For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
|
Pump Activation Type Pump Activation Type |
|---|
|
Maximum Flow Rate Maximum Flow Rate |
|---|
Duty Cycle Duty Cycle |
|---|
|
Maximum Feet of Head Maximum Feet of Head |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Electrical Connection Type Electrical Connection Type |
|---|
|
Pump Type Pump Type |
|---|
|
Phase Phase |
|---|
|
About Sump, Water-Removal, Condensate, and Submersible Pumps
More
How to Prime Your Pump
More
How to Determine Feet of Head
More
Compact Water-Removal Pumps
Also known as bilge pumps, these remove fresh and salt water from spots where other pumps don’t fit. They have an internal sensor, so they turn on when they detect water and turn off when the water is removed. Pumps are fully submersible. They are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.
Pumps for 12 volts DC work with 12-volt batteries. Pumps with an ABS housing have a battery cable connector.
Pumps for 120 volts AC and pumps with an acetal housing are for use in debris-free water.
Max. Flow Rate, gpm | Discharge | Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 5 Ft. of Head | @ 10 Ft. of Head | Max. Ft. of Head, ft. | Removes Water Down To | Temp. Range, °F | Sensor Time Interval | Horsepower | Current, A | For Tube ID | Gender | Dia. | Ht. | Each | |
ABS Plastic Housing | |||||||||||||
Hardwire with 2 ft. Cord | |||||||||||||
| 5 | 1 | 11 | 1/4" | 30° to 140° | 2.5 min. | Not Rated | 1.6 | 3/4" | Male | 3" | 4" | 0000000 | 000000 |
| 10 | 3 | 10 | 1/4" | 30° to 140° | 2.5 min. | Not Rated | 3.7 | 1", 1 1/8" | Male | 3" | 5" | 0000000 | 000000 |
Acetal Plastic Housing | |||||||||||||
Hardwire with 2 ft. Cord | |||||||||||||
| 15 | 7 | 12 | 1/4" | 35° to 120° | 2.5 min. | Not Rated | 4.8 | 1 1/8" | Male | 4 3/4" | 7 3/4" | 0000000 | 000000 |
| 24 | 18 | 20 | 1/4" | 35° to 120° | 2.5 min. | Not Rated | 8.4 | 1 1/8" | Male | 4 3/4" | 7 3/4" | 0000000 | 000000 |
| 35 | 26 | 20 | 1/4" | 35° to 120° | 2.5 min. | Not Rated | 15.5 | 1 1/2" | Male | 5" | 8 1/4" | 0000000 | 000000 |
| 37 | 26 | 20 | 1/4" | 35° to 120° | 2.5 min. | Not Rated | 15.5 | 2" | Male | 5" | 9 1/4" | 0000000 | 000000 |
Max. Flow Rate, gpm | Discharge | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 5 Ft. of Head | @ 10 Ft. of Head | Max. Ft. of Head, ft. | Removes Water Down To | Temp. Range, °F | Sensor Time Interval | Horsepower | Current | Pipe Size | Thread Type | Gender | Dia. | Ht. | Includes | Each | |
ABS Plastic Housing | |||||||||||||||
Hardwire with 8 ft. Cord | |||||||||||||||
| 20 | 13 | 18 | 1" | 40° to 140° | 2.5 min. | Not Rated | Not Rated | 3/4 | NPT | Male | 5" | 8" | Garden Hose Adapter | 0000000 | 0000000 |
Hardwire with 24 ft. Cord | |||||||||||||||
| 20 | 13 | 18 | 1" | 40° to 140° | 2.5 min. | Not Rated | Not Rated | 3/4 | NPT | Male | 5" | 8" | Garden Hose Adapter | 0000000 | 000000 |
Battery-Operated Water-Removal Pumps
Remove water in locations without power with these battery-operated pumps. Do not run dry.
Continuous duty pumps attach to a 12-volt battery. They are gravity fed and require an elevated liquid source to fully fill the pump before turning on.
Max. Flow Rate, gpm | Discharge | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 4 Ft. of Head | @ 5 Ft. of Head | @ 8 Ft. of Head | @ 10 Ft. of Head | @ 15 Ft. of Head | @ 20 Ft. of Head | Max. Flow Rate | Max. Ft. of Head, ft. | Temp. Range, °F | Current, A | For Tube OD | Gender | Ht. | Wd. | Lg. | Each | |
| 15 | 12 | 7 | __ | __ | __ | 20 gpm | 18 | 30° to 120° | 12 | 1 1/4" | Female | 8" | 6" | 6 1/2" | 0000000 | 0000000 |
| 45 | 42 | 28 | 25 | 13 | __ | 65 gpm | 22 | 30° to 120° | 20 | 2" | Female | 10 1/2" | 5 1/2" | 7" | 0000000 | 000000 |
| 92 | 83 | 57 | 51 | 28 | 8 | 133 gpm | 24 | 30° to 120° | 30 | 3" | Female | 8 1/2" | 12" | 13 1/2" | 0000000 | 000000 |
Corrosion-Resistant Gasoline-Powered
Water-Removal Pumps
Built with high-chromium stainless steel components, this pump stands up to salt water with up to 25% sand by volume and resists wear caused by abrasive particles. Fill the fuel tank with gasoline to remove water at sites without power. Pump is self-priming, which means it creates a suction force to draw liquid upward and fill the pump chamber. Mount up to 20 feet above your liquid source. Pump has a pull-start engine. It is not submersible.
Wheel kits (sold separately) include two 10" diameter wheels, hardware, and fasteners.
Note: Pump must be filled with liquid before use. It needs a constant flow of liquid and cannot run dry.
Max. Flow Rate, gpm | Intake | Discharge | Overall | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 20 Ft. of Head | @ 50 Ft. of Head | @ 70 Ft. of Head | @ 90 Ft. of Head | Max. Feet of Head, ft. | Max. Solids Dia. | Removes Water Down To | Tank Cap., qt. | Temp. Range, °F | Horsepower | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Ht. | Wd. | Lg. | Each | |
| 153 | 125 | 93 | 58 | 98 | 1/2" | 10 ft. | 3.8 | 40° to 160° | 5 hp | 2 | NPT | Female | 2 | NPT | Female | 20" | 20" | 25" | 0000000 | 000000000 |
| Wheel Kit | 00000000 | Each | 0000000 |
| Includes | Each | |
| 20 ft. of PVC Suction Hose (2 NPS Male × 2 NPS Female) 50 ft. of PVC Discharge Hose (2 NPS Male × 2 NPS Female) Suction Strainer Two Steel Adapters (2 NPS Male × 2 NPT Male) | 0000000 | 0000000 |
Submersible Pumps for Salt Water
Circulate salt water in submerged and open-air applications. These pumps use magnets to turn the impellers so there is no shaft seal to wear out. They must be wired to a plug (not included) to activate. Do not run dry.
Max. Flow Rate, gpm | Intake | Discharge | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @ 1 Ft. of Head | @ 5 Ft. of Head | Max. Ft. of Head, ft. | Temp. Range, °F | Horsepower | Current, A | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Ht. | Wd. | Dp. | Each | |
120V AC, Single Phase—With Thermal Overload Protection | ||||||||||||||||
Hardwire | ||||||||||||||||
| 5 | 3.8 | 13 | 35° to 130° | 1/50 hp | 0.9 | 3/8 × 3/4 | NPT × NPT | Female × Male | 1/4 | NPT | Male | 4 1/8" | 6 1/8" | 4 7/8" | 00000000 | 0000000 |
| 8.5 | 8 | 19 | 35° to 130° | 1/20 hp | 2 | 3/4 | NPT | Female | 1/2 | NPT | Male | 4 7/8" | 7 3/8" | 4 3/4" | 00000000 | 000000 |