The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

With five rosin flux cores, this solder joins faster, uses less material, and transmits less heat than single-flux-core solder.

The high melting point prevents remelting when soldering successive joints with another solder.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

This solder is commonly used in solder melting pots.

This solder is commonly used in solder melting pots.

This solder is commonly used in solder melting pots.

This solder is commonly used in solder melting pots.

The flux residue easily washes away with water.

The flux residue easily washes away with water.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

This solder is commonly used in solder melting pots.

Made with lead and silver, this solder ribbon has greater tensile strength and density than other indium-based solders, giving it a stronger hold. Solder ribbon is more easily used on large, flat areas than wire solder.

For use on large, flat areas, this indium ribbon solder is soft and malleable—even as temperatures approach absolute zero—to form an airtight seal between metal.

Without a flux core, this solder allows you to choose the flux that works best for your application.

Use this flux for non-potable (nondrinking) water applications.

Protect the solder joint from corrosion with this flux paste.

This flux has strong cleaning action and leaves residue that will not compromise the reliability of the joint.

This flux has less cleaning action, but leaves the least amount of residue.

Fill this dispenser with the flux of your choice to prepare electrical assemblies and printed circuit boards for soldering.

Solder with complete control over the temperature—these stations let you adjust as you go.

These stations are ESD (electrostatic discharge) safe to protect sensitive components. The tip is a fixed temperature—change out the tip to adjust the temperature.

Use these irons for your high-volume jobs.

These irons put an extra layer of cork insulation between your hand and the iron.

These irons have a large tip for excellent heat transfer, making them ideal for running seams in sheet metal.

These guns heat up the instant you pull the trigger and cool down quickly when you let go.

A plier-style handpiece confines heat to only where it touches when you’re treating, brazing, and silver soldering small parts.

These irons run on AA batteries and are for intermittent use.

Kits include an iron, tips for a variety of applications, a heat-shrink attachment, an ejector, and a cap.

Kits include an iron, tips for a variety of applications, a stand, a sponge, and a cap.

These irons are continuous duty.

Touch the tip of your soldering iron for a fast, accurate temperature reading. Within about five seconds, you'll know how hot the iron is, so you can decide whether it's ready for your particular soldering material and application.

No need to add flux—these alloys have it built in.

No need to add flux—these alloys have it built in.

These alloys create stronger bonds than standard brazing alloys.

These alloys melt into thicker liquid than standard brazing alloys, which allows them to fill larger gaps.

These alloys create stronger bonds than standard brazing alloys for copper.

Use these alloys for general purpose applications.

These alloys are also known as trimetal brazing strips. They have silver with nickel alloy sides and a copper core.

Use this flux with silver brazing alloys to clean and prepare surfaces. It is boron modified and residue washes off with hot water.

Without a flux core, these braids allows you to choose the flux that works best for your application.

Also known as solder suckers, these tools remove heated, liquid solder.

Kits include a torch, a solder tip, a heat tip, a hot knife tip, a heat-shrink attachment, a foam cutter, a wire cutter, needle-nose pliers, 60/40 tin/lead solder, a sponge, and a case.

The low profile of these torches saves bench space and the wide, heavy base adds stability.

These torches have approximately half the BTU output of standard propane torches for use in light duty applications.

The torch tip rotates 360° to put the heat exactly where you need it.

Two burners with a short, wide flame concentrate heat over a large area. The tip rotates 360° to put the heat exactly where you need it.

Save time by quickly connecting and disconnecting your propane torch tips to get the right output for your job. Kits can also be used with Apachi, HPG, and propylene.

Use these tools to hold, separate, and position wire, springs, and other small parts.

Change tips to use a different size or style pick for holding and positioning wire, springs, and other small parts.

The handle has a magnet at the end to pick up small steel objects. Use these picks to hold and position wire, springs, and other small parts.

A different tip at each end allows you to install, extract, and position parts with one tool.

Solder won’t stick to these assorted picks, which are used for positioning circuit board components.

These assorted picks have insulated handles that protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Avoid nicking or scratching sensitive components. Also known as spudgers, these picks are good for adjusting small wires or separating press-fit plastic components.

The assorted needle-sharp picks in these sets are similar to dental instruments and suitable for work around delicate circuits and components.

The assorted picks in these sets are used to install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

A different tip at each end installs and positions tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

An integral component of casting babbitt bearings, apply a thin coat of this paste to bronze, cast iron, and steel bearing housings before casting to prevent separation.

With 99.9% tin content, this material is considered commercially pure. It's commonly used to make gaskets and filters.

Bond heat sinks to surfaces, eliminating air gaps for maximum heat transfer.

Spray on this clear gel to protect components and surfaces from heat damage and discoloration caused by soldering, welding, and brazing. It is nonstaining and won't leave a residue.