A calibration certificate traceable to NIST is included with these stainless steel rulers.

Made of aluminum, these rulers are an economical alternative to stainless steel rulers.

Rulers have large numbers and deeply etched graduations.

A cork back prevents slipping and protects delicate surfaces.

Made of wood with a clear protective coating, this ruler is an economical choice for measuring objects up to three feet long.

These rulers include a certificate of calibration traceable to NIST with test measurements that confirm accuracy.

Ensure reliable, repeatable measurements with these rulers.

A reversible, removable hook grabs the edge of an object for easy alignment.

Permanently mount these rulers to a machine or workbench.

Rulers are narrow and just 6" long to measure in tight spaces.

Create a ruler up to 192" long by adding continuous segments.

These extra-thick rulers have a polycarbonate coating that resists wear from traffic and chemicals.

Measurements are printed from top to bottom for measuring heights and depths.

Use to measure heights and tank levels.

Slide the lock to hold the blade in place. The case is chrome-plated, impact-resistant plastic.

The first 3" of the blade is reinforced with a wear-resistant plastic coating.

A wear-resistant plastic coating reinforces the first 3" of the blade. The blade remains rigid up to 13 feet.

The case is impact-resistant plastic that's yellow for high visibility. Slide the lock to hold the blade in place.

The blade locks in place when extended until you press the release lever, and a magnetic-hook tip attaches to metal surfaces to assist vertical and distance measuring.

These tape measures have a chrome-plated, impact-resistant plastic case.

Compared to standard tape measures, these are less than half the size.

The blade on these tape measures is chrome-plated for durability and corrosion resistance.

For a comfortable and secure hold, these tape measures have a narrow case with a molded rubber grip.

All internal parts, including the blade, are stainless steel for corrosion resistance.

Attach to curved or flat steel surfaces.

At about half the size of standard diameter tape measures, these fit in your pocket.

Also known as tree tapes, wrap these tape measures around circular items to determine diameter and measure circumference without the need for calculations.

Easily spot the brightly colored case on these tape measures around your worksite and in your toolbox.

Measure distances over 35 ft.

Find the exact center of your work. Measure the total distance with the upper scale; then find the same number on the bottom scale—that's your center point.

Measure volume in gallons without calculations.

Permanently mount these vertical rulers to walls and tanks.

Also known as oil-gauging tapes, use these tape measures to check the level of oil and other fluids in deep, large containers such as tanks and vats.

Move the jaw along the ruler to take inside and outside measurements.

Reach deep into small holes and slots for precise depth measurements.

Increase the accuracy of your manual machine when you fit it with a linear scale.

Also known as carpenters’ and framing squares, these have graduations on both blades for horizontal and vertical measurements.

Measure angles with these round protractors.

Measure outer diameter and mark lines around pipe.

A rule, compass, protractor, and template all in one tool.

A protractor and triangle in one, use these tools to quickly set any angle from 0° to 90°.

Form custom shapes for drawing.