About Gears
More
MXL Series Lightweight Timing Belt Pulleys
Made from polycarbonate, these pulleys are useful in applications with weight constraints. All are MXL series (miniature extra light) and have trapezoidal teeth. The teeth match up with the grooves along the inside diameter of a timing belt in order to move components forward or backward. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
2 Flanges | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Number of Teeth | Pitch | For Shaft Dia. | Bore Type | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Fabrication | Material | Hub Dia. | Each | |
For 1/4" Max. Belt Wd. | |||||||||||||
| 0.78" | 24 | 0.080" | 3/16" | Finished | 0.28" | 0.438" | 0.688" | 0.611" | Molded | Polycarbonate | 0.5" | 0000000 | 00000 |
Metal Gears and Gear Racks—20° Pressure Angle
The current industry standard, these 20° pressure angle gears have thicker, stronger teeth than 14½° pressure angle gears. Compared to plastic gears and racks, they’re better for high-load, high-speed, and heavy duty applications. Also known as spur gears.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion. To minimize your footprint, mount one or more standard gears inside of an internal gear.
For components to mesh correctly, they must have the same pressure angle and pitch/module.
Gears with teeth that are not hardened can be hardened to fit your application.
Stainless steel gears and racks resist rust in damp and wet environments, so they're commonly used in food-processing plants and other areas with frequent cleaning.
For technical drawings and 3-D models, click on a part number.
Hub | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gear Pitch | Number of Teeth | Gear Pitch Dia. | OD | Face Wd. | Overall Wd. | For Shaft Dia. | Material | Teeth Heat Treatment | Dia. | Wd. | Set Screw Thread Size | Each | |
Round Bore with Set Screw | |||||||||||||
| 64 | 48 | 3/4" | 0.78" | 3/16" | 0.437" | 1/4" | 303 Stainless Steel | Not Hardened | 0.5" | 0.25" | 6-32 | 0000000 | 000000 |