ID (C) ID (C) |
|---|
For Hole Diameter (A) For Hole Diameter (A) |
|---|
Flange Diameter (D) Flange Diameter (D) |
|---|
For Use With For Use With |
|---|
|
Overall Height (E) Overall Height (E) |
|---|
|
|
|
Hardness Hardness |
|---|
|
About Durometer Hardness Scales
More
Split Grommets
A slit in the side of these grommets allows you to install them around wire, cable, and cords that are already in place. They snap into the hole and their wings hold them tight. Use them to turn rough-edged and uneven holes into smooth, insulated holes. Made of plastic, these grommets are chemical resistant and won't dry out and become brittle when exposed to UV rays. All have an extra-hard rating to withstand high levels of impact. They can be used outdoors.
For technical drawings and 3-D models, click on a part number.
| For Hole Dia. (A) | For Material Thick. (B) | ID (C) | Flange Dia. (D) | Overall Ht. (E) | Hardness Rating | Hardness | Temp. Range, °F | For Use Outdoors | Color | Pkg. Qty. | Pkg. | |
Nylon Plastic | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 9/32" | 1/32"-1/16" | 7/32" | 11/32" | 15/64" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 00000000 | 000000 |
| 3/8" | 1/32"-1/8" | 17/64" | 27/64" | 25/64" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 0000000 | 0000 |
| 7/16" | 1/32"-1/8" | 21/64" | 1/2" | 25/64" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 0000000 | 0000 |
| 1/2" | 1/32"-1/16" | 3/8" | 9/16" | 1/4" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 00000000 | 00000 |
| 1/2" | 1/32"-1/8" | 5/16" | 9/16" | 25/64" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 0000000 | 0000 |
| 9/16" | 1/32"-1/8" | 25/64" | 41/64" | 25/64" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 0000000 | 00000 |
| 5/8" | 1/32"-1/16" | 33/64" | 45/64" | 1/4" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 00000000 | 00000 |
| 5/8" | 1/32"-1/8" | 29/64" | 11/16" | 25/64" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 0000000 | 00000 |
| 21/32" | 1/32"-1/8" | 31/64" | 47/64" | 13/32" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 00000000 | 00000 |
| 3/4" | 1/32"-1/16" | 5/8" | 53/64" | 1/4" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 00000000 | 00000 |
| 3/4" | 1/32"-1/8" | 35/64" | 25/32" | 25/64" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 0000000 | 00000 |
| 7/8" | 1/32"-1/16" | 45/64" | 29/32" | 1/4" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 00000000 | 00000 |
| 7/8" | 1/32"-1/8" | 43/64" | 59/64" | 13/32" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 100 | 0000000 | 00000 |
| 15/16" | 1/32"-1/16" | 13/16" | 1 1/16" | 1/4" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 50 | 00000000 | 00000 |
| 1" | 1/32"-1/8" | 13/16" | 1 3/64" | 13/32" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 50 | 0000000 | 00000 |
| 1 1/16" | 1/32"-1/16" | 55/64" | 1 7/64" | 17/64" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 50 | 00000000 | 00000 |
| 1 3/32" | 1/32"-1/8" | 7/8" | 1 5/32" | 13/32" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 50 | 0000000 | 00000 |
| 1 1/4" | 1/32"-1/8" | 1 3/64" | 1 11/32" | 13/32" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 50 | 0000000 | 00000 |
| 1 3/8" | 1/32"-1/8" | 1 11/64" | 1 15/32" | 13/32" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 25 | 0000000 | 00000 |
| 1 1/2" | 1/32"-1/8" | 1 1/4" | 1 37/64" | 27/64" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 25 | 0000000 | 00000 |
| 2" | 1/32"-1/8" | 1 47/64" | 2 1/8" | 27/64" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 25 | 0000000 | 00000 |
| 2 1/2" | 1/32"-1/4" | 2" | 2 39/64" | 23/32" | Extra Hard | Rockwell R120 | 0° to 220° | Yes | Black | 10 | 0000000 | 00000 |
Split Sealing Grommets
The two-piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture. Made of nitrile rubber, all are abrasion, oil, and grease resistant. Use their aluminum flange to secure them to surfaces with screws. They can be used outdoors.
Grommets with a hard rating withstand high levels of impact.
For technical drawings and 3-D models, click on a part number.
| ID (C) | Flange Dia. (D) | Overall Ht. (E) | Hardness Rating | Hardness | Temp. Range, °F | For Use Outdoors | No. of Mount. Holes | Mounting Hole Dia. | Mounting Fasteners Included | Color | Each | |
Nitrile Rubber with Aluminum Flange | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 3" | 0.14" | Hard | Durometer 55B | -20° to 220° | Yes | 6 | 1/8" | No | Black | 0000000 | 000000 |
| 1/4" | 3" | 0.14" | Hard | Durometer 55B | -20° to 220° | Yes | 6 | 1/8" | No | Black | 0000000 | 00000 |
| 3/8" | 3" | 0.14" | Hard | Durometer 55B | -20° to 220° | Yes | 6 | 1/8" | No | Black | 0000000 | 00000 |
| 1/2" | 3" | 0.14" | Hard | Durometer 55B | -20° to 220° | Yes | 6 | 1/8" | No | Black | 0000000 | 00000 |
| 5/8" | 3" | 0.14" | Hard | Durometer 55B | -20° to 220° | Yes | 6 | 1/8" | No | Black | 0000000 | 00000 |
| 3/4" | 3" | 0.14" | Hard | Durometer 55B | -20° to 220° | Yes | 6 | 1/8" | No | Black | 0000000 | 00000 |
| 7/8" | 3" | 0.14" | Hard | Durometer 55B | -20° to 220° | Yes | 6 | 1/8" | No | Black | 0000000 | 00000 |
| 1" | 3" | 0.14" | Hard | Durometer 55B | -20° to 220° | Yes | 6 | 1/8" | No | Black | 0000000 | 00000 |
Create-Your-Own Split Sealing Grommets
Cut the center of these grommets with a utility knife to create custom IDs. The two-piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture. Made of nitrile rubber, the grommets are abrasion, oil, and grease resistant. All have a hard rating to withstand high levels of impact. Use their aluminum flange to secure them to surfaces with screws. They can be used outdoors.
For technical drawings and 3-D models, click on a part number.
| ID | Flange Dia. (D) | Overall Ht. (E) | Hardness Rating | Hardness | Temp. Range, °F | For Use Outdoors | No. of Mount. Holes | Mounting Hole Dia. | Mounting Fasteners Included | Color | Each | |
Nitrile Rubber with Aluminum Flange | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/32"-1 3/4" | 3" | 0.14" | Hard | Durometer 55B | -20° to 220° | Yes | 6 | 1/8" | No | Black | 0000000 | 000000 |
Shaft Grommets
Support shafts, bearings, and other moving parts that are routed through a hole. These grommets are slippery to allow parts to move freely in the hole. Install them on thin sheet-metal panels. All of the grommets are split, which makes them easy to snap into place while also allowing them to expand if they heat up or absorb moisture. Made of plastic, they are chemical resistant and won't dry out and become brittle when exposed to UV rays. All have an extra-hard rating to withstand high levels of impact. They can be used outdoors.
Grommets with MDS reinforcement have added wear resistance.
For technical drawings and 3-D models, click on a part number.
| For Hole Dia. (A) | For Material Thick. (B) | ID (C) | Flange Dia. (D) | Flange Ht. | Overall Ht. (E) | Hardness Rating | Hardness | Temp. Range, °F | For Use Outdoors | Color | Each | |
Nylon Plastic | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 11/64" | 0.072"-0.135" | 1/8" | 3/16", 1/4" | 1/32" | 0.201" | Extra Hard | Rockwell R120 | -40° to 280° | Yes | Blue | 0000000 | 00000 |
| 15/64" | 0.072"-0.135" | 3/16" | 1/4", 5/16" | 1/32" | 0.201" | Extra Hard | Rockwell R120 | -40° to 280° | Yes | Blue | 0000000 | 0000 |
| 5/16" | 0.072"-0.135" | 1/4" | 11/32", 7/16" | 1/32" | 0.201" | Extra Hard | Rockwell R120 | -40° to 280° | Yes | Blue | 0000000 | 0000 |
| 3/8" | 0.072"-0.135" | 5/16" | 13/32", 1/2" | 1/32" | 0.201" | Extra Hard | Rockwell R120 | -40° to 280° | Yes | Blue | 0000000 | 0000 |
| 7/16" | 0.072"-0.135" | 3/8" | 15/32", 9/16" | 1/32" | 0.201" | Extra Hard | Rockwell R120 | -40° to 280° | Yes | Blue | 0000000 | 0000 |
| 1/2" | 0.072"-0.135" | 7/16" | 17/32", 5/8" | 1/32" | 0.201" | Extra Hard | Rockwell R120 | -40° to 280° | Yes | Blue | 0000000 | 0000 |
| 9/16" | 0.072"-0.135" | 1/2" | 19/32", 11/16" | 1/32" | 0.201" | Extra Hard | Rockwell R120 | -40° to 280° | Yes | Blue | 0000000 | 0000 |
| 11/16" | 0.072"-0.135" | 5/8" | 23/32", 7/8" | 1/32" | 0.201" | Extra Hard | Rockwell R120 | -40° to 280° | Yes | Blue | 0000000 | 0000 |
| 13/16" | 0.072"-0.135" | 3/4" | 27/32", 1" | 1/32" | 0.201" | Extra Hard | Rockwell R120 | -40° to 280° | Yes | Blue | 0000000 | 0000 |
Nylon Plastic with MDS Reinforcement | ||||||||||||
| 4.2mm | 1.45mm-2.34mm | 3mm | 4.8mm, 6mm | 0.6mm | 3.2mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 4.2mm | 2.87mm-3.13mm | 3mm | 4.8mm, 6mm | 0.6mm | 4.2mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 5.2mm | 1.45mm-2.34mm | 4mm | 5.9mm, 7mm | 0.6mm | 3.2mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 5.2mm | 2.87mm-3.13mm | 4mm | 5.9mm, 7mm | 0.6mm | 4.2mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 6.2mm | 1.45mm-2.34mm | 5mm | 6.8mm, 8mm | 0.6mm | 3.2mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 6.2mm | 2.87mm-3.13mm | 5mm | 6.8mm, 8mm | 0.6mm | 4.2mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 7.2mm | 1.45mm-2.34mm | 6mm | 7.8mm, 11mm | 0.6mm | 3.2mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 7.2mm | 2.87mm-3.13mm | 6mm | 7.8mm, 11mm | 0.6mm | 4.2mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 9.6mm | 1.45mm-2.34mm | 8mm | 10.4mm, 13mm | 0.8mm | 3.6mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 9.6mm | 2.87mm-3.13mm | 8mm | 10.4mm, 13mm | 0.8mm | 4.6mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 10.6mm | 1.45mm-2.34mm | 9mm | 11.4mm, 14mm | 0.8mm | 3.6mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 11.6mm | 1.45mm-2.34mm | 10mm | 12.4mm, 15mm | 0.8mm | 3.6mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 11.6mm | 2.87mm-3.13mm | 10mm | 12.4mm, 15mm | 0.8mm | 4.6mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 13.6mm | 1.45mm-2.34mm | 12mm | 14.4mm, 17mm | 0.8mm | 3.6mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |
| 13.6mm | 2.87mm-3.13mm | 12mm | 14.4mm, 17mm | 0.8mm | 4.6mm | Extra Hard | Durometer 75D | -40° to 170° | Yes | Black | 0000000 | 0000 |