About Paint and Protective Coatings
More
Touch-Up Plastic Coating Pens for Metal
Seal out moisture on scratched painted metal.
Dry Time | |||||||||
---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Composition | Formulation | Touch, min. | O'all, hrs. | For Use Outdoors | For Use On | Color | Each | |
0.5 | Solvent Based | Acrylic | 30 | 24 | Yes | Steel, Iron | Clear | 0000000 | 000000 |
Wood Stain Pens
Touch-up nicks and scratches on wood.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Composition | Touch, min. | O'all, hrs. | Stroke Wd. | Max. Temp., °F | For Use Outdoors | For Use On | Choose a Color | Each | |
0.3 | Solvent Based | 30 | 1 | 3/16" | 90° | No | Wood | 000000 | 000000 |
Touch-Up Paint Pens for Metal
Touch up small scratches on metal surfaces with these pens.
Black pens have a beveled abrasive tip to remove rust and clean the surface. They have a roller-ball tip for precision paint application and a brush tip for general use. Once the paint dries, use the foam tip to apply the clear coat included in the pen’s base.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Composition | Formulation | Touch | O'all, min. | Max. Temp., °F | For Use Outdoors | For Use On | Color (Appearance) | Each | |
0.3 | Solvent Based | Acrylic Lacquer | 30 sec. | 1 | Not Rated | No | Aluminum, Steel, Iron | White (Gloss) | 00000000 | 000000 |
0.5 | Solvent Based | Lacquer | 20 min. | 30 | 95 | No | Steel, Iron | Black (Flat) | 0000000 | 00000 |
0.5 | Solvent Based | Lacquer | 20 min. | 30 | 95 | No | Steel, Iron | Black (Gloss) | 0000000 | 00000 |
Conductive Surface Fillers for Electronics
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components. Product regulations restrict sales to the listed jurisdictions/areas.
Surface filler in a pen dispenses as a thin, ready-to-use liquid that fills in pitting and small gaps. It’s often used on circuit boards to fix components or to prototype new systems.
Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Container | Temp. Range, °F | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Surface Resistivity, ohms/sq. | Min. | Max. | For Use On | Cannot Be Sold To | Each | |
Surface Fillers | |||||||||||
0.2 | Pen | 3 min. | 60 min. | Not Rated | 0.050 | -65° | 300° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | Outside United States and Canada | 0000000 | 000000 |
Light-Activated Surface Filler Pens
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure. They can be used with most types of metal as well as ceramic, stone, and porcelain.
Formulation | Container Size, fl. oz. | Begins to Harden, sec. | Reaches Full Strength, sec. | Consistency | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Batteries Included | Each | |
Acrylic | 0.2 | 3 | 12 | Gel | Yes | 0° to 245° | Clear | Drill, Sand | Aluminum, Brass, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Ceramic, Porcelain, Stone | Yes | 000000 | 000000 |
Light-Activated Surface Filler Pens for Plastic
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure. Surface fillers work with most kinds of plastic, as well as wood, particleboard, and medium density fiberboard (MDF).
Formulation | Container Size, fl. oz. | Begins to Harden, sec. | Reaches Full Strength, sec. | Consistency | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Batteries Included | Each | |
Acrylic | 0.2 | 3 | 15 | Gel | Yes | 0° to 245° | Clear | Drill, Sand | Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PVDF Plastic, Vinyl Plastic, Fiberglass, Wood | Yes | 0000000 | 000000 |