Filter by
Container Type
Formulation
Color
For Use On
For Use Outdoors
Consistency
Manufacturer Model Name
Manufacturer
Begins to Harden
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Minimum Temperature
REACH
Reaches Full Strength
RoHS
Container Net Weight
Mix Ratio
Mixing Required
Process After Hardening
Clarity
Manufacturer Model Number
Approximate Coverage @ Thickness
Maximum Temperature
Type
Surface Fillers for Plastic
Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
Devcon Flexane 80 Putty can be used with vinyl plastic and rubber.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight | Type | Begins to Harden | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Flexane 80 Putty | |||||||||||||
| 15820 | 1 lbs. | Can | 20 min. | 7 days | Putty | 2.6:1 | 90 sq. in. @ 1/4" | -40° to 180° | Black | Sand | Vinyl Plastic, EPDM Rubber, SBR Rubber | 00000000 | 0000000 |