Spanner Drive Machine Screws

Filter by

Drive Style

Drilled Spanner

System of Measurement

Thread Size

Length

Fastener Head Type

Drive Size

Material

Head Diameter

Rounded Head Style

Threading

Flat Head Profile

Head Height

Thread Type

Thread Spacing

Thread Direction

Countersink Angle

Tip Type

Performance

Thread Fit

Unified Standard Class 2A

RoHS

Compliant

Not Compliant

DFARS Specialty Metals

Not Compliant

REACH

Compliant

Tensile Strength

30,000 psi to 99,999 psi

Export Control Classification Number (ECCN)

Hardness

Specifications Met

183 Products

Tamper-Resistant Drilled Spanner Stainless Steel Flat Head Screws

Image of Product. Front orientation. Contains MultipleImages. Flat Head Screws. Tamper-Resistant Drilled Spanner Stainless Steel Flat Head Screws.

The unique two-hole design deters tampering. These screws only turn with a drilled spanner driver, making them hard to force with other tools. Also known as pig-nose drives, their two contact points won't withstand much torque, so they're good for light duty tasks. Made of stainless steel, they won't rust or corrode when exposed to moisture and chemicals.

Length is measured from the top of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

Undercut Profile—About a third thinner than standard heads, the undercut profile fits into shallow holes in thin material. The thin head also has more threading on the shaft, so they're often used to keep short screws from coming loose.

Screwdriver Bits—Turn screws by hand for more control and less chance of overtightening compared to power tools.

Power Tool Bits—Pair these bits with your power tools to turn screws more quickly than manual tools.

	Screws											Screwdriver Bits		Power Tool Bits
				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.		Each		Each
18-8 Stainless Steel







				4-40

				1/4"	82°	Undercut	0.225"	0.047"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	00000	0000000	00000


				5/16"	82°	Standard	0.225"	0.067"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	0000	00000000	0000	0000000	0000
				3/8"	82°	Standard	0.212"	0.067"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	0000	00000000	0000	0000000	0000
				1/2"	82°	Standard	0.212"	0.067"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	0000	00000000	0000	0000000	0000




						6-32

						1/4"	82°	Undercut	0.262"	0.059"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	0000	00000000	0000	0000000	0000


						5/16"	82°	Standard	0.279"	0.083"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	0000	00000000	0000	0000000	0000
						3/8"	82°	Standard	0.262"	0.083"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	0000	00000000	0000	0000000	0000
						1/2"	82°	Standard	0.262"	0.083"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	0000	00000000	0000	0000000	0000
						5/8"	82°	Standard	0.279"	0.083"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
						3/4"	82°	Standard	0.262"	0.083"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
						1"	82°	Standard	0.262"	0.083"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
						1 1/2"	82°	Standard	0.262"	0.083"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
						2"	82°	Standard	0.262"	0.083"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000




								8-32

								1/4"	82°	Undercut	0.312"	0.070"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	0000	00000000	0000	0000000	0000


								5/16"	82°	Standard	0.332"	0.100"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								3/8"	82°	Standard	0.312"	0.100"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	0000	00000000	0000	0000000	0000
								1/2"	82°	Standard	0.312"	0.100"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								5/8"	82°	Standard	0.332"	0.100"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								3/4"	82°	Standard	0.312"	0.100"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								1"	82°	Standard	0.312"	0.100"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								1 1/4"	82°	Standard	0.312"	0.100"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								1 1/2"	82°	Standard	0.312"	0.100"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								2"	82°	Standard	0.312"	0.100"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000




										10-24

										3/8"	82°	Standard	0.332"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000


										1/2"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
										5/8"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
										3/4"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
										1"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
										1 1/4"	82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
1 1/2"										82°	Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
2"	82°									Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000




		10-32

		3/8"	82°							Standard	0.385"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000


		1/2"	82°							Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
		5/8"	82°							Standard	0.385"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
		3/4"	82°							Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
		1"	82°							Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
		1 1/4"	82°							Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
		1 1/2"	82°							Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
		2"	82°							Standard	0.362"	0.116"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
		2 1/2"	82°	Standard						0.362"	0.116"	Partially Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000




				12-24

				1/2"	82°					Undercut	0.412"	0.092"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000


				3/4"	82°					Standard	0.412"	0.132"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000




										1/4"-20

										1/2"	82°	Undercut	0.477"	0.107"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000


						5/8"	82°			Standard	0.507"	0.153"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
						3/4"	82°			Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
						1"	82°			Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
						1 1/4"	82°			Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
						1 1/2"	82°			Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
						2"	82°			Standard	0.477"	0.153"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
						2 1/2"	82°			Standard	0.477"	0.153"	Partially Threaded	70,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000




										M3 × 0.5 mm

										6 mm	90°	Standard	5.59 mm	1.65 mm	Fully Threaded	80,000	—	25	000000000	0000	00000000	0000	0000000	0000


								8 mm		90°	Standard	5.59 mm	1.65 mm	Fully Threaded	80,000	—	25	000000000	0000	00000000	0000	0000000	0000
								10 mm	90°	Standard	5.59 mm	1.65 mm	Fully Threaded	80,000	—	25	000000000	0000	00000000	0000	0000000	0000
								12 mm	90°	Standard	5.59 mm	1.65 mm	Fully Threaded	80,000	—	25	000000000	0000	00000000	0000	0000000	0000




										M4 × 0.7 mm

										6 mm	90°	Standard	7.50 mm	2.20 mm	Fully Threaded	80,000	—	25	000000000	0000	00000000	0000	0000000	0000


										8 mm	90°	Standard	7.50 mm	2.20 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
										10 mm	90°	Standard	7.50 mm	2.20 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
12 mm										90°	Standard	7.50 mm	2.20 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
16 mm	90°									Standard	7.50 mm	2.20 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000




										M5 × 0.8 mm

										8 mm	90°	Standard	9.19 mm	2.50 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000


										10 mm	90°	Standard	9.19 mm	2.50 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
										12 mm	90°	Standard	9.19 mm	2.50 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
										16 mm	90°	Standard	9.19 mm	2.50 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
										20 mm	90°	Standard	9.19 mm	2.50 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000




										M6 × 1 mm

										12 mm	90°	Standard	11.00 mm	3.00 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000


										16 mm	90°	Standard	11.00 mm	3.00 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
										20 mm	90°	Standard	11.00 mm	3.00 mm	Fully Threaded	80,000	—	10	000000000	0000	00000000	0000	0000000	0000
										25 mm	90°	Standard	11.00 mm	3.00 mm	Fully Threaded	80,000	—	10	000000000	0000	00000000	0000	0000000	0000
				30 mm						90°	Standard	11.00 mm	3.00 mm	Fully Threaded	80,000	—	10	000000000	0000	00000000	0000	0000000	0000

Tamper-Resistant Drilled Spanner Stainless Steel Pan Head Screws

The unique two-hole design inhibits tampering. These screws only turn with a drilled spanner driver, making them hard to force with other tools. Also known as pig-nose drives, their two contact points won't withstand much torque, so they're good for light duty tasks. Made of stainless steel, they won't rust or corrode when exposed to moisture and chemicals. Pan heads have a moderate height and width profile, offering a middle ground between narrower button heads and wider truss heads.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

Screwdriver Bits—Turn screws by hand for more control and less chance of overtightening compared to power tools.

Power Tool Bits—Pair these bits with your power tools to turn screws more quickly than manual tools.

	Screws									Screwdriver Bits		Power Tool Bits
		Head
	Lg.	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.		Each		Each
18-8 Stainless Steel







				4-40

				3/16"	0.219"	0.068"	Fully Threaded	80,000	—	25	000000000	00000	00000000	00000	0000000	00000


				1/4"	0.219"	0.068"	Fully Threaded	80,000	—	25	000000000	0000	00000000	0000	0000000	0000
				3/8"	0.219"	0.068"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
				1/2"	0.219"	0.068"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
				3/4"	0.219"	0.068"	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000




						6-32

						3/16"	0.27"	0.082"	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000


						1/4"	0.27"	0.082"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
						3/8"	0.27"	0.082"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
						1/2"	0.27"	0.082"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
						3/4"	0.27"	0.082"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
						1"	0.27"	0.082"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000




								8-32

								1/4"	0.322"	0.096"	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000


								3/8"	0.322"	0.096"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								1/2"	0.322"	0.096"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								5/8"	0.322"	0.096"	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
								3/4"	0.322"	0.096"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								1"	0.322"	0.096"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								1 1/4"	0.322"	0.096"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
								1 1/2"	0.322"	0.096"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000




										10-24

										3/8"	0.373"	0.11"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000


										1/2"	0.373"	0.11"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
										3/4"	0.373"	0.11"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
										1"	0.373"	0.11"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
										1 1/2"	0.373"	0.11"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
										2"	0.373"	0.11"	Fully Threaded	80,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000




10-32

1/4"	0.373"											0.11"	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000


3/8"	0.373"											0.11"	Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
1/2"	0.373"	0.11"										Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
3/4"	0.373"	0.11"	Fully Threaded									80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
1"	0.373"	0.11"	Fully Threaded									80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
1 1/2"	0.373"	0.11"	Fully Threaded									80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
2"	0.373"	0.11"	Fully Threaded									80,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000




		1/4"-20

		1/4"	0.492"									0.144"	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000


		3/8"	0.492"	0.144"								Fully Threaded	80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
		1/2"	0.492"	0.144"	Fully Threaded							80,000	ASME B18.6.3	25	000000000	00000	00000000	0000	0000000	0000
		5/8"	0.492"	0.144"	Fully Threaded							80,000	—	10	000000000	0000	00000000	0000	0000000	0000
		3/4"	0.492"	0.144"	Fully Threaded							80,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
		1"	0.492"	0.144"	Fully Threaded							80,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
		1 1/4"	0.492"	0.144"	Fully Threaded							80,000	—	10	000000000	00000	00000000	0000	0000000	0000
		1 1/2"	0.492"	0.144"	Fully Threaded							80,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000
		2"	0.492"	0.144"	Fully Threaded							80,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000
		3"	0.492"	0.144"	Partially Threaded							80,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000




				1/4"-28

				1/2"	0.492"	0.144"						Fully Threaded	80,000	—	10	000000000	0000	00000000	0000	0000000	0000


				3/4"	0.492"	0.144"	Fully Threaded					80,000	—	10	000000000	0000	00000000	0000	0000000	0000
				1"	0.492"	0.144"	Fully Threaded					80,000	—	10	000000000	0000	00000000	0000	0000000	0000




						M3 × 0.5 mm

						6 mm	6 mm					1.8 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000


						8 mm	6 mm					1.8 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
						10 mm	6 mm					1.8 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
						12 mm	6 mm					1.8 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000




								M4 × 0.7 mm

								6 mm	8 mm			2.4 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000


								8 mm	8 mm			2.4 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
								10 mm	8 mm			2.4 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
								12 mm	8 mm			2.4 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
								16 mm	8 mm			2.4 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000




										M5 × 0.8 mm

										8 mm	9.98 mm	3 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000


										10 mm	9.98 mm	3 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
										12 mm	9.98 mm	3 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
										16 mm	9.98 mm	3 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
20 mm										9.98 mm	3 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000




										M6 × 1 mm

										10 mm	11.99 mm	3.59 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000


										12 mm	11.99 mm	3.59 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
										16 mm	11.99 mm	3.59 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
										20 mm	11.99 mm	3.59 mm	Fully Threaded	80,000	—	25	000000000	00000	00000000	0000	0000000	0000
										25 mm	11.99 mm	3.59 mm	Fully Threaded	80,000	—	10	000000000	0000	00000000	0000	0000000	0000

Tamper-Resistant Drilled Spanner Stainless Steel Truss Head Screws

These screws have a wide head that distributes weight and a two-hole design that deters tampering. They only turn with a drilled spanner driver, making them hard to force with other tools. Also known as pig-nose drives, their two contact points won't withstand much torque, so they're good for light duty tasks. Made of stainless steel, they won't rust or corrode when exposed to moisture and chemicals. Their wide head spreads out pressure without adding a washer to reduce the risk of crushing thin material, such as sheet metal.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

Screwdriver Bits—Turn screws by hand for more control and less chance of overtightening compared to power tools.

Power Tool Bits—Pair these bits with your power tools to turn screws more quickly than manual tools.

	Screws									Screwdriver Bits		Power Tool Bits
		Head
	Lg.	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.		Each		Each
18-8 Stainless Steel







				6-32

				1/4"	0.321"	0.086"	Fully Threaded	70,000	—	25	000000000	000000	00000000	00000	0000000	00000


				3/8"	0.321"	0.086"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000
				1/2"	0.321"	0.086"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000
				3/4"	0.321"	0.086"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000
				1"	0.321"	0.086"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000




						8-32

						1/4"	0.384"	0.102"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000


						3/8"	0.384"	0.102"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000
						1/2"	0.384"	0.102"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
						3/4"	0.384"	0.102"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
						1"	0.384"	0.102"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
						1 1/4"	0.384"	0.102"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
						1 1/2"	0.384"	0.102"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
						2 1/2"	0.384"	0.102"	Partially Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000




								10-24

								1/2"	0.448"	0.128"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000


								3/4"	0.448"	0.128"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000




										10-32

										1/4"	0.448"	0.118"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000


										3/8"	0.448"	0.118"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000
										1/2"	0.448"	0.118"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000
										3/4"	0.448"	0.128"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
										1"	0.448"	0.118"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000




												1/4"-20

												3/8"	0.573"	0.15"	Fully Threaded	70,000	—	25	000000000	00000	00000000	0000	0000000	0000


1/2"												0.573"	0.15"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
3/4"	0.573"											0.15"	Fully Threaded	70,000	—	10	000000000	0000	00000000	0000	0000000	0000
1"	0.573"											0.15"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
1 1/2"	0.573"											0.15"	Fully Threaded	70,000	—	10	000000000	00000	00000000	0000	0000000	0000




		5/16"-18

		3/4"	0.698"									0.183"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000


		1"	0.698"									0.183"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	0000	00000000	0000	0000000	0000
		1 1/4"	0.698"									0.183"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000
		1 1/2"	0.698"									0.183"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000
		2"	0.698"									0.183"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000
		2 1/2"	0.698"									0.183"	Partially Threaded	70,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000




				3/8"-16

				3/4"	0.823"							0.215"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000


				1"	0.823"							0.215"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000
				1 1/4"	0.823"							0.215"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000
				1 1/2"	0.823"							0.215"	Fully Threaded	70,000	ASME B18.6.3	10	000000000	00000	00000000	0000	0000000	0000
				2"	0.823"							0.215"	Fully Threaded	70,000	ASME B18.6.3	5	000000000	00000	00000000	0000	0000000	0000
				2 1/2"	0.823"							0.215"	Partially Threaded	70,000	ASME B18.6.3	5	000000000	00000	00000000	0000	0000000	0000
				3"	0.823"							0.215"	Fully Threaded	70,000	ASME B18.6.3	5	000000000	00000	00000000	0000	0000000	0000