L Series Corrosion-Resistant Timing Belt Pulleys
Pulleys are anodized aluminum, which is more corrosion resistant than steel. All are L series (light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
OD | Number of Teeth | Pitch | For Shaft Dia. | Bore Type | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Number of Flanges | Fabrication | Material | Hub Dia. | Each | |
For 1/2" Max. Belt Wd. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3.094" | 24 | 0.375" | 1/2" | Finished | 0.55" | 0.719" | 1.375" | 2.865" | 2 | Machined | Anodized Aluminum | 2.25" | 0000000 | 000000 |
For 3/4" Max. Belt Wd. | ||||||||||||||
3.094" | 24 | 0.375" | 1/2" | Finished | 0.83" | 1" | 1.5" | 2.865" | 2 | Machined | Anodized Aluminum | 2.25" | 0000000 | 00000 |
For 1" Max. Belt Wd. | ||||||||||||||
3.094" | 24 | 0.375" | 1/2" | Finished | 1.08" | 1.25" | 1.75" | 2.865" | 2 | Machined | Anodized Aluminum | 2.25" | 0000000 | 00000 |
L Series Quick-Disconnect Timing Belt Pulleys
Carry heavy loads without slippage—pulleys mount with quick-disconnect (QD) bushings (sold separately) for a more secure grip on the shaft than set screws. Bushing is not included. Pulleys are L series (light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
OD | Number of Teeth | Pitch | ID | Bore Type | For Bushing Style | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Number of Flanges | Fabrication | Material | Each | |
For 1/2" Max. Belt Wd. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3.094" | 24 | 0.375" | 1.871" | Finished | Quick Disconnect Style SH | 0.563" | 0.75" | 0.75" | 2.865" | 2 | Sintered | Steel | 00000000 | 000000 |
For 3/4" Max. Belt Wd. | ||||||||||||||
3.094" | 24 | 0.375" | 1.871" | Finished | Quick Disconnect Style SH | 0.813" | 1" | 1" | 2.865" | 2 | Sintered | Steel | 00000000 | 00000 |
For 1" Max. Belt Wd. | ||||||||||||||
3.094" | 24 | 0.375" | 1.871" | Finished | Quick Disconnect Style SH | 1.063" | 1.25" | 1.25" | 2.865" | 2 | Sintered | Steel | 00000000 | 00000 |