About Gears
More
L Series Quick-Disconnect Timing Belt Pulleys
Carry heavy loads without slippage—pulleys mount with quick-disconnect (QD) bushings (sold separately) for a more secure grip on the shaft than set screws. Bushing is not included. Pulleys are L series (light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
OD | Number of Teeth | Pitch | ID | Bore Type | For Bushing Style | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Number of Flanges | Fabrication | Material | Each | |
For 1/2" Max. Belt Wd. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2.63" | 20 | 0.375" | 1.375" | Finished | Quick Disconnect Style JA | 0.563" | 0.75" | 0.75" | 2.387" | 2 | Sintered | Steel | 00000000 | 000000 |
For 3/4" Max. Belt Wd. | ||||||||||||||
2.63" | 20 | 0.375" | 1.375" | Finished | Quick Disconnect Style JA | 0.813" | 1" | 1" | 2.387" | 2 | Sintered | Steel | 00000000 | 00000 |
For 1" Max. Belt Wd. | ||||||||||||||
2.63" | 20 | 0.375" | 1.375" | Finished | Quick Disconnect Style JA | 1.063" | 1.25" | 1.25" | 2.387" | 2 | Sintered | Steel | 00000000 | 00000 |
Metal Gears and Gear Racks—14 1/2° Pressure Angle
A former industry standard, 14½° pressure angle gears are often found on older machinery. Made of carbon steel, they have high strength and are better than plastic gears and gear racks for high-load, high-speed, and heavy duty applications.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion.
For components to mesh correctly, they must have the same pressure angle and pitch.
Gears with machinable bore have a large hub diameter so you can machine them to fit your shaft.
Gears with teeth that are not hardened can be hardened to fit your application. Hardening a gear's teeth increases its wear resistance.
For technical drawings and 3-D models, click on a part number.
Hub | Keyway | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Pitch | Number of Teeth | Gear Pitch Dia. | OD | Face Wd. | Overall Wd. | For Shaft Dia. | Material | Teeth Heat Treatment | Dia. | Wd. | Wd. | Dp. | Set Screw Thread Size | Each | |
Round/Machinable Bore | |||||||||||||||
16 | 40 | 2 1/2" | 2.63" | 1/2" | 1" | 1/2"-1 1/4" | 1144 Carbon Steel | Not Hardened | 2" | 0.5" | __ | __ | __ | 0000000 | 000000 |
Keyed Bore with Set Screw | |||||||||||||||
16 | 40 | 2 1/2" | 2.63" | 1/2" | 1" | 1/2" | 1144 Carbon Steel | Not Hardened | 2" | 0.5" | 0.125" | 0.063" | 10-24 | 0000000 | 000000 |