" | __ | 3/8" | Acetal Plastic | White | 100 psi @ 72° F | Firm, Hard | Durometer 85A-60D | Latch | 0000000 | 00000 |
- Temperature Range: -40° to 180° F
- Tubing: Use with firm or hard (Durometer 85A-60D) nylon plastic or polyethylene plastic
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Through-wall plugs and sockets are also known as bulkhead and panel-mount plugs and sockets; they mount through your wall or panel to create an inlet or outlet.
| Coupling Size | For Plug OD | For Tube ID, mm | For Tube OD | Material | Color | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Socket Locking Type | Each | |
Open Flow | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/8 | 5/16" | __ | 5/32" | Acetal Plastic | White | 100 psi @ 72° F | 1/2" | 1/2" | Latch | 00000000 | 000000 |
| 1/8 | 5/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | 1/2" | 1/2" | Latch | 0000000 | 00000 |
| 1/8 | 5/16" | 2 | 4mm | Acetal Plastic | White | 100 psi @ 72° F | 1/2" | 1/2" | Latch | 00000000 | 00000 |
| 1/4 | 7/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | 11/16" | 1/2" | Latch | 00000000 | 00000 |
| 1/4 | 7/16" | __ | 3/8" | Acetal Plastic | White | 100 psi @ 72° F | 11/16" | 1/2" | Latch | 0000000 | 00000 |
With Shut-Off | |||||||||||
| 1/8 | 5/16" | __ | 5/32" | Acetal Plastic | White | 100 psi @ 72° F | 1/2" | 1/2" | Latch | 00000000 | 00000 |
| 1/8 | 5/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | 1/2" | 1/2" | Latch | 0000000 | 00000 |
| 1/8 | 5/16" | 2 | 4mm | Acetal Plastic | White | 100 psi @ 72° F | 1/2" | 1/2" | Latch | 00000000 | 00000 |
| 1/4 | 7/16" | __ | 1/4" | Acetal Plastic | White | 100 psi @ 72° F | 11/16" | 1/2" | Latch | 00000000 | 00000 |
| 1/4 | 7/16" | __ | 3/8" | Acetal Plastic | White | 100 psi @ 72° F | 11/16" | 1/2" | Latch | 0000000 | 00000 |
Brass Quick-Disconnect Tube Couplings for Air
- Temperature Range: 0° to 180° F
- Tubing: Use with hard polyethylene plastic or polypropylene plastic
An all-brass body gives these quick-disconnect couplings better durability than plastic quick-disconnect couplings. They have a chrome plating for excellent protection in corrosive environments. Couplings consist of a plug and a socket that join with a latch, so you can easily connect and disconnect your line. To connect, insert the plug into the socket; to disconnect, press the latch and remove the plug.
Plugs and sockets with shut-off have a valve to stop the flow when the coupling is separated, so air won’t leak from your line.
Note: For a complete coupling, order a plug and a socket with the same coupling size.
For technical drawings and 3-D models, click on a part number.
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Through-wall sockets are also known as bulkhead sockets and panel mount sockets; they mount through your wall or panel to create an inlet or outlet.
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Through-wall sockets are also known as bulkhead sockets and panel mount sockets; they mount through your wall or panel to create an inlet or outlet.
High-Pressure Quick-Disconnect Tube Couplings for Air
Not only do these chrome-plated brass couplings have excellent corrosion resistance, they also withstand pressures up to 250 psi. Couplings consist of a plug and a socket (sold separately) that join with a latch, so you can frequently connect and disconnect your line. To connect, insert the plug into the socket; to disconnect, press the latch on the socket and remove the plug.
Plugs and Sockets with shut-off have a valve to stop the flow when the coupling is separated, so air won’t leak from your line.
Note: For a complete coupling, order a plug and a socket with the same coupling size.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -40° to 180° F
- Tubing: Use with firm or hard (Durometer 85A-60D) nylon plastic or polyethylene plastic
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
- Temperature Range: -40° to 180° F
- Tubing: Use with firm or hard (Durometer 85A-60D) nylon plastic or polyethylene plastic
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Through-wall plugs and sockets are also known as bulkhead and panel-mount plugs and sockets; they mount through your wall or panel to create an inlet or outlet.
Open Flow | With Shut-Off | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | Plug OD | For Tube OD | Material | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | Each | ||
| 1/8 | 5/16" | 1/4" | Chrome-Plated Brass | 250 psi @ 72° F | 1/2" | 19/64" | 00000000 | 000000 | 00000000 | 000000 |
| 1/4 | 7/16" | 1/4" | Chrome-Plated Brass | 250 psi @ 72° F | 11/16" | 19/64" | 00000000 | 00000 | 00000000 | 00000 |
| 1/4 | 7/16" | 3/8" | Chrome-Plated Brass | 250 psi @ 72° F | 11/16" | 19/64" | 00000000 | 00000 | 00000000 | 00000 |
- Temperature Range: -40° to 180° F
- Tubing: Use with firm or hard (Durometer 85A-60D) nylon plastic or polyethylene plastic
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Open Flow | With Shut-Off | |||||||
|---|---|---|---|---|---|---|---|---|
| Coupling Size | For Plug OD | For Tube OD | Material | Max. Pressure | Each | Each | ||
| 1/8 | 5/16" | 1/4" | Chrome-Plated Brass | 250 psi @ 72° F | 00000000 | 000000 | 00000000 | 000000 |
| 1/4 | 7/16" | 1/4" | Chrome-Plated Brass | 250 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
| 1/4 | 7/16" | 3/8" | Chrome-Plated Brass | 250 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 |
- Temperature Range: -40° to 180° F
- Tubing: Use with firm or hard (Durometer 85A-60D) nylon plastic or polyethylene plastic
Compression plugs and sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Through-wall plugs and sockets are also known as bulkhead and panel-mount plugs and sockets; they mount through your wall or panel to create an inlet or outlet.
Open Flow | With Shut-Off | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | For Plug OD | For Tube OD | Material | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | Each | ||
| 1/8 | 5/16" | 5/32" | Chrome-Plated Brass | 250 psi @ 72° F | 1/2" | 1/2" | 00000000 | 000000 | 00000000 | 000000 |
| 1/8 | 5/16" | 1/4" | Chrome-Plated Brass | 250 psi @ 72° F | 1/2" | 1/2" | 00000000 | 00000 | 00000000 | 00000 |
| 1/4 | 7/16" | 1/4" | Chrome-Plated Brass | 250 psi @ 72° F | 11/16" | 1/2" | 00000000 | 00000 | 00000000 | 00000 |
| 1/4 | 7/16" | 3/8" | Chrome-Plated Brass | 250 psi @ 72° F | 11/16" | 1/2" | 00000000 | 00000 | 00000000 | 00000 |
Quick-Disconnect Couplings for Plastic Tubing—Gasoline
- Tempearture Range: 0° to 150° F
- Tubing: Use with firm (Durometer 45D) polyethylene or polypropylene plastic, except fittings with male threaded pipe connection
Couplings consist of a plug and a socket (sold separately) that join with a latch, so you can frequently connect and disconnect your line. To connect, insert the plug into the socket; to disconnect, press the latch and remove the plug. Plugs and sockets are 316 stainless steel for excellent corrosion resistance.
Plugs and sockets with shut-off have a valve to stop the flow when the coupling is separated, so gasoline won’t spill from your line.
Note: For a complete coupling, order a plug and a socket with the same coupling size.
For technical drawings and 3-D models, click on a part number.
Compression plugs have a sleeve (ferrule) that bites into the tubing and forms a seal when you tighten the nut.
Compression sockets have a sleeve (ferrule) that bites into the tubing and forms a seal when you tighten the nut.
Through-wall sockets are also known as bulkhead sockets and panel-mount sockets; they mount through your wall or panel to create an inlet or outlet.
Quick-Disconnect Tube Couplings for Food and Beverage
- Temperature Range:
Acetal Plastic: -40° to 180° F
Polypropylene Plastic: 32° to 160° F - Tubing:
Barbed Fittings: Use with soft or firm (Durometer 65A-80A) polyurethane rubber
Compression Fittings: Use with hard or firm (Durometer 80A-60D) nylon or polyethylene plastic - Specifications Met: NSF/ANSI 169
Couplings consist of a plug and a socket (sold separately) that join with a latch, so you can frequently connect and disconnect your line. To connect, insert the plug into the socket; to disconnect, press the latch on the socket and remove the plug. They’re made of FDA-approved materials, including moisture-resistant plastic that won’t absorb liquid and lose strength, even in high-humidity food and beverage applications.
Plugs and sockets with shut-off have a valve to stop the flow when the coupling is separated, so fluid won’t spill from your line.
Note: For a complete coupling, order a plug and a socket with the same coupling size.
For technical drawings and 3-D models, click on a part number.
Compression plugs have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.
Compression sockets have a sleeve (ferrule) that compresses the tubing and forms a seal when you tighten the nut.