Move heavy loads without slippage—pulleys mount with quick-disconnect (QD) bushings (sold separately) for a more secure grip on the shaft than set screws. Bushing is not included. Pulleys are H series (heavy) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.

For technical drawings and 3-D models, click on a part number.

Add these free-spinning pulleys to your timing belt setup to minimize vibration and keep belts from wearing out. The needle bearing at the center of these pulleys is lined with small, cylindrical rollers that reduce friction as they rotate. This bearing allows both the pulley and the shaft it’s mounted on to spin independently. Made from iron or steel, these pulleys are strong and wear-resistant. The black oxide coating protects the pulleys from corrosion in dry environments.

Trapezoidal teeth on the outside of the pulley fit into teeth inside your timing belt—select a pulley that matches your belt trade size. The maximum belt width should be the same size or larger than the width of your timing belt.

For technical drawings and 3-D models, click on a part number.

A former industry standard, 14½° pressure angle gears are often found on older machinery. Made of carbon steel, they have high strength and are better than plastic gears and gear racks for high-load, high-speed, and heavy duty applications.

Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion.

For components to mesh correctly, they must have the same pressure angle and pitch.

Gears with machinable bore have a large hub diameter so you can machine them to fit your shaft.

Gears with teeth that are not hardened can be hardened to fit your application. Hardening a gear's teeth increases its wear resistance.

For technical drawings and 3-D models, click on a part number.