These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

This sealant includes a material certificate with traceable lot number, test report, and product shelf life.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Make tough, flexible, oil-resistant seals.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

The textured finish matches concrete surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.

Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Seal metal-to-metal joints in ductwork.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

Solvents, oils, acids, and other chemicals won't degrade the bond of these adhesives.

To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.

Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.

Install building materials such as wood and drywall with these general purpose adhesives.

Install foam insulation, drywall, and paneling with these adhesives.

Permanently set threaded rods, studs, and rebar in concrete.

These adhesives maintain their strength at temperatures up to 250° F.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

These patching compounds are the most flexible and watertight we offer.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

To eliminate air gaps that can cause heat loss and premature heater failure, mold this putty around heat cable to make direct contact with the pipe.