Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Also known as neutral cure, this sealant won't discolor copper, brass, plastic, and concrete.

Make tough, flexible, oil-resistant seals.

Make seals that support glass under heavy loads in equipment and buildings.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

Commonly used in electronics applications, these sheets transfer heat better than any other silicone we offer.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

Seal and cushion narrow spaces such as channels.

The open top allows U-channels to slide over an edge. Use them as seals and trim.

These O-rings withstand temperatures up to 450° F.

These square-profile O-rings have flat edges on all four sides, so they cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections.

Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.

If these O-rings deteriorate, they can be picked up by metal detection systems.

Also known as Boss O-rings, these hard O-rings are for use in tube fittings with a straight-thread connection.

The FEP casing on these O-rings provides the same level of resistance to harsh chemicals as PTFE O-rings, but the core material is soft to make these O-rings more compressible.

Made of Buna-N, these O-rings resist grease, hydraulic oil, and motor oil—plus mild chemicals and water.

These O-rings also resist ethanol and ethylene glycol.

Use this cord stock to create O-rings for high-temperature applications up to 400° F.

Create round-profile O-rings for sealing applications near ovens and other hot areas in your food plant.

The X shape of this cord stock provides four points of contact for a better seal in dynamic applications than round profile. It also requires less compression to make a seal, so it offers a longer service life.

This square-profile cord stock has flat edges on all four sides, which creates a better seal than round profile in static applications, such as hose, pipe, and faucet connections.

This soft cord stock creates a better seal in low-pressure applications that standard neoprene cord stock.

Able to withstand heat up to 450° F, these O-rings maintain a strong seal even when the temperature rises.

All of the O-rings in these assortments are made of Buna-N. They resist animal, vegetable, and motor oils.

These assortments contain a mix of Buna-N O-rings that resist oil and Viton® fluoroelastomer O-rings that resist boric acid, fuels, and transmission fluid.

All of the O-rings in these assortments are Viton® fluoroelastomer and resist isopropyl alcohol, mineral oils, and transmission fluid.

Silicone maintains its flexibility across a wide range of temperatures.

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

Even after extended compression, these sheets and strips will bounce back to shape.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.

These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.

In addition to withstanding temperatures up to 450° F, this silicone gasket material resists water and salts.

Stick these gaskets around door and vent cutouts or replace worn seals to maintain your enclosure's NEMA rating.

Metal additives make these silicone gaskets metal detectable, helping you comply with Hazard Analysis and Critical Control Point (HACCP) programs—use them to prevent leaks in high-temperature food-processing applications.

Made with metal additives, these silicone gaskets create tight seals to prevent leaks in high-temperature food-processing applications. Since they’re metal detectable, they help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety.

These gasket makers come in a tube.

These gasket makers combine oil resistance and the flexibility to accommodate movement.

Create detailed rubber shapes that are ready to use in fifteen minutes or less.

Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.

Also known as dielectric grease, use insulating grease to lubricate and protect electrical systems.

A high silver content gives this grease excellent conductivity for applications where electricity and heat transfer are required.

Thickened with silica, this heavy grease clings to parts so it won't wash off in wet environments.

Apply directly to seals and O-rings to extend service life by preventing drying and cracking.

Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.

For use in food-processing and preparation areas, this grease is NSF registered H1 or meets FDA 21 CFR 178.3570 for incidental contact with food. It's tacky to stick to open gears and roller chain.

Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.

Prevent packages from sticking on conveyor rails and chutes. Made with silicone, use these lubricants to create a slippery dry film that won’t attract dust where metal and non-metal surfaces meet.

Apply these lubricants to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing. They leave a residue, so they shouldn’t be used on parts that need to be painted.

Use these lubricants to release large, intricate, or difficult-to-release parts. Also known as paintable mold-release lubricants, they don’t leave a residue, so you can paint or finish the molded part without the need to clean it. They allow you to easily remove cast parts and prevent sticking, stretching, and tearing.

The hollow construction on these seals provides better compressibility than solid rubber seals. Made of silicone rubber, they also resist water and salts.

Tested in accordance with UL and NFPA standards, these silicone rubber seals are for use on fire-rated doors.

Hollow construction makes these seals more compressible than solid seals.

These hollow seals offer better compressibility than solid seals.

Made of silicone rubber, these seals can handle temperatures up to 500° F, plus they resist water and salts.

Use this tubing in high-temperature applications up to 390° F.

This self-extinguishing tubing meets UL 94V0 and UL 94V1 for flame retardance, so it delays the spread of flames to valuable equipment.

Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.

Silver ions are blended into the walls of this tubing to inhibit the growth of odor-causing microbes.

Route air, liquids, and ingredients around your food processing plants while lowering the risk of contaminating the food. Made of silicone, this tubing has a metal additive that will set off metal detectors to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs.

The highest purity soft tubing we offer, this tubing is bagged in a clean room to prevent dirt and moisture from contaminating the inside. It is cured with platinum and is made with a nonleaching plasticizer that won’t impart tastes or odors to the fluid running through it.

Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.

Made of peroxide-cured silicone, this hose stays strong and flexible across a wide temperature range. Use it with juice, meat, milk, poultry, and syrup.