About Gears
More
L Series Timing Belt Pulleys
Pulleys are L series (light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
| OD | Number of Teeth | Pitch | For Shaft Dia. | Bore Type | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Number of Flanges | Fabrication | Material | Hub Dia. | Each | |
For 1/2" Max. Belt Wd. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.672" | 12 | 0.375" | 3/8" | Finished | 0.563" | 0.75" | 1.25" | 1.432" | 2 | Sintered | Steel | 1.063" | 0000000 | 000000 |
For 3/4" Max. Belt Wd. | ||||||||||||||
| 1.672" | 12 | 0.375" | 3/8" | Finished | 0.813" | 1" | 1.5" | 1.432" | 2 | Sintered | Steel | 1.063" | 00000000 | 00000 |
XL Series Corrosion-Resistant Timing Belt Pulleys
Pulleys are anodized aluminum, which is more corrosion resistant than steel. They are XL series (extra light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
| OD | Number of Teeth | Pitch | For Shaft Dia. | Bore Type | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Fabrication | Material | Hub Dia. | Each | |
For 3/8" Max. Belt Wd. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
With Hub—Two Flanges | |||||||||||||
| 1.75" | 24 | 0.200" | 1/4" | Finished | 0.43" | 0.563" | 0.906" | 1.528" | Machined | Anodized Aluminum | 1.063" | 0000000 | 000000 |
| 1.75" | 24 | 0.200" | 3/8" | Finished | 0.43" | 0.563" | 0.906" | 1.528" | Machined | Anodized Aluminum | 1.063" | 0000000 | 00000 |
XL Series Timing Belt Pulleys
Pulleys are XL series (extra light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
| OD | Number of Teeth | Pitch | For Shaft Dia. | Bore Type | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Number of Flanges | Fabrication | Hub Dia. | Each | |
For 3/8" Max. Belt Wd. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.756" | 24 | 0.200" | 1/4" | Finished | 0.422" | 0.563" | 0.875" | 1.528" | 2 | Sintered | 1.063" | 00000000 | 000000 |
Metal Gears and Gear Racks—14 1/2° Pressure Angle
A former industry standard, 14½° pressure angle gears are often found on older machinery. Made of carbon steel, they have high strength and are better than plastic gears and gear racks for high-load, high-speed, and heavy duty applications.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion.
For components to mesh correctly, they must have the same pressure angle and pitch.
Gears with machinable bore have a large hub diameter so you can machine them to fit your shaft.
Gears with hardened teeth are more wear resistant than gears with teeth that are not hardened. Gears with teeth that are not hardened can be hardened to fit your application. Hardening a gear's teeth increases its wear resistance.
For technical drawings and 3-D models, click on a part number.
Hub | Keyway | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gear Pitch  | Number of Teeth | Gear Pitch Dia. | OD | Face Wd. | Overall Wd. | For Shaft Dia. | Material | Teeth Heat Treatment | Dia. | Wd. | Wd. | Dp. | Set Screw Thread Size | Each | |
Round Bore | |||||||||||||||
| 12 | 16 | 1.333" | 1.5" | 3/4" | 1.25" | 5/8" | 1144 Carbon Steel | Not Hardened | 1.063" | 0.5" | __ | __ | __ | 0000000 | 000000 |
Round/Machinable Bore | |||||||||||||||
| 20 | 24 | 1.2" | 1.3" | 3/8" | 0.75" | 3/8"-9/16" | 1144 Carbon Steel | Hardened | 1.063" | 0.375" | __ | __ | __ | 00000000 | 00000 |
| 20 | 24 | 1.2" | 1.3" | 3/8" | 0.75" | 3/8"-9/16" | 1144 Carbon Steel | Not Hardened | 1.063" | 0.375" | __ | __ | __ | 0000000 | 00000 |
| 16 | 20 | 1 1/4" | 1.38" | 1/2" | 0.938" | 1/2"-9/16" | 1144 Carbon Steel | Hardened | 1.063" | 0.438" | __ | __ | __ | 00000000 | 00000 |
| 16 | 20 | 1 1/4" | 1.38" | 1/2" | 0.938" | 1/2"-9/16" | 1144 Carbon Steel | Not Hardened | 1.063" | 0.438" | __ | __ | __ | 0000000 | 00000 |
Keyed Bore with Set Screw | |||||||||||||||
| 20 | 24 | 1.2" | 1.3" | 3/8" | 0.75" | 3/8" | 1144 Carbon Steel | Not Hardened | 1.063" | 0.375" | 0.094" | 0.047" | 1/4"-20 | 0000000 | 00000 |
| 16 | 20 | 1 1/4" | 1.38" | 1/2" | 0.938" | 1/2" | 1144 Carbon Steel | Not Hardened | 1.063" | 0.438" | 0.125" | 0.063" | 1/4"-20 | 0000000 | 00000 |
| 12 | 16 | 1.333" | 1.5" | 3/4" | 1.25" | 5/8" | 1144 Carbon Steel | Not Hardened | 1.063" | 0.5" | 0.188" | 0.094" | 1/4"-20 | 0000000 | 00000 |