Search Results
Diameter Diameter |
|---|
Length Length |
|---|
Material Material |
|---|
|
Finish Finish |
|---|
|
For Hole Diameter For Hole Diameter |
|---|
|
Minimum Hardness Minimum Hardness |
|---|
|
Wall Thickness Wall Thickness |
|---|
Specifications Met Specifications Met |
|---|
|
|
Breaking Strength Breaking Strength |
|---|
|
Passivation Passivation |
|---|
|
Container Features Container Features |
|---|
|
Slotted Spring Pins
Also known as roll, tension, split, and expansion pins, these pins have a slot along one side that you squeeze closed to install them into unthreaded holes. Once installed, they expand slightly, creating outward tension that holds them tight against the hole wall. These pins absorb shock and vibration in your system, and keep parts from loosening. They are often used as hinge pins, or to hold springs and power transmission components in place.
Install these pins into a hole slightly smaller than the pin diameter. They have at least one chamfered end, which means the end is angled to make insertion easier.
Breaking strength is measured as double shear, which is the amount of force required to break a pin into three pieces.
Some metric pins with the same diameter come in two different wall thicknesses. Thinner walls are more flexible, easier to install, and won’t weigh down your assembly as much as thicker pins. Layer a pin with a thin wall inside a pin with a thicker wall to increase the breaking strength. Make sure the slots are opposite one another for maximum strength.
Steel pins are strong and wear resistant. Pins with a black-phosphate or zinc-plated finish have an outer layer to protect the steel underneath from rust.
18-8 stainless steel pins offer a balance of strength and corrosion resistance.
316 stainless steel pins have the best corrosion resistance of our stainless steel pins, and are as strong as 18-8 stainless steel pins.
400 series stainless steel pins resist wear from abrasion and have some corrosion resistance.
420 stainless steel pins are as strong and wear resistant as steel, with the addition of corrosion resistance in wet environments.
Passivated pins offer added protection against corrosion and oxidation.
Pins that meet ASME B18.8.2 specifications are made to ASME standards for material and dimensions.
Pins that meet MS16562 conform to military standards for material and dimensions.
Pins that meet specifications for ISO 8752 (formerly DIN 1481) or ISO 13337 (formerly DIN 7346) adhere to international standards for pin dimensions.
For technical drawings and 3-D models, click on a part number.
1050-1095 Spring Steel
End View
| Lg. | For Hole Dia. | Wall Thick. | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/16" Dia. | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 1/4" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 500 | 000000000 | 0000 |
| 5/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 500 | 000000000 | 0000 |
| 3/8" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 500 | 000000000 | 0000 |
| 7/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 500 | 000000000 | 0000 |
| 1/2" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 9/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 5/8" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 11/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 3/4" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 13/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 15/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 100 | 000000000 | 0000 |
5/64" Dia. | ||||||||
| 3/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 1/4" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 5/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 3/8" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 7/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 1/2" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 9/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 5/8" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 11/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 3/4" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 13/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 7/8" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 1" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 1 1/4" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 1/2" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
3/32" Dia. | ||||||||
| 3/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 1/4" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 500 | 000000000 | 0000 |
| 5/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 500 | 000000000 | 0000 |
| 3/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 7/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 500 | 000000000 | 0000 |
| 1/2" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 9/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 5/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 11/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 3/4" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 13/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 7/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 15/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 1 1/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 1 1/4" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 3/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 1/2" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
1/8" Dia. | ||||||||
| 1/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 5/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 3/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 7/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 1/2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 9/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 5/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 11/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 3/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 13/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 7/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 15/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 1 1/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 1/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 3/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 1/2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 5/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 7/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 2 1/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 1/2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
9/64" Dia. | ||||||||
| 1/2" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3/4" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/2" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | ASME B18.8.2 | 50 | 000000000 | 0000 |
5/32" Dia. | ||||||||
| 3/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/4" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/2" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/4" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 2" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 2 1/2" | 0.157"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 00000 |
3/16" Dia. | ||||||||
| 3/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1/2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 9/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 5/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 11/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 13/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 7/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 1/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 5/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 7/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 2 1/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 2 1/2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 2 3/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 50 | 000000000 | 0000 |
7/32" Dia. | ||||||||
| 1/2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 3/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 2 1/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2 1/2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2 3/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 00000 |
1/4" Dia. | ||||||||
| 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 11/16" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 3/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 3/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 5/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 3/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 7/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2 1/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2 3/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3 1/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 5 | 000000000 | 0000 |
5/16" Dia. | ||||||||
| 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2 1/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2 1/2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 3" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 3 1/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 3 1/2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 3 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 00000 |
3/8" Dia. | ||||||||
| 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 1/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 1/2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3 1/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 3 1/2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
7/16" Dia. | ||||||||
| 1 3/4" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 2" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 4" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
1/2" Dia. | ||||||||
| 1 1/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 3/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 3/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3 1/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3 1/2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3 3/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
5/8" Dia. | ||||||||
| 3" | 0.625"-0.636" | 1/8" | Rockwell C43 | 46,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 4" | 0.625"-0.636" | 1/8" | Rockwell C43 | 46,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
Black-Phosphate 1050-1095 Spring Steel
End View
| Lg. | For Hole Dia. | Wall Thick. | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/16" Dia. | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4" | 0.062"-0.065" | 0.012" | Rockwell C46 | 400 | MS16562-96 | 50 | 000000000 | 00000 |
| 3/8" | 0.062"-0.065" | 0.012" | Rockwell C46 | 400 | MS16562-98 | 50 | 000000000 | 0000 |
3/32" Dia. | ||||||||
| 1/2" | 0.094"-0.097" | 0.022" | Rockwell C46 | 1,000 | MS16562-119 | 50 | 000000000 | 00000 |
| 3/4" | 0.094"-0.097" | 0.022" | Rockwell C46 | 1,000 | MS16562-122 | 50 | 000000000 | 00000 |
1/8" Dia. | ||||||||
| 1/2" | 0.125"-0.129" | 0.028" | Rockwell C46 | 2,100 | MS16562-127 | 25 | 000000000 | 0000 |
| 5/8" | 0.125"-0.129" | 0.028" | Rockwell C46 | 2,100 | MS16562-129 | 25 | 000000000 | 0000 |
| 3/4" | 0.125"-0.129" | 0.028" | Rockwell C46 | 2,100 | MS16562-130 | 25 | 000000000 | 0000 |
| 1" | 0.125"-0.129" | 0.028" | Rockwell C46 | 2,100 | MS16562-132 | 25 | 000000000 | 0000 |
3/16" Dia. | ||||||||
| 3/4" | 0.187"-0.192" | 0.04" | Rockwell C46 | 4,400 | MS16562-142 | 25 | 000000000 | 00000 |
| 1" | 0.187"-0.192" | 0.04" | Rockwell C46 | 4,400 | MS16562-144 | 25 | 000000000 | 00000 |
1/4" Dia. | ||||||||
| 3/4" | 0.25"-0.256" | 0.048" | Rockwell C46 | 7,700 | MS16562-156 | 10 | 000000000 | 0000 |
| 7/8" | 0.25"-0.256" | 0.048" | Rockwell C46 | 7,700 | MS16562-157 | 10 | 000000000 | 0000 |
| 1" | 0.25"-0.256" | 0.048" | Rockwell C46 | 7,700 | MS16562-158 | 10 | 000000000 | 00000 |
| 1 1/4" | 0.25"-0.256" | 0.048" | Rockwell C46 | 7,700 | MS16562-159 | 10 | 000000000 | 00000 |
| 1 1/2" | 0.25"-0.256" | 0.048" | Rockwell C46 | 7,700 | MS16562-160 | 10 | 000000000 | 00000 |
| 2" | 0.25"-0.256" | 0.048" | Rockwell C46 | 7,700 | MS16562-162 | 10 | 000000000 | 00000 |
3/8" Dia. | ||||||||
| 1" | 0.375"-0.382" | 0.077" | Rockwell C46 | 17,600 | MS16562-171 | 5 | 000000000 | 00000 |
| 1 1/2" | 0.375"-0.382" | 0.077" | Rockwell C46 | 17,600 | MS16562-173 | 5 | 000000000 | 00000 |
| 2" | 0.375"-0.382" | 0.077" | Rockwell C46 | 17,600 | MS16562-175 | 5 | 000000000 | 00000 |
1/2" Dia. | ||||||||
| 1 1/2" | 0.5"-0.51" | 0.094" | Rockwell C46 | 25,500 | MS16562-184 | 1 | 000000000 | 0000 |
| 2" | 0.5"-0.51" | 0.094" | Rockwell C46 | 25,500 | MS16562-186 | 1 | 000000000 | 0000 |
| 3" | 0.5"-0.51" | 0.094" | Rockwell C46 | 25,500 | MS16562-188 | 1 | 000000000 | 0000 |
Zinc-Plated 1050-1095 Spring Steel
End View
| Lg. | For Hole Dia. | Wall Thick. | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/16" Dia. | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 500 | 000000000 | 000000 |
| 1/4" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 5/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 3/8" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 7/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 1/2" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 9/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 5/8" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 11/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 3/4" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 13/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 15/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | ASME B18.8.2 | 100 | 000000000 | 0000 |
5/64" Dia. | ||||||||
| 3/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1/4" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 5/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 3/8" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 7/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1/2" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 9/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 5/8" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 11/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 3/4" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 13/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 7/8" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 1/4" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 1/2" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
3/32" Dia. | ||||||||
| 3/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1/4" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 5/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 3/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 500 | 000000000 | 00000 |
| 7/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 1/2" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 9/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 5/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 11/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 3/4" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 13/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 7/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 15/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 1/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 1/4" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/2" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
1/8" Dia. | ||||||||
| 1/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 5/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 3/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 7/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1/2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 9/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 5/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 11/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 3/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 0000 |
| 13/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 7/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 15/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 1 1/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 5/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 7/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 2 1/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
9/64" Dia. | ||||||||
| 1/2" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 3/4" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1 1/2" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | ASME B18.8.2 | 50 | 000000000 | 00000 |
5/32" Dia. | ||||||||
| 3/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/4" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/2" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 3/4" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 2" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 2 1/2" | 0.157"-0.16" | 0.032" | Rockwell C43 | 2,700 | ASME B18.8.2 | 50 | 000000000 | 0000 |
3/16" Dia. | ||||||||
| 3/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 9/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 11/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 250 | 000000000 | 00000 |
| 13/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 5/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 3/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 7/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 2 1/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2 1/2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2 3/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 3" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | ASME B18.8.2 | 50 | 000000000 | 00000 |
7/32" Dia. | ||||||||
| 1/2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 5/8" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 3/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1 3/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2 1/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2 1/2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 2 3/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | ASME B18.8.2 | 25 | 000000000 | 00000 |
1/4" Dia. | ||||||||
| 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 9/16" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 5/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 11/16" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 3/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 3/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 5/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 3/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 7/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2 1/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2 3/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 3 1/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 3 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | ASME B18.8.2 | 5 | 000000000 | 0000 |
5/16" Dia. | ||||||||
| 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 1/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 1/2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 3" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 3 1/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3 1/2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
3/8" Dia. | ||||||||
| 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 1/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3 1/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3 1/2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | ASME B18.8.2 | 10 | 000000000 | 0000 |
7/16" Dia. | ||||||||
| 1 3/4" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 4" | 0.438"-0.445" | 0.077" | Rockwell C43 | 19,800 | ASME B18.8.2 | 10 | 000000000 | 00000 |
1/2" Dia. | ||||||||
| 1 1/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 1/2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 3/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 2 1/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 2 3/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3 1/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3 1/2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3 3/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | ASME B18.8.2 | 5 | 000000000 | 0000 |
18-8 Stainless Steel
End View
| Lg. | For Hole Dia. | Wall Thick. | Min. Hardness | Breaking Strength, lbs. | Passivation | Specifications Met | Pkg. Qty. | Pkg. | |
1/16" Dia. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/16" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1/4" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/16" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/8" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 11/16" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 13/16" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 7/8" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 15/16" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1" | 0.062"-0.065" | 0.012" | Not Rated | 250 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
5/64" Dia. | |||||||||
| 3/16" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/4" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/16" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/8" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 11/16" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 13/16" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/4" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/2" | 0.078"-0.081" | 0.018" | Not Rated | 450 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
3/32" Dia. | |||||||||
| 3/16" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/4" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/16" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/8" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 11/16" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 13/16" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 15/16" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/8" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/4" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 3/8" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/2" | 0.094"-0.097" | 0.022" | Not Rated | 650 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
1/8" Dia. | |||||||||
| 1/4" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/16" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/8" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 11/16" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 13/16" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 7/8" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 15/16" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/8" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/4" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 3/8" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/2" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 5/8" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1 3/4" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 7/8" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 1/4" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 1/2" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
9/64" Dia. | |||||||||
| 1/2" | 0.14"-0.144" | 0.028" | Not Rated | 1,200 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 3/4" | 0.14"-0.144" | 0.028" | Not Rated | 1,200 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1" | 0.14"-0.144" | 0.028" | Not Rated | 1,200 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
5/32" Dia. | |||||||||
| 3/8" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 7/16" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 5/8" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/8" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/4" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 3/8" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 3/4" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 1/2" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
3/16" Dia. | |||||||||
| 3/8" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 7/16" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1/2" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 9/16" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 11/16" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3/4" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 13/16" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 7/8" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1 1/8" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1 1/4" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 3/8" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 5/8" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 3/4" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 7/8" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 1/4" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 1/2" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 3/4" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
7/32" Dia. | |||||||||
| 1/2" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 3/4" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 3/4" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 1/4" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 3/4" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3" | 0.219"-0.224" | 0.048" | Not Rated | 3,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
1/4" Dia. | |||||||||
| 3/8" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1/2" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 9/16" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 11/16" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 3/4" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 7/8" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1 1/8" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/4" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 3/8" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 5/8" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 3/4" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 7/8" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/4" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 3/4" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3 1/4" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3 1/2" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 4" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Not Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
5/16" Dia. | |||||||||
| 3/4" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Not Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 1/2" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 3/4" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 2 1/4" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2 1/2" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 2 3/4" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3 1/4" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 3 1/2" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 3/4" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 4" | 0.312"-0.318" | 0.062" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
3/8" Dia. | |||||||||
| 3/4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 1" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 1/4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 1/2" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 3/4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Not Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Not Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 2 1/4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2 1/2" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2 3/4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 3" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 3 1/4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 1/2" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 3/4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
7/16" Dia. | |||||||||
| 1 3/4" | 0.437"-0.445" | 0.077" | Not Rated | 11,500 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2" | 0.437"-0.445" | 0.077" | Not Rated | 11,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/2" | 0.437"-0.445" | 0.077" | Not Rated | 11,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3" | 0.437"-0.445" | 0.077" | Not Rated | 11,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 4" | 0.437"-0.445" | 0.077" | Not Rated | 11,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
1/2" Dia. | |||||||||
| 1 1/4" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 1 1/2" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 3/4" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/4" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/2" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 3/4" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 1/4" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 1/2" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 3/4" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 4" | 0.5"-0.51" | 0.094" | Not Rated | 15,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
316 Stainless Steel
End View
| Lg. | For Hole Dia. | Wall Thick. | Min. Hardness | Breaking Strength, lbs. | Passivation | Specifications Met | Pkg. Qty. | Pkg. | |
1/16" Dia. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4" | 0.062"-0.065" | 0.012" | Not Rated | 200 | Passivated | ASME B18.8.2 | 100 | 000000000 | 000000 |
| 5/16" | 0.062"-0.065" | 0.012" | Not Rated | 200 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 3/8" | 0.062"-0.065" | 0.012" | Not Rated | 200 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1/2" | 0.062"-0.065" | 0.012" | Not Rated | 200 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 5/8" | 0.062"-0.065" | 0.012" | Not Rated | 200 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 3/4" | 0.062"-0.065" | 0.012" | Not Rated | 200 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1" | 0.062"-0.065" | 0.012" | Not Rated | 200 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
3/32" Dia. | |||||||||
| 1/4" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 5/16" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 3/8" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 7/16" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1/2" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 3/4" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 7/8" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/4" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.094"-0.097" | 0.022" | Not Rated | 600 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
1/8" Dia. | |||||||||
| 3/8" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 7/16" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1/2" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 3/4" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 7/8" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/4" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 3/4" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2" | 0.125"-0.129" | 0.028" | Not Rated | 1,000 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
5/32" Dia. | |||||||||
| 1/2" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 5/8" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 3/4" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 7/8" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/4" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 3/4" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2" | 0.156"-0.16" | 0.032" | Not Rated | 1,600 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
3/16" Dia. | |||||||||
| 1/2" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 5/8" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 3/4" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 7/8" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 1/4" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 1/2" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 3/4" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2" | 0.187"-0.192" | 0.04" | Not Rated | 2,400 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
1/4" Dia. | |||||||||
| 5/8" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3/4" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 7/8" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 1/4" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 1/2" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2 1/2" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 3" | 0.25"-0.256" | 0.048" | Not Rated | 4,100 | Passivated | ASME B18.8.2 | 5 | 000000000 | 00000 |
5/16" Dia. | |||||||||
| 1" | 0.312"-0.318" | 0.063" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 1 1/4" | 0.312"-0.318" | 0.063" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 1 1/2" | 0.312"-0.318" | 0.063" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2" | 0.312"-0.318" | 0.063" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 2 1/2" | 0.312"-0.318" | 0.063" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 3" | 0.312"-0.318" | 0.063" | Not Rated | 6,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 00000 |
3/8" Dia. | |||||||||
| 3/4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 1/4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 1/2" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 3/4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/2" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 4" | 0.375"-0.382" | 0.077" | Not Rated | 9,500 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
400 Series Stainless Steel
End View
| Lg. | For Hole Dia. | Wall Thick. | Min. Hardness | Breaking Strength, lbs. | Passivation | Specifications Met | Pkg. Qty. | Pkg. | |
1/16" Dia. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4" | 0.062"-0.065" | 0.012" | Rockwell C43 | 400 | Passivated | MS16562-190 | 5 | 000000000 | 00000 |
| 3/8" | 0.062"-0.065" | 0.012" | Rockwell C43 | 400 | Passivated | MS16562-192 | 5 | 000000000 | 0000 |
| 1/2" | 0.062"-0.065" | 0.012" | Rockwell C43 | 400 | Passivated | MS16562-194 | 5 | 000000000 | 0000 |
1/8" Dia. | |||||||||
| 3/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 2,100 | Passivated | MS16562-219 | 25 | 000000000 | 0000 |
| 1/2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 2,100 | Passivated | MS16562-221 | 25 | 000000000 | 0000 |
| 3/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 2,100 | Passivated | MS16562-224 | 25 | 000000000 | 0000 |
| 1" | 0.125"-0.129" | 0.028" | Rockwell C43 | 2,100 | Passivated | MS16562-226 | 25 | 000000000 | 00000 |
3/16" Dia. | |||||||||
| 3/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,400 | Passivated | MS16562-236 | 10 | 000000000 | 0000 |
| 1" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,400 | Passivated | MS16562-238 | 10 | 000000000 | 0000 |
| 1 1/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,400 | Passivated | MS16562-239 | 10 | 000000000 | 0000 |
1/4" Dia. | |||||||||
| 3/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,700 | Passivated | MS16562-250 | 5 | 000000000 | 0000 |
| 1" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,700 | Passivated | MS16562-252 | 5 | 000000000 | 0000 |
| 1 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,700 | Passivated | MS16562-254 | 5 | 000000000 | 0000 |
1/2" Dia. | |||||||||
| 2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 25,500 | Passivated | MS16562-280 | 1 | 000000000 | 0000 |
| 3" | 0.5"-0.51" | 0.094" | Rockwell C43 | 25,500 | Passivated | MS16562-282 | 1 | 000000000 | 0000 |
420 Stainless Steel
End View
| Lg. | For Hole Dia. | Wall Thick. | Min. Hardness | Breaking Strength, lbs. | Passivation | Specifications Met | Pkg. Qty. | Pkg. | |
1/16" Dia. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1/4" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/8" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 5/8" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 11/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 3/4" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 13/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 15/16" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.062"-0.065" | 0.012" | Rockwell C43 | 430 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
5/64" Dia. | |||||||||
| 3/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/4" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/8" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 7/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1/2" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 9/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 11/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 3/4" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 13/16" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 7/8" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/4" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1 1/2" | 0.078"-0.081" | 0.018" | Rockwell C43 | 800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
3/32" Dia. | |||||||||
| 3/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/4" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 11/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 3/4" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 13/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 7/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 15/16" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/4" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 3/8" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/2" | 0.094"-0.097" | 0.022" | Rockwell C43 | 1,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
1/8" Dia. | |||||||||
| 1/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 1/2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 9/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 11/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 3/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 13/16" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 7/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 15/16" | 0.125"-0.129" | 0.028" | Rockwell C46 | 1,800 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1 1/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 3/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 5/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 3/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 7/8" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 1/4" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 1/2" | 0.125"-0.129" | 0.028" | Rockwell C43 | 1,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
9/64" Dia. | |||||||||
| 1/2" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3/4" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.14"-0.144" | 0.028" | Rockwell C43 | 2,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
5/32" Dia. | |||||||||
| 3/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 7/16" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1/2" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 9/16" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 100 | 000000000 | 0000 |
| 5/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 3/4" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 7/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 1" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/4" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 3/8" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 3/4" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 1/2" | 0.156"-0.16" | 0.032" | Rockwell C43 | 2,700 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
3/16" Dia. | |||||||||
| 3/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 7/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1/2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 9/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 11/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 3/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 13/16" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 7/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 1 1/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1 3/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1 1/2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 5/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 3/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 7/8" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 1/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 1/2" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2 3/4" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 3" | 0.187"-0.192" | 0.04" | Rockwell C43 | 4,100 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
7/32" Dia. | |||||||||
| 1/2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Not Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 3/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 3/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2 1/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 3/4" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3" | 0.219"-0.224" | 0.048" | Rockwell C43 | 5,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
1/4" Dia. | |||||||||
| 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Not Passivated | ASME B18.8.2 | 100 | 000000000 | 00000 |
| 9/16" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 5/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 0000 |
| 11/16" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 3/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 7/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 50 | 000000000 | 00000 |
| 1" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 3/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 5/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 3/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 7/8" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 3/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 3 1/4" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3 1/2" | 0.25"-0.256" | 0.048" | Rockwell C43 | 7,000 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 4" | 0.25"-0.256" | 0.048" | Rockwell C46 | 7,000 | Not Passivated | ASME B18.8.2 | 5 | 000000000 | 00000 |
5/16" Dia. | |||||||||
| 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 1" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 1/2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 2 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 3 1/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 3 1/2" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 3 3/4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 4" | 0.312"-0.318" | 0.062" | Rockwell C43 | 10,800 | Passivated | ASME B18.8.2 | 5 | 000000000 | 00000 |
3/8" Dia. | |||||||||
| 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 1/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 10 | 000000000 | 0000 |
| 1 1/2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2 1/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2 1/2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 3" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 3 1/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 1/2" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 3/4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 4" | 0.375"-0.382" | 0.077" | Rockwell C43 | 16,300 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
7/16" Dia. | |||||||||
| 1 3/4" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2 1/2" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 3" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | Passivated | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 4" | 0.437"-0.445" | 0.077" | Rockwell C43 | 19,800 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
1/2" Dia. | |||||||||
| 1 1/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 1 1/2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 1 3/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Passivated | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Not Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 3/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Not Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 1/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Not Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 1/2" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 3/4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Not Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 4" | 0.5"-0.51" | 0.094" | Rockwell C43 | 27,000 | Passivated | ASME B18.8.2 | 1 | 000000000 | 0000 |
Metric 1050-1095 Spring Steel
End View
| Lg., mm | For Hole Dia., mm | Wall Thick., mm | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1 mm Dia. | ||||||||
|---|---|---|---|---|---|---|---|---|
| 4 | 1 | 0.2 | Rockwell C42 | 150 | DIN 1481, ISO 8752 | 100 | 000000000 | 000000 |
| 6 | 1 | 0.2 | Rockwell C42 | 150 | ISO 8752 | 100 | 000000000 | 0000 |
| 8 | 1 | 0.2 | Rockwell C42 | 150 | ISO 8752 | 100 | 000000000 | 0000 |
1.5 mm Dia. | ||||||||
| 4 | 1.5-1.6 | 0.3 | Rockwell C42 | 350 | DIN 1481, ISO 8752 | 100 | 000000000 | 00000 |
| 5 | 1.5-1.6 | 0.3 | Rockwell C42 | 350 | DIN 1481, ISO 8752 | 100 | 000000000 | 0000 |
| 6 | 1.5-1.6 | 0.3 | Rockwell C42 | 350 | DIN 1481, ISO 8752 | 100 | 000000000 | 0000 |
| 8 | 1.5-1.6 | 0.3 | Rockwell C42 | 350 | DIN 1481, ISO 8752 | 100 | 000000000 | 0000 |
| 10 | 1.5-1.6 | 0.3 | Rockwell C42 | 350 | ISO 8752 | 100 | 000000000 | 0000 |
| 12 | 1.5-1.6 | 0.3 | Rockwell C42 | 350 | DIN 1481, ISO 8752 | 100 | 000000000 | 0000 |
2 mm Dia. | ||||||||
| 4 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 4 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 200 | 000000000 | 0000 |
| 5 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 5 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 200 | 000000000 | 0000 |
| 6 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 100 | 000000000 | 0000 |
| 6 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 200 | 000000000 | 00000 |
| 8 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 8 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 200 | 000000000 | 00000 |
| 10 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 100 | 000000000 | 0000 |
| 10 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 200 | 000000000 | 00000 |
| 12 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 12 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 200 | 000000000 | 00000 |
| 14 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 100 | 000000000 | 0000 |
| 14 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 200 | 000000000 | 00000 |
| 16 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 100 | 000000000 | 0000 |
| 16 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 200 | 000000000 | 00000 |
| 18 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 18 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 200 | 000000000 | 00000 |
| 20 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 100 | 000000000 | 0000 |
| 20 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 100 | 000000000 | 0000 |
| 22 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 22 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 100 | 000000000 | 0000 |
| 24 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 24 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 100 | 000000000 | 0000 |
| 30 | 2 | 0.2 | Rockwell C42 | 330 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 30 | 2-2.1 | 0.4 | Rockwell C42 | 600 | ISO 8752 | 100 | 000000000 | 0000 |
2.5 mm Dia. | ||||||||
| 5 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 6 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 100 | 000000000 | 0000 |
| 8 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 100 | 000000000 | 0000 |
| 10 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 10 | 2.5-2.6 | 0.5 | Rockwell C42 | 950 | DIN 1481, ISO 8752 | 100 | 000000000 | 0000 |
| 12 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 100 | 000000000 | 0000 |
| 14 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 14 | 2.5-2.6 | 0.5 | Rockwell C42 | 950 | ISO 8752 | 100 | 000000000 | 0000 |
| 16 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 18 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 20 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 20 | 2.5-2.6 | 0.5 | Rockwell C42 | 950 | ISO 8752 | 100 | 000000000 | 0000 |
| 24 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 24 | 2.5-2.6 | 0.5 | Rockwell C42 | 950 | ISO 8752 | 100 | 000000000 | 0000 |
| 26 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 30 | 2.5 | 0.25 | Rockwell C42 | 530 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 30 | 2.5-2.6 | 0.5 | Rockwell C42 | 950 | ISO 8752 | 100 | 000000000 | 00000 |
3 mm Dia. | ||||||||
| 4 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 4 | 3-3.65 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 200 | 000000000 | 0000 |
| 5 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 6 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 100 | 000000000 | 0000 |
| 6 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 200 | 000000000 | 00000 |
| 8 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 100 | 000000000 | 0000 |
| 8 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 200 | 000000000 | 00000 |
| 10 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 10 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 200 | 000000000 | 0000 |
| 12 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 12 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 200 | 000000000 | 0000 |
| 14 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 14 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 200 | 000000000 | 00000 |
| 16 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 16 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 200 | 000000000 | 00000 |
| 18 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 18 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 200 | 000000000 | 00000 |
| 20 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 200 | 000000000 | 00000 |
| 22 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 22 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 100 | 000000000 | 0000 |
| 24 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 24 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 100 | 000000000 | 0000 |
| 26 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 26 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 100 | 000000000 | 0000 |
| 28 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 28 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 100 | 000000000 | 0000 |
| 30 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 30 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 100 | 000000000 | 0000 |
| 32 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 36 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 36 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | DIN 1481, ISO 8752 | 100 | 000000000 | 0000 |
| 40 | 3 | 0.3 | Rockwell C42 | 780 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 40 | 3-3.1 | 0.6 | Rockwell C42 | 1,400 | ISO 8752 | 100 | 000000000 | 0000 |
3.5 mm Dia. | ||||||||
| 10 | 3.5-3.65 | 0.8 | Rockwell C42 | 2,000 | ISO 8752 | 100 | 000000000 | 0000 |
| 20 | 3.5-3.65 | 0.8 | Rockwell C42 | 2,000 | ISO 8752 | 100 | 000000000 | 0000 |
| 30 | 3.5-3.65 | 0.8 | Rockwell C42 | 2,000 | ISO 8752 | 100 | 000000000 | 0000 |
4 mm Dia. | ||||||||
| 6 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 100 | 000000000 | 00000 |
| 6 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 8 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 8 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 10 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 10 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 12 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 12 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 14 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 14 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 16 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 16 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 18 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 18 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 20 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 20 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 22 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 22 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 24 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 24 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 26 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 26 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 28 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 30 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 30 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 32 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 32 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 36 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 36 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 40 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 40 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 0000 |
| 45 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 45 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 100 | 000000000 | 00000 |
| 50 | 4 | 0.5 | Rockwell C42 | 1,700 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 50 | 4-4.2 | 0.8 | Rockwell C42 | 2,500 | ISO 8752 | 50 | 000000000 | 0000 |
5 mm Dia. | ||||||||
| 5 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 6 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 8 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 10 | 5-5.2 | 1 | Rockwell C42 | 3,900 | DIN 1481, ISO 8752 | 100 | 000000000 | 0000 |
| 12 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 12 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 0000 |
| 14 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 14 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 0000 |
| 16 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 16 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 0000 |
| 18 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 0000 |
| 18 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 0000 |
| 20 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 20 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 0000 |
| 22 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 22 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 0000 |
| 24 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 24 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 0000 |
| 26 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 26 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 0000 |
| 28 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 28 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 00000 |
| 30 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 30 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 00000 |
| 32 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 32 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 00000 |
| 36 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 36 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 00000 |
| 40 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 40 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 00000 |
| 45 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 45 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 100 | 000000000 | 00000 |
| 50 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 50 | 5-5.2 | 1 | Rockwell C42 | 3,900 | ISO 8752 | 50 | 000000000 | 0000 |
| 60 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 70 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 80 | 5 | 0.5 | Rockwell C42 | 2,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
6 mm Dia. | ||||||||
| 10 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 12 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 12 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 100 | 000000000 | 0000 |
| 14 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 14 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 100 | 000000000 | 0000 |
| 16 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 16 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 100 | 000000000 | 0000 |
| 18 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 50 | 000000000 | 00000 |
| 20 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 20 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 100 | 000000000 | 00000 |
| 22 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 24 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 24 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 100 | 000000000 | 00000 |
| 26 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 26 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 100 | 000000000 | 00000 |
| 28 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 30 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 30 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 50 | 000000000 | 0000 |
| 32 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 36 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 36 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 50 | 000000000 | 0000 |
| 40 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 40 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 50 | 000000000 | 0000 |
| 45 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 45 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 50 | 000000000 | 00000 |
| 50 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 50 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 50 | 000000000 | 00000 |
| 55 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 60 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 60 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | ISO 8752 | 25 | 000000000 | 0000 |
| 70 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 80 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 100 | 6 | 0.75 | Rockwell C42 | 4,000 | DIN 7346, ISO 13337 | 10 | 000000000 | 00000 |
| 100 | 6-6.2 | 1.2 | Rockwell C42 | 5,800 | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
8 mm Dia. | ||||||||
| 10 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 12 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 14 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 16 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 0000 |
| 18 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 20 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 22 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 22 | 8-8.25 | 1.5 | Rockwell C42 | 9,600 | ISO 8752 | 50 | 000000000 | 0000 |
| 24 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 26 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 26 | 8-8.25 | 1.5 | Rockwell C42 | 9,600 | ISO 8752 | 50 | 000000000 | 00000 |
| 28 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 25 | 000000000 | 00000 |
| 30 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 30 | 8-8.25 | 1.5 | Rockwell C42 | 9,600 | ISO 8752 | 50 | 000000000 | 00000 |
| 32 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 36 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 40 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 40 | 8-8.25 | 1.5 | Rockwell C42 | 9,600 | ISO 8752 | 50 | 000000000 | 00000 |
| 45 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 50 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 50 | 8-8.25 | 1.5 | Rockwell C42 | 9,600 | ISO 8752 | 25 | 000000000 | 0000 |
| 55 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 55 | 8-8.25 | 1.5 | Rockwell C42 | 9,600 | ISO 8752 | 25 | 000000000 | 0000 |
| 60 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 60 | 8-8.25 | 1.5 | Rockwell C42 | 9,600 | ISO 8752 | 25 | 000000000 | 00000 |
| 65 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 70 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 00000 |
| 80 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 00000 |
| 100 | 8 | 0.75 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 100 | 8-8.25 | 1.5 | Rockwell C42 | 9,600 | DIN 1481, ISO 8752 | 5 | 000000000 | 0000 |
10 mm Dia. | ||||||||
| 10 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 12 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 14 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 16 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 20 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 22 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 24 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 24 | 10-10.3 | 2 | Rockwell C42 | 15,700 | ISO 8752 | 25 | 000000000 | 0000 |
| 26 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 30 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 30 | 10-10.3 | 2 | Rockwell C42 | 15,700 | ISO 8752 | 25 | 000000000 | 0000 |
| 36 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 36 | 10-10.3 | 2 | Rockwell C42 | 15,700 | ISO 8752 | 25 | 000000000 | 00000 |
| 40 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 00000 |
| 40 | 10-10.3 | 2 | Rockwell C42 | 15,700 | ISO 8752 | 25 | 000000000 | 00000 |
| 45 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 10 | 000000000 | 00000 |
| 50 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 50 | 10-10.3 | 2 | Rockwell C42 | 15,700 | ISO 8752 | 25 | 000000000 | 00000 |
| 60 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 60 | 10-10.3 | 2 | Rockwell C42 | 15,700 | ISO 8752 | 10 | 000000000 | 0000 |
| 70 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 80 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 80 | 10-10.3 | 2 | Rockwell C42 | 15,700 | ISO 8752 | 10 | 000000000 | 00000 |
| 90 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 100 | 10 | 1 | Rockwell C42 | 5,300 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 100 | 10-10.3 | 2 | Rockwell C42 | 15,700 | DIN 1481, ISO 8752 | 5 | 000000000 | 0000 |
12 mm Dia. | ||||||||
| 10 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 16 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 10 | 000000000 | 0000 |
| 20 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 10 | 000000000 | 00000 |
| 24 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 10 | 000000000 | 00000 |
| 26 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 28 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 30 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 30 | 12-12.3 | 2.5 | Rockwell C42 | 23,000 | ISO 8752 | 5 | 000000000 | 0000 |
| 32 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 36 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 40 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 40 | 12-12.3 | 2.5 | Rockwell C42 | 23,000 | ISO 8752 | 10 | 000000000 | 00000 |
| 45 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 50 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 50 | 12-12.3 | 2.5 | Rockwell C42 | 23,000 | ISO 8752 | 5 | 000000000 | 0000 |
| 55 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 60 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 60 | 12-12.3 | 2.5 | Rockwell C42 | 23,000 | ISO 8752 | 5 | 000000000 | 0000 |
| 65 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 70 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 80 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 100 | 12 | 1 | Rockwell C42 | 10,700 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
13 mm Dia. | ||||||||
| 10 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 12 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 14 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 16 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 20 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 22 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 24 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 26 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 28 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 30 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 36 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 40 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 50 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 70 | 13 | 1.2 | Rockwell C42 | 14,800 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
16 mm Dia. | ||||||||
| 10 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 10 | 000000000 | 00000 |
| 12 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 5 | 000000000 | 0000 |
| 14 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 16 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 18 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 20 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 22 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 24 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 26 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 28 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 5 | 000000000 | 00000 |
| 30 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 32 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 36 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 40 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 45 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 50 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 55 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 60 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 70 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 120 | 16 | 1.5 | Rockwell C42 | 22,000 | DIN 7346, ISO 13337 | 1 | 000000000 | 00000 |
21 mm Dia. | ||||||||
| 30 | 21 | 2 | Rockwell C42 | 37,700 | DIN 7346, ISO 13337 | 1 | 000000000 | 0000 |
| 36 | 21 | 2 | Rockwell C42 | 37,700 | DIN 7346, ISO 13337 | 1 | 000000000 | 00000 |
| 40 | 21 | 2 | Rockwell C42 | 37,700 | DIN 7346, ISO 13337 | 1 | 000000000 | 00000 |
| 45 | 21 | 2 | Rockwell C42 | 37,700 | DIN 7346, ISO 13337 | 1 | 000000000 | 00000 |
| 50 | 21 | 2 | Rockwell C42 | 37,700 | DIN 7346, ISO 13337 | 1 | 000000000 | 00000 |
| 60 | 21 | 2 | Rockwell C42 | 37,700 | DIN 7346, ISO 13337 | 1 | 000000000 | 00000 |
| 85 | 21 | 2 | Rockwell C42 | 37,700 | DIN 7346, ISO 13337 | 1 | 000000000 | 00000 |
Metric 18-8 Stainless Steel
End View
| Lg., mm | For Hole Dia., mm | Wall Thick., mm | Min. Hardness | Breaking Strength | Passivation | Specifications Met | Pkg. Qty. | Pkg. | |
1 mm Dia. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 4 | 1 | 0.2 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 100 | 000000000 | 00000 |
| 6 | 1 | 0.2 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 100 | 000000000 | 0000 |
| 8 | 1 | 0.2 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 100 | 000000000 | 0000 |
1.5 mm Dia. | |||||||||
| 4 | 1.5-1.6 | 0.3 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 100 | 000000000 | 0000 |
| 5 | 1.5-1.6 | 0.3 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 100 | 000000000 | 0000 |
| 6 | 1.5-1.6 | 0.3 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 25 | 000000000 | 0000 |
| 8 | 1.5-1.6 | 0.3 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 25 | 000000000 | 0000 |
| 10 | 1.5-1.6 | 0.3 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 25 | 000000000 | 0000 |
| 12 | 1.5-1.6 | 0.3 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 25 | 000000000 | 0000 |
2 mm Dia. | |||||||||
| 4 | 2-2.1 | 0.4 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 100 | 000000000 | 0000 |
| 5 | 2-2.1 | 0.4 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 100 | 000000000 | 0000 |
| 6 | 2-2.1 | 0.4 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 8 | 2-2.1 | 0.4 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 10 | 2-2.1 | 0.4 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 12 | 2-2.1 | 0.4 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 14 | 2-2.1 | 0.4 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 16 | 2-2.1 | 0.4 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 18 | 2-2.1 | 0.4 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 20 | 2-2.1 | 0.4 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 22 | 2-2.1 | 0.4 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 25 | 000000000 | 0000 |
| 24 | 2-2.1 | 0.4 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 30 | 2-2.1 | 0.4 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
2.5 mm Dia. | |||||||||
| 10 | 2.5-2.6 | 0.5 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 25 | 000000000 | 0000 |
| 14 | 2.5-2.6 | 0.5 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 25 | 000000000 | 0000 |
| 20 | 2.5-2.6 | 0.5 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 30 | 2.5-2.6 | 0.5 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
3 mm Dia. | |||||||||
| 4 | 3-3.65 | 0.6 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 100 | 000000000 | 0000 |
| 6 | 3-3.1 | 0.6 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 100 | 000000000 | 0000 |
| 8 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 10 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 12 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 14 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 16 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 18 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 25 | 000000000 | 0000 |
| 20 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 22 | 3-3.1 | 0.6 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 10 | 000000000 | 0000 |
| 24 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 26 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 28 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 30 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 40 | 3-3.1 | 0.6 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
3.5 mm Dia. | |||||||||
| 10 | 3.5-3.65 | 0.75 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 50 | 000000000 | 00000 |
| 20 | 3.5-3.6 | 0.7 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 50 | 000000000 | 00000 |
| 30 | 3.5-3.6 | 0.7 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 50 | 000000000 | 00000 |
4 mm Dia. | |||||||||
| 6 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 8 | 4-4.2 | 0.8 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 10 | 000000000 | 0000 |
| 10 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 12 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 14 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 16 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 18 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 20 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 22 | 4-4.2 | 0.8 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 10 | 000000000 | 0000 |
| 24 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 26 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 30 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 32 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 36 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 40 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 45 | 4-4.2 | 0.8 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 50 | 4-4.2 | 0.8 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 5 | 000000000 | 0000 |
5 mm Dia. | |||||||||
| 10 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 12 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 14 | 5-5.2 | 1 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 10 | 000000000 | 0000 |
| 16 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 18 | 5-5.2 | 1 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 10 | 000000000 | 0000 |
| 20 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 22 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 24 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 26 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 28 | 5-5.2 | 1 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 10 | 000000000 | 0000 |
| 30 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 32 | 5-5.2 | 1 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 10 | 000000000 | 0000 |
| 36 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 40 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 45 | 5-5.2 | 1 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 10 | 000000000 | 0000 |
| 50 | 5-5.2 | 1 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
6 mm Dia. | |||||||||
| 12 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 14 | 6-6.2 | 1.2 | Not Rated | Not Rated | Not Passivated | ISO 8752 | 10 | 000000000 | 0000 |
| 16 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 20 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 24 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 26 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 30 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 36 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 40 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 45 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 00000 |
| 50 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 5 | 000000000 | 0000 |
| 60 | 6-6.2 | 1.2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 5 | 000000000 | 0000 |
8 mm Dia. | |||||||||
| 22 | 8-8.25 | 1.5 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 26 | 8-8.25 | 1.5 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 0000 |
| 30 | 8-8.25 | 1.5 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 10 | 000000000 | 00000 |
| 40 | 8-8.25 | 1.5 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 5 | 000000000 | 00000 |
| 50 | 8-8.25 | 1.5 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
| 55 | 8-8.25 | 1.5 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
| 60 | 8-8.25 | 1.5 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
| 100 | 8-8.25 | 1.5 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
10 mm Dia. | |||||||||
| 24 | 10-10.3 | 2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
| 30 | 10-10.3 | 2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
| 36 | 10-10.3 | 2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
| 40 | 10-10.3 | 2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
| 50 | 10-10.3 | 2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
| 60 | 10-10.3 | 2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
| 80 | 10-10.3 | 2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
| 100 | 10-10.3 | 2 | Not Rated | Not Rated | Passivated | DIN 1481, ISO 8752 | 1 | 000000000 | 0000 |
Vibration-Resistant Slotted Spring Pins
End View
Interlocking teeth help these pins resist sliding when exposed to vibration. Also known as roll, tension, split, and expansion pins, they have a slot that presses closed when the pins are inserted so they don't flex after installation. Use them for fastening, pivoting, and holding.
Squeeze pins closed and install them in a hole slightly smaller than the pin. Tension holds them tight against the hole wall. The ends are chamfered to aid insertion.
Breaking strength is measured as double shear, which is the force required to break a pin into three pieces.
Pins are made of vanadium steel for excellent wear resistance.
For technical drawings and 3-D models, click on a part number.
| Lg. | For Hole Dia. | Wall Thick. | Min. Hardness | Breaking Strength, lbs. | Each | |
Black-Oxide 6150 Vanadium Steel | ||||||
|---|---|---|---|---|---|---|
1/2" Dia. | ||||||
| 2" | 0.5"-0.501" | 0.09" | Rockwell C42 | 8,800 | 000000000 | 00000 |
| 2 1/2" | 0.5"-0.501" | 0.09" | Rockwell C42 | 8,800 | 000000000 | 0000 |
| 3" | 0.5"-0.501" | 0.09" | Rockwell C42 | 8,800 | 000000000 | 0000 |
5/8" Dia. | ||||||
| 2" | 0.625"-0.626" | 0.115" | Rockwell C42 | 13,800 | 000000000 | 00000 |
| 3" | 0.625"-0.626" | 0.115" | Rockwell C42 | 13,800 | 000000000 | 00000 |
| 3 1/2" | 0.625"-0.626" | 0.115" | Rockwell C42 | 13,800 | 000000000 | 00000 |
| 4" | 0.625"-0.626" | 0.115" | Rockwell C42 | 13,800 | 000000000 | 00000 |
| 5" | 0.625"-0.626" | 0.115" | Rockwell C42 | 13,800 | 000000000 | 00000 |
3/4" Dia. | ||||||
| 2" | 0.75"-0.751" | 0.144" | Rockwell C42 | 20,000 | 000000000 | 00000 |
| 3" | 0.75"-0.751" | 0.144" | Rockwell C42 | 20,000 | 000000000 | 00000 |
| 4" | 0.75"-0.751" | 0.144" | Rockwell C42 | 20,000 | 000000000 | 00000 |
| 5" | 0.75"-0.751" | 0.144" | Rockwell C42 | 20,000 | 000000000 | 00000 |
| 6" | 0.75"-0.751" | 0.144" | Rockwell C42 | 20,000 | 000000000 | 00000 |
1" Dia. | ||||||
| 4" | 1"-1.001" | 0.188" | Rockwell C42 | 35,000 | 000000000 | 00000 |
| 5" | 1"-1.001" | 0.188" | Rockwell C42 | 35,000 | 000000000 | 00000 |
| 6" | 1"-1.001" | 0.188" | Rockwell C42 | 35,000 | 000000000 | 00000 |
1 1/4" Dia. | ||||||
| 4" | 1.25"-1.252" | 0.23" | Rockwell C42 | 53,500 | 000000000 | 00000 |
| 5" | 1.25"-1.252" | 0.23" | Rockwell C42 | 53,500 | 000000000 | 00000 |
| 6" | 1.25"-1.252" | 0.23" | Rockwell C42 | 53,500 | 000000000 | 00000 |
Slotted Spring Pin Assortments
Slotted spring pins are also known as roll, tension, split, and expansion pins. The slot is pressed closed when the pins are inserted, so they don't flex after installation. Actual diameters are slightly larger than the diameters shown, allowing pins to fit tightly when installed. Wall thickness is approximately 20% of the diameter.
Zinc-plated steel pins resist corrosion in wet environments.
18-8 stainless steel spring pins are chemical resistant and may be mildly magnetic.
420 stainless steel spring pins are stronger and more wear resistant than 18-8 stainless steel spring pins. They're mildly chemical resistant and magnetic.
| Number of Pieces | Sizes Included | Specifications Met | Container Type | Each | |
Inch | |||||
|---|---|---|---|---|---|
1050-1095 Spring Steel | |||||
| 300 | 1/16" to 3/8" Dia. | __ | Plastic Box | 000000000 | 000000 |
| 500 | 1/16" to 7/16" Dia. | __ | Plastic Box | 000000000 | 00000 |
| 750 | 1/16" to 7/16" Dia. | __ | Plastic Box | 000000000 | 000000 |
Zinc-Plated 1050-1095 Spring Steel | |||||
| 25 | 1/8" to 3/8" Dia. | __ | Plastic Box | 000000000 | 0000 |
| 68 | 1/8" to 3/8" Dia. | __ | Plastic Box | 000000000 | 00000 |
| 300 | 1/16" to 3/8" Dia. | __ | Plastic Box | 000000000 | 00000 |
| 500 | 1/16" to 7/16" Dia. | __ | Plastic Box | 000000000 | 00000 |
| 750 | 1/16" to 7/16" Dia. | __ | Plastic Box | 000000000 | 000000 |
18-8 Stainless Steel | |||||
| 300 | 1/16" to 3/8" Dia. | __ | Plastic Box | 000000000 | 000000 |
| 500 | 1/16" to 7/16" Dia. | __ | Plastic Box | 000000000 | 000000 |
| 750 | 1/16" to 7/16" Dia. | __ | Plastic Box | 000000000 | 000000 |
420 Stainless Steel | |||||
| 25 | 1/8" to 3/8" Dia. | __ | Plastic Box | 000000000 | 00000 |
| 68 | 1/8" to 3/8" Dia. | __ | Plastic Box | 000000000 | 00000 |
| 300 | 1/16" to 3/8" Dia. | __ | Plastic Box | 000000000 | 00000 |
| 500 | 1/16" to 7/16" Dia. | __ | Plastic Box | 000000000 | 000000 |
| 750 | 1/16" to 7/16" Dia. | __ | Plastic Box | 000000000 | 000000 |
Metric | |||||
1050-1095 Spring Steel | |||||
| 520 | 2 mm to 6 mm Dia. | DIN 1481 | Plastic Box | 000000000 | 00000 |
Zinc-Plated 1050-1095 Spring Steel | |||||
| 520 | 2 mm to 6 mm Dia. | ISO 8752 | Plastic Box | 000000000 | 000000 |
18-8 Stainless Steel | |||||
| 520 | 2 mm to 6 mm Dia. | ISO 8752 | Plastic Box | 000000000 | 000000 |