Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water. Use these low-profile screws where space is limited.

18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic.

Known for their high strength-to-weight ratio, these titanium screws are as strong as alloy steel and about 40% lighter. They stand up to salt water, acids, and chemicals.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer. Screws may be mildly magnetic.

These aluminum screws are lightweight and resist corrosion in wet environments. They have a flange that is wider and thicker than our other flanged screws, so they distribute pressure the best.

Comparable in diameter to a washer, the flange on these screws distributes pressure better than standard flanged screws. Made from 316 stainless steel, they have excellent resistance to chemicals and salt water. Screws may be mildly magnetic.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Made from alloy steel, these screws are nearly twice as strong as stainless steel flat head screws.

These screws are drilled through the shaft to vent fluids and gases trapped under the screw.

Also known as pin-in-hex, install and remove these screws with a tamper-resistant hex driver.

Comparable in strength to Grade 8 steel. These screws have inch thread sizes.

Use these screws in thin materials; they have a shorter threaded portion than our standard shoulder screws. They’re comparable in strength to Grade 8 steel.

Made from 18-8 stainless steel, these inch-sized shoulder screws have good chemical resistance.

More corrosion resistant than 18-8 stainless steel shoulder screws, these have excellent resistance to chemicals and salt water. These screws have inch thread sizes.

These shoulder screws are chemical resistant, nonconductive, and lightweight.

Titanium shoulder screws have a high strength-to-weight ratio and are more resistant to acids and salt water than nickel shoulder screws.

The head height of these screws is about two-thirds the head height of a standard shoulder screw. Use them in low-clearance applications such as inside machines.

A locking element on the threads adds friction to resist loosening. Comparable to Grade 8 steel, these alloy steel shoulder screws are the strongest we offer.

More corrosion resistant than 18-8 stainless steel shoulder screws, these have excellent resistance to chemicals and salt water.

With a hex socket at the tip as well as the head, you can fasten these shoulder screws from the tip when the head cannot be reached.

Install and remove these shoulder screws by hand or with a hex key.

Made of 416 stainless steel, these shoulder screws are almost twice as strong as 18-8 stainless steel and have the same corrosion resistance.

Brass shoulder screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

These screws have a head height about one-third the head height of a standard shoulder screw. Use them in low-clearance applications such as inside machines.

Made from alloy steel, these inch size set screws have a thin edge that digs into hard surfaces for a secure hold.

Made from 18-8 stainless steel, these set screws have good chemical resistance.

Made from 316 stainless steel, these set screws have excellent chemical resistance and can be used in saltwater environments.

More corrosion resistant than stainless steel, nickel alloy set screws have excellent resistance to salt water and some acids.

These 18-8 stainless steel set screws are chemical resistant. They have a nylon locking patch that grips threads to resist loosening.

Made from black-oxide alloy steel, these set screws resist corrosion in dry environments. They dig into hard surfaces for a secure hold and have serrations on the cup edge that grip the material surface to resist loosening.

Made from 18-8 stainless steel, these set screws are chemical resistant. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

A nylon locking patch grips threads to resist loosening.

These alloy steel set screws have an extra-soft nylon tip, which minimizes the damage that can occur from metal-on-metal contact. Use them set screws on soft surfaces such as aluminum.

These set screws have a tip that is harder than nylon and silver to provide a secure hold on hard surfaces. The body is 18-8 stainless steel for good chemical resistance.

Made of alloy steel, these set screws are often used in U-shaped and V-shaped grooves and on other sloped or angled surfaces. The oval tip allows for frequent adjustments with minimal surface damage.

Also known as half dog-point set screws, these set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

Also known as full dog-point set screws, the tip is twice as long as the tip on other extended-tip set screws for greater engagement in deep mating holes.

These alloy steel set screws have a pointed tip that wedges into the contact surface for a secure hold on soft materials such as brass.

A rolling ball swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw.

Also known as jam set screws, these lock other screws in place, hold pins, and adjust spring tension. A black-oxide finish provides corrosion resistance in dry environments.

These set screws have a low-profile flat-faced ball tip for use in low-clearance applications.

The tip is narrow to pass through threaded holes.

Install with a hex key for more torque than slotted long-nose spring plungers.