About Gears
More
MXL Series Lightweight Timing Belt Pulleys
Made from polycarbonate, these pulleys are useful in applications with weight constraints. All are MXL series (miniature extra light) and have trapezoidal teeth. The teeth match up with the grooves along the inside diameter of a timing belt in order to move components forward or backward. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
2 Flanges | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD | Number of Teeth | Pitch | For Shaft Dia. | Bore Type | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Fabrication | Material | Hub Dia. | Each | |
For 6 mm Max. Belt Wd. | |||||||||||||
14mm | 15 | 2.030mm | 4mm | Finished | 9.5mm | 15.9mm | 17.5mm | 9.7mm | Molded | Polycarbonate | 11mm | 0000000 | 000000 |
Metal Worms and Worm Gears
Worm gears use screw threads to make large reductions to shaft speed while transmitting motion at a right angle. They transmit motion from worm to gear and cannot be reversed. For gears and worms to mesh correctly, they must have the same pressure angle and pitch/module. These worms are compatible with plastic worm gears.
Speed ratio is the ratio by which output shaft speed is reduced. As speed decreases, torque increases.
4140 alloy steel worms are already mounted on a shaft, so they’re ready to use with no machining required. The threads are ground into the shaft for higher precision than rolled threads, and hardened for additional durability and precision.
For technical drawings and 3-D models, click on a part number.
Plastic Gears and Gear Racks—20° Pressure Angle
The current industry standard, these 20° pressure angle gears have thicker, stronger teeth than 14½° pressure angle gears. Made of plastic, they run quieter than metal gears and have good corrosion and chemical resistance. They’re also known as spur gears.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion.
For components to mesh correctly, they must have the same pressure angle and pitch/module.
Acetal gears are best suited for use in light duty machines or for prototyping.
For technical drawings and 3-D models, click on a part number.
Hub | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Module | Number of Teeth | Gear Pitch Dia., mm | OD, mm | Face Wd., mm | Overall Wd., mm | For Shaft Dia., mm | Material | Fabrication | Color | Dia., mm | Wd., mm | Each | |
Round Bore | |||||||||||||
1 | 12 | 12 | 14 | 6 | 12 | 4 | Acetal Plastic | Molded | White | 8 | 6 | 00000000 | 00000 |