About Gears
More
High-Power Metal Gears
and Crossed Left-Hand
Gear (Sold Separately)
with Right-Hand
Teeth (Sold Separately)
The helical teeth on these gears stay in contact for longer than straight teeth, which allows them to transmit higher loads at higher speeds than spur gears.
For gears to mesh correctly, they must have the same pressure angle and pitch. All of these gears transmit motion in a straight line—make sure to get one left-hand and one right-hand gear. To change speed and torque in your assembly, pair two gears with different numbers of teeth.
Crossed helical gears, also known as screw gears, can be configured to transmit motion at a 90° angle. To transmit motion at a 90° angle, pair two gears with the same tooth direction. To avoid wearing down gears, which happens when you use the same material, we recommend mating gears with different materials. Made from carbon steel, these gears are strong, but not as strong as alloy steel gears.
Gears with hardened teeth have better wear resistance than gears with teeth that are not hardened.
For technical drawings and 3-D models, click on a part number.
Hub | Keyway | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Pitch | Number of Teeth | Helix Angle | Gear Pitch Dia. | OD | Face Wd. | Overall Wd. | For Shaft Dia. | Teeth Heat Treatment | Dia. | Wd. | Wd. | Dp. | Set Screw Thread Size | Each | |
Left Hand | |||||||||||||||
Keyed Bore with Set Screw—1137 Carbon Steel | |||||||||||||||
16 | 24 | 45° | 1 1/2" | 1.59" | 1/2" | 1" | 5/8" | Hardened | 1.37" | 0.5" | 0.187" | 0.094" | 1/4"-20 | 0000000 | 000000 |
Right Hand | |||||||||||||||
Keyed Bore with Set Screw—1137 Carbon Steel | |||||||||||||||
16 | 24 | 45° | 1 1/2" | 1.59" | 1/2" | 1" | 5/8" | Hardened | 1.37" | 0.5" | 0.187" | 0.094" | 1/4"-20 | 0000000 | 00000 |
Metal Miter Gears
With straight, conically shaped teeth and a 1:1 speed ratio, miter gears connect two shafts at an angle without changing shaft speed or torque. They're more efficient than spiral miter gears because they create less friction.
For two gears to mesh correctly, they must have the same pressure angle, shaft angle, pitch/module, and number of teeth.
Carbon steel gears have hard, strong, and wear-resistant teeth. They’re best for heavy duty and high-torque applications, such as lifting equipment. However, these gears will rust when exposed to moisture or corrosive chemicals. Some gears have hardened teeth for additional wear resistance; gears with teeth that are not hardened can be hardened to fit your application.
For technical drawings and 3-D models, click on a part number.
Hub | Keyway | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Pitch | Number of Teeth | For Shaft Angle | Pressure Angle | Gear Pitch Dia. | OD | Face Wd. | Overall Wd. | For Shaft Dia. | Mounting Distance | Teeth Heat Treatment | Dia. | Wd. | Wd. | Dp. | Set Screw Thread Size | Each | |
Round Bore—1144 Carbon Steel | |||||||||||||||||
16 | 24 | 90° | 20° | 1 1/2" | 1.59" | 0.31" | 0.875" | 1/2" | 1.375" | Not Hardened | 1" | 0.5" | __ | __ | __ | 0000000 | 000000 |
Keyed Bore with Set Screw—1144 Carbon Steel | |||||||||||||||||
16 | 24 | 90° | 20° | 1 1/2" | 1.59" | 0.31" | 0.875" | 1/2" | 1.375" | Hardened | 1" | 0.5" | 0.125" | 0.063" | 10-24 | 0000000 | 00000 |