Capacity Capacity |
|---|
|
Minimum Height Minimum Height |
|---|
Working Orientation Working Orientation |
|---|
|
Maximum Lift Maximum Lift |
|---|
|
|
Maximum Height Maximum Height |
|---|
Base Width Base Width |
|---|
Base Length Base Length |
|---|
Handle Length Handle Length |
|---|
|
|
|
Capacity @ Minimum Height Capacity @ Minimum Height |
|---|
|
Capacity @ Maximum Lift Capacity @ Maximum Lift |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Wheel Configuration Wheel Configuration |
|---|
 | Four Swivel Casters |
 | Two Swivel and Two Rigid Casters |
 | Two Axle- Mounted Wheels |
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Hydraulic Bottle Jacks
Use these versatile jacks for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
Capacity | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | ||
| A | 2 | 4,000 | 6 1/4"-12 1/8" | 5 7/8" | 7/8" | 3 3/4" | 3 3/4" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 4 | 8,000 | 6 1/2"-13 1/4" | 6 1/4" | 1 1/8" | 4" | 4 1/2" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 6 | 12,000 | 8"-16" | 8" | 1 1/4" | 4 1/2" | 4 3/4" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 8 | 16,000 | 7 3/8"-15 1/2" | 7 1/4" | 1 1/2" | 5" | 4 3/4" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 12 | 24,000 | 7"-13" | 5 1/4" | 1 5/8" | 5 1/4" | 5 1/2" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 12 | 24,000 | 8 1/2"-15 3/4" | 7 1/4" | 1 5/8" | 5 1/4" | 5 1/2" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 20 | 40,000 | 7 3/4"-14 1/4" | 6 1/4" | 2 1/4" | 6 1/4" | 6 3/4" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 20 | 40,000 | 9 5/8"-18 1/4" | 8" | 2 1/4" | 6 1/4" | 6 3/4" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 30 | 60,000 | 11"-18 5/8" | 7" | 2 1/4" | 7" | 7" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 50 | 100,000 | 12"-19" | 7" | 3 1/4" | 7" | 8 1/2" | 24" | Steel | Removable Handle | 0000000 | 000000 |
| B | 6 | 12,000 | 8 1/2"-20 1/2" | 12" | 1 3/4" | 4 3/4" | 5 1/4" | 27 5/8" | Steel | Removable Handle | 000000 | 000000 |
| B | 13 | 26,000 | 9 1/8"-22 1/2" | 13 3/8" | 1 7/8" | 7" | 7 3/8" | 27 5/8" | Steel | Removable Handle | 000000 | 000000 |
Heavy Duty Hydraulic Bottle Jacks
With fewer moving parts than standard bottle jacks, these are made for frequent use. The ram body screws onto the base so that it can be opened for inspection and repair. The ram is nickel-plated for corrosion resistance. Jacks can be used for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Wd. | Lg. | Handle Lg. | Body Material | Features | Each | |
| 3 | 6,000 | 8 1/2"-17" | 8 1/2" | 7/8" | 4 1/2" | 5 7/8" | 21" | Steel | Removable Handle | 0000000 | 0000000 |
| 3 | 6,000 | 10 1/4"-20 1/2" | 10 1/4" | 1 1/4" | 4 1/4" | 5 7/8" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 8 5/8"-17 5/8" | 9" | 1 1/4" | 4 3/4" | 6 1/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 10 1/4"-22" | 11 3/4" | 1 3/8" | 4 5/8" | 6 1/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 9 1/8"-19 1/4" | 10 1/8" | 1 3/8" | 5 1/4" | 6 1/2" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 11"-23 1/2" | 12 1/2" | 1 5/8" | 5 1/8" | 6 1/2" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 12 | 24,000 | 9"-19 1/2" | 10 1/2" | 1 5/8" | 5 3/4" | 6 3/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 20 | 40,000 | 11"-17 1/2" | 6 1/2" | 1 7/8" | 6 7/8" | 6 3/4" | 30 3/4" | Steel | Removable Handle | 0000000 | 000000 |
| 30 | 60,000 | 11 1/8"-18 1/8" | 7" | 2 1/8" | 7" | 5 1/2" | 30 3/4" | Steel | Removable Handle | 0000000 | 000000 |
| 60 | 120,000 | 12"-18 5/8" | 6 5/8" | 3 1/8" | 7 1/2" | 9 3/8" | 39 1/2" | Steel | Removable Handle | 000000 | 00000000 |
Low-Profile Hydraulic Bottle Jacks
These jacks have a short body to fit in low-clearance spaces. Jacks with a low-profile handle pump from side to side, requiring less vertical space than other bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Jacks | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Base | Repair Kits | ||||||||||||
| tons | lbs. | Height | Maximum Lift | Ram OD | Dia. | Lg. | Wd. | Handle Length | Body Material | Features | Each | Each | ||
| 5 | 10,000 | 2 1/2"-3 1/4" | 3/4" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 0000000 | 0000000 | 000000 |
| 5 | 10,000 | 3 1/2"-5" | 1 1/2" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 | 0000000 | 00000 |
| 10 | 20,000 | 4 3/4"-6" | 1 3/16" | 1 5/8" | 4 3/8" | __ | __ | 17 3/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 | 0000000 | 00000 |
| 20 | 40,000 | 5 1/8"-6 3/8" | 1 3/16" | 2 1/8" | 4 3/4" | __ | __ | 23 7/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 | 0000000 | 000000 |
| 30 | 60,000 | 7 1/4"-10 1/4" | 3 1/8" | 2 3/8" | __ | 7 5/8" | 5 5/8" | 39 3/8" | Steel | Removable Handle | 0000000 | 000000 | 0000000 | 000000 |
Hydraulic Jacks with Wheels
Roll these jacks from job to job and under hard-to-reach places.
Bracket saddles provide a more secure hold and offer higher lifts than flat saddles. Designed to help mechanics perform maintenance and repair tasks on automotive transmissions, they swivel forward, backward, and side to side, to allow for easy access to all areas of your load.
Flat saddles hold larger loads than the bracket saddles and have a longer handle for more comfortable lifting.
Note: Jacks should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | Base | Wheel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Movement | Dia. | Lg. | Wd. | Wd. | Lg. | Ht. | Handle Lg. | Body Material | Configuration | Material | Each | |
Bracket Saddle | ||||||||||||||||
| 1/2 | 1,000 | 8 1/2"-24 3/4" | 16 1/4" | Swivel | __ | 17" | 9 3/8" | 15" | 31" | 6 1/4" | 22 1/2" | Steel | Four Swivel Casters | Steel | 0000000 | 0000000 |
| 1 | 2,000 | 7 7/8"-33 1/2" | 25 5/8" | Swivel | __ | 17" | 15 1/2" | 19 1/8" | 40 3/8" | 7 1/2" | 22 1/2" | Steel | Four Swivel Casters | Steel | 0000000 | 00000000 |
Flat Saddle | ||||||||||||||||
| 2 | 4,000 | 3 1/2"-18 1/2" | 15" | Rigid | 4 1/2" | __ | __ | 11 3/4" | 25 3/4" | 6" | 45" | Aluminum | Two Swivel and Two Rigid Casters | Steel | 0000000 | 000000 |
| 3 1/2 | 7,000 | 5 1/8"-22 1/8" | 17" | Swivel | 4 3/8" | __ | __ | 15 3/4" | 30 1/8" | 6 7/8" | 52 1/4" | Steel | Two Swivel and Two Rigid Casters | Cast Iron | 0000000 | 000000 |
Two-Height Hydraulic Jacks
These jacks are as versatile as bottle jacks, but with two lifting points—a toe for lifting loads low to the ground, and a saddle for a higher, more stable lifting point.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Lg. | Wd. | Movement | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | |
| 2 | 4,000 | 4 1/2" | 5/8"-5 1/8" | 2" | 2" | 9 1/4"-13 3/4" | 3 1/2" | 2 3/8" | Rigid | 5" | 7" | 11 1/2" | Steel | __ | 0000000 | 0000000 |
| 5 | 10,000 | 4 5/8" | 1"-5 5/8" | 2 1/4" | 3" | 11 1/2"-16 1/8" | 4 3/4" | 3 3/8" | Rigid | 7 1/8" | 10 5/8" | 23 1/2" | Steel | 180° Pivoting Handle | 0000000 | 00000000 |
| 10 | 20,000 | 5 5/8" | 1 1/8"-6 3/4" | 2 3/8" | 3 1/4" | 12 7/8"-18 1/2" | 5 3/4" | 4 5/8" | Rigid | 8 5/8" | 11 1/4" | 23 1/2" | Steel | 180° Pivoting Handle | 0000000 | 00000000 |
Hydraulic Scissor Jacks
Fit these compact jacks under low-height loads. They come with a carrying case.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4 3/4" Min. Ht. | Capacity @ 10 1/4" Max. Lift | Saddle | Base | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Movement | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | |
| 7/8 | 1,750 | 7/8 | 1,750 | 4 3/4"-15" | 10 1/4" | 15 1/2" | Rigid | 1 15/16" | 1 7/16" | 4 5/16" | 4 1/4" | 14 3/4" | Steel | Removable Handle | 00000000 | 0000000 |
Two-Height Ratchet Jacks
Choose between two lifting points—use the toe for lifting loads low to the ground, or use the saddle when you need a higher, more stable lifting point. The saddle is curved to cradle curved loads. Jacks have a ratcheting action that raises or lowers the load one notch at a time. A removable handle can be used at two different positions to get the best angle for lifting.
Aluminum jacks are lighter than iron for easier portability.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Movement | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Handle Material | Each | |
Iron | |||||||||||||||
| 5 | 10,000 | 7" | 1.75"-8.75" | 2 1/2" | 1 1/8" | 14"-21" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 000000000 |
| 5 | 10,000 | 10" | 1.75"-11.75" | 2 1/2" | 1 1/8" | 17"-27" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 5 | 10,000 | 13" | 1.75"-14.75" | 2 1/2" | 1 1/8" | 20"-33" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 10 | 20,000 | 9 1/2" | 1.625"-11.125" | 2 3/8" | 1 1/8" | 17.25"-26.75" | Rigid | 2 5/8" | 2 7/8" | 8 3/4" | 6" | 60" | Steel | 0000000 | 00000000 |
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21.625"-33.625" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
| 15 | 30,000 | 12 3/4" | 2.25"-15" | 2 5/8" | 2 1/4" | 23.25"-36" | Rigid | 2 7/8" | 3 1/2" | 10 1/4" | 8" | 70" | Steel | 0000000 | 00000000 |
| 15 | 30,000 | 18" | 2.25"-20.25" | 2 5/8" | 2 1/4" | 28"-46" | Rigid | 2 7/8" | 3 1/2" | 11" | 8" | 70" | Steel | 0000000 | 00000000 |
Aluminum | |||||||||||||||
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21.625"-33.625" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
Ratchet Jacks
These jacks can be used to lift, spread, push, pull, and clamp. The ratcheting action raises or lowers the load one notch at a time. For clamping, turn the top plate 90° and ratchet the jack to secure your workpiece.
Note: Jacks must be loaded with at least 150 lbs. to safely lower your load one notch at a time. When loaded with less than 150 lbs., the notches are bypassed and the load will drop freely.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Base | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max., tons | Range, lbs. | Max. Clamping Force, lbs. | Ht. | Max. Lift | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Handle Material | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1 1/4 | 150-2,500 | 750 | 4 1/2"-49 3/4" | 45 1/4" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 0000000 |
| 2 1/4 | 150-4,500 | 750 | 4 1/2"-38 5/8" | 34 1/8" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 000000 |
Scissor Jacks
Fit this compact jack under low-height loads.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4" Min. Ht. | Capacity @ 7" Ht. | Capacity @ 9" Max. Ht. | Saddle | Base | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1/8 | 250 | 1/4 | 675 | 1 1/2 | 3,000 | 4"-13" | 9" | 10 1/2" | 2" | 5 1/8" | 4 1/4" | 7 3/8" | 22" | Steel | No | 2 | 3/8" | 0000000 | 000000 |
Air-Powered Hydraulic Bottle Jacks
These jacks use air pressure to raise loads with less effort than other bottle jacks. They can also be operated manually.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | Air Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Lg. | Wd. | Handle Lg. | Air Pressure, psi | Air Hose Lg., ft. | Hose Connection Type | Pipe Size | Gender | Body Material | Features | Each | |
| 12 | 24,000 | 9 1/2"-18 1/2" | 9" | 1 3/4" | 7 7/8" | 6 1/4" | 24" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 0000000 |
| 20 | 40,000 | 9 3/4"-18 3/4" | 9" | 2 1/4" | 8 1/2" | 7 1/8" | 24" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 000000 |
| 30 | 60,000 | 11"-18 1/8" | 7 1/8" | 2 1/2" | 10 1/4" | 8 1/4" | 38 1/8" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 000000 |
Air-Powered Hydraulic Lifting Jacks with Wheels
Roll this jack from job to job and under hard-to-reach places. It uses air pressure to raise loads with less effort than other jacks.
Note: Jacks should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | Base | Air Inlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Type | Movement | Dia. | Lg. | Wd. | Ht. | Handle Lg. | Air Pressure, psi | Air Hose Lg., ft. | Hose Connection Type | Pipe Size | Gender | Body Material | Wheel Material | Each | |
| 22 | 44,000 | 9 3/4"-19 1/4" | 9 1/2" | Flat | Rigid | 2" | 22 7/8" | 12 1/2" | 7" | 48 3/4" | 110-150 | 3 | Quick-Disconnect | 1/4 | Male | Steel | Plastic | 00000000 | 000000000 |