About Sealant Flexibility
More
About Structural Adhesives
More
Thread Sealants with PTFE
PTFE provides a slippery surface that keeps threads from binding. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.
Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.
To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
Container | Max. Pressure, psi | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Each | |
Low Locking Strength | |||||||||||||
Loctite® Sealants | |||||||||||||
567 | 11.8 | Brush-Top Can | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 400° | 3" | Paste | NSF/ANSI 61, UL Listed | White | 0000000 | 0000000 |
Non-Hardening Thread Sealants with PTFE
PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.
To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
VOC (volatile organic compounds) regulations restrict sales of sealants that cannot be sold to the listed jurisdictions/areas.
Container | Max. Pressure, psi | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Cannot Be Sold To | Each | |
Low Locking Strength | ||||||||||||
Loctite® Sealants | ||||||||||||
5113 | 16 | Brush-Top Can | Not Rated | Not Rated | -65° to 300° | 2" | Paste | __ | White | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | 0000000 | 000000 |
Slic-Tite Sealants | ||||||||||||
__ | 4 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | NSF/ANSI 61, UL Listed | White | __ | 0000000 | 00000 |
__ | 8 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | NSF/ANSI 61, UL Listed | White | __ | 0000000 | 00000 |
__ | 16 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | NSF/ANSI 61, UL Listed | White | __ | 0000000 | 00000 |
__ | 32 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | NSF/ANSI 61, UL Listed | White | __ | 0000000 | 00000 |
Sealants | ||||||||||||
__ | 4 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 3" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | 0000000 | 00000 |
__ | 8 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 3" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | 0000000 | 00000 |
__ | 16 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | 00000000 | 00000 |
__ | 32 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | 00000000 | 00000 |
Non-Hardening Thread Sealants
Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.
To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
Sealants that cannot be sold to the listed regions are restricted due to local VOC (Volatile Organic Compounds) regulations.
Container | Max. Pressure, psi | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Cannot Be Sold To | Each | |
Low Locking Strength | ||||||||||||
Loctite® Sealants | ||||||||||||
5117 | 16 fl. oz. | Brush-Top Can | 10,000 | 10,000 | -65° to 400° | 2" | Thick Liquid | __ | Black | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, Northern VA | 0000000 | 000000 |
5438 | 16 fl. oz. | Brush-Top Can | 10,000 | 10,000 | -65° to 300° | 2" | Paste | __ | White | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, Northern VA | 0000000 | 00000 |
Sealants | ||||||||||||
__ | 8 fl. oz. | Brush-Top Can | 10,000 | 300 | -65° to 450° | 2" | Paste | MIL-S-15204, UL Recognized Component | Gray | __ | 0000000 | 00000 |
__ | 8 fl. oz. | Brush-Top Can | 6,000 | 3,000 | 20° to 140° | __ | Paste | NSF/ANSI 61 | Blue | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, Northern VA | 000000 | 00000 |
Non-Hardening High-Temperature Thread Sealants
Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.
Container | Max. Pressue, psi | ||||||||
---|---|---|---|---|---|---|---|---|---|
Net Weight, lbs. | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Color | Each | |
Low Locking Strength | |||||||||
Key Graphite Sealants | |||||||||
0.625 | Brush-Top Can | 15,000 | 15,000 | -30° to 750° | 4" | Paste | Black | 000000 | 000000 |
Edge Sealants
Prevent the edges of tape, signs, and graphics from peeling by sealing out water and debris.
Pipe Cement for Plastic Pipe
Create strong, leakproof joints between unthreaded pipe and fittings. Cleaner and primer (sold separately) are recommended to prepare pipe for adhesion.
Cement for CPVC plastic and for PVC plastic meets NSF/ANSI 61 safety standards for use on drinking water systems. It is also suitable for drain, waste, and vent pipes.
Cement for ABS plastic is for use in drain, waste, and vent systems.
Cement for ABS, PVC, and CPVC plastic works on most plastic pipe, conduit, water lines, and drain, waste, and vent systems.
For Max. Pipe Dia. | Begins to Harden | Reaches Full Strength | Consistency | Viscosity, cP | Temp. Range, °F | Color | Specifications Met | 8 fl. oz. | 16 fl. oz. | 32 fl. oz. | |
For CPVC Plastic | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
2" | 60 sec. | 12 hrs. | Thin Liquid | 500 | 40° to 110° | Yellow | ASTM F493, NSF/ANSI 61 | 00000000 | |||
6" | 60 sec. | 24 hrs. | Thin Liquid | 500 | 40° to 110° | Orange | ASTM F493, NSF/ANSI 61 | 00000000 | |||
For PVC Plastic | |||||||||||
6" | 60 sec. | 24 hrs. | Thin Liquid | 500 | 40° to 110° | Clear | ASTM D2564, NSF/ANSI 61 | 00000000 | |||
12" | 60 sec. | 24 hrs. | Thick Liquid | 1,600 | 40° to 110° | Clear | ASTM D2564, NSF/ANSI 61 | 00000000 | |||
12" | 60 sec. | 24 hrs. | Thick Liquid | 1,600 | 40° to 110° | Gray | ASTM D2564, NSF/ANSI 61 | 00000000 | |||
For ABS Plastic | |||||||||||
6" | 60 sec. | 24 hrs. | Thin Liquid | 500 | 40° to 110° | Black | ASTM D2235 | 00000000 | |||
For ABS, PVC, and CPVC Plastic | |||||||||||
6" | 60 sec. | 24 hrs. | Thin Liquid | 500 | 40° to 110° | Cream | __ | 00000000 |
Pipe Cement for Corrosive Waste Plastic Pipe
Because this cement won't break down when exposed to corrosive waste, it's often used on plastic pipe fittings in laboratories.
Pipe Dia. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Min. | Max. | Begins to Harden | Reaches Full Strength | Consistency | Viscosity, cP | Temp. Range, °F | Color | Specifications Met | For Use On | Each | |
16 fl. oz. | |||||||||||
1 1/2" | 24" | 60 min. | 2 hrs. | Thick Liquid | 1,600 | 40° to 110° | Yellow | ASTM F2618, ASTM F493, NSF/ANSI 14 | CPVC Plastic | 0000000 | 000000 |
32 fl. oz. | |||||||||||
1 1/2" | 24" | 60 min. | 2 hrs. | Thick Liquid | 1,600 | 40° to 110° | Yellow | ASTM F2618, ASTM F493, NSF/ANSI 14 | CPVC Plastic | 0000000 | 000000 |
Contact Adhesives
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Black adhesive works especially well on foam insulation.
Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
Pliobond Adhesives | |||||||||||||
25 | 8 fl. oz. | Brush-Top Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | __ | 0000000 | 000000 |
35 | 8 fl. oz. | Brush-Top Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 00000 |
Adhesives | |||||||||||||
__ | 4 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 8 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 16 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 16 fl. oz. | Brush-Top Can | 3 min. | 36 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 250° | Black | Foam, Masonry, Metal, Plastic, Rubber | __ | 00000000 | 00000 |
__ | 32 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 00000 |
Primers for Pipe Cement for Plastic Pipe
Water-Resistant Gasket Sealants
In or out of water, this sealant maintains its strength. Gasket sealants seal existing gaskets on metal parts.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Manufacturer Model Number | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Temp. Range, °F | Color | For Use On | Each | |
Loctite® Sealants | |||||||||
MR 5009 | 16 | Brush-Top Can | 1 sec. | 5 min. | -65° to 500° | Red | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 000000 |
MR 5923 | 16 | Brush-Top Can | 4 hrs. | 24 hrs. | -65° to 400° | Red Brown | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 00000 |
Surface-Preparation Cleaners for Pipe Cement for Plastic Pipe
Use these cleaners on PVC, CPVC, and ABS pipe to remove dirt and degrease surfaces.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Type | Size, fl. oz. | Composition | Harshness | For Use On | For Removing | Primary Chemical | Each | |
Liquid | ||||||||
Brush-Top Can | 8 | Solvent Based | Harsh | Plastic, Vinyl | Dirt, Grease/Oil, Wax | Acetone (75-95%) | 00000000 | 00000 |
Brush-Top Can | 16 | Solvent Based | Harsh | Plastic, Vinyl | Dirt, Grease/Oil, Wax | Acetone (75-95%) | 00000000 | 00000 |
Brush-Top Can | 32 | Solvent Based | Harsh | Plastic, Vinyl | Dirt, Grease/Oil, Wax | Acetone (75-95%) | 00000000 | 00000 |