About Roller Chain and Sprockets
More
Sprockets for ANSI Roller Chain
Mount these sprockets onto your shaft and secure with a set screw—no machining necessary.
For technical drawings and 3-D models, click on a part number.
Keyway | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Number of Teeth | For Shaft Dia. | OD | Overall Wd. | Hub Dia. | Wd. | Dp. | Material | Includes | Each | |
15 | 3/4" | 3.98" | 1 1/4" | 2 7/8" | 3/16" | 3/32" | Steel | Two Set Screws | 0000000 | 000000 |
15 | 7/8" | 3.98" | 1 1/4" | 2 7/8" | 3/16" | 3/32" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1" | 3.98" | 1 1/4" | 2 7/8" | 1/4" | 1/8" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 1/8" | 3.98" | 1 1/4" | 2 7/8" | 1/4" | 1/8" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 3/16" | 3.98" | 1 1/4" | 2 7/8" | 1/4" | 1/8" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 1/4" | 3.98" | 1 1/4" | 2 7/8" | 1/4" | 1/8" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 3/8" | 3.98" | 1 1/4" | 2 7/8" | 5/16" | 5/32" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 7/16" | 3.98" | 1 1/4" | 2 7/8" | 3/8" | 3/16" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 1/2" | 3.98" | 1 1/4" | 2 7/8" | 3/8" | 3/16" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 5/8" | 3.98" | 1 1/4" | 2 7/8" | 3/8" | 3/16" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 3/4" | 3.98" | 1 1/4" | 2 7/8" | 3/8" | 3/16" | Steel | Two Set Screws | 00000000 | 00000 |
Machinable-Bore Sprockets for ANSI Roller Chain
For a custom fit on your shaft, these sprockets can be machined to your exact specifications. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.
For technical drawings and 3-D models, click on a part number.
Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 60 Roller Chain (3/4" Pitch) | ||||||||
---|---|---|---|---|---|---|---|---|
15 | 3/4" | 1 7/8" | 3.98" | 1 1/4" | 2 7/8" | Steel | 00000000 | 000000 |
Wear-Resistant Sprockets for ANSI Roller Chain
Hardened teeth give these steel sprockets increased wear resistance for a long service life. Mount them onto your shaft and secure with a set screw—no machining necessary.
For technical drawings and 3-D models, click on a part number.
Keyway | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Number of Teeth | For Shaft Dia. | OD | Overall Wd. | Hub Dia. | Wd. | Dp. | Material | Includes | Each | |
15 | 3/4" | 3.98" | 1 1/4" | 2 7/8" | 3/16" | 3/32" | Steel | Two Set Screws | 00000000 | 000000 |
15 | 7/8" | 3.98" | 1 1/4" | 2 7/8" | 3/16" | 3/32" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1" | 3.98" | 1 1/4" | 2 7/8" | 1/4" | 1/8" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 1/8" | 3.98" | 1 1/4" | 2 7/8" | 1/4" | 1/8" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 3/16" | 3.98" | 1 1/4" | 2 7/8" | 1/4" | 1/8" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 1/4" | 3.98" | 1 1/4" | 2 7/8" | 1/4" | 1/8" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 3/8" | 3.98" | 1 1/4" | 2 7/8" | 5/16" | 5/32" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 7/16" | 3.98" | 1 1/4" | 2 7/8" | 3/8" | 3/16" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 1/2" | 3.98" | 1 1/4" | 2 7/8" | 3/8" | 3/16" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 5/8" | 3.98" | 1 1/4" | 2 7/8" | 3/8" | 3/16" | Steel | Two Set Screws | 00000000 | 00000 |
15 | 1 3/4" | 3.98" | 1 1/4" | 2 7/8" | 3/8" | 3/16" | Steel | Two Set Screws | 00000000 | 00000 |
Machinable-Bore Corrosion-Resistant Sprockets for ANSI Roller Chain
For a custom fit on your shaft, these sprockets can be machined to your exact specifications. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size. Made of stainless steel, they withstand washdown conditions and harsh environments.
For technical drawings and 3-D models, click on a part number.
Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 60 Roller Chain (3/4" Pitch) | ||||||||
---|---|---|---|---|---|---|---|---|
15 | 3/4" | 1 7/8" | 3.98" | 1 1/4" | 2 7/8" | 18-8 Stainless Steel | 00000000 | 0000000 |
Flat Sprockets for ANSI Roller Chain
Also known as A-plate sprockets, these have a slim profile that fits in narrow spaces. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.
For technical drawings and 3-D models, click on a part number.
Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Material | Each | |
For ANSI 60 Roller Chain (3/4" Pitch) | |||||||
---|---|---|---|---|---|---|---|
15 | 3/4" | 2 3/4" | 3.98" | 15/32" | Steel | 0000000 | 000000 |
Sprockets for Double-Strand ANSI Roller Chain
These sprockets come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size. All have hardened teeth for increased wear resistance and a long service life.
For technical drawings and 3-D models, click on a part number.
Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 60-2 Roller Chain (3/4" Pitch) | ||||||||
---|---|---|---|---|---|---|---|---|
15 | 1" | 1 7/8" | 3.98" | 2 1/8" | 2 13/16" | Steel | 0000000 | 0000000 |
Idler Sprockets for ANSI Roller Chain
Maintain constant tension on your drive with these sprockets that press against your chain to take up slack and reduce wear and vibration. They rotate freely on built-in bearings and are for use with roller chain tensioners. Bearings are double sealed to keep dirt out.
For technical drawings and 3-D models, click on a part number.
Wear-Resistant Idler Sprockets for ANSI Roller Chain
Hardened teeth give these steel sprockets increased wear resistance for a long service life. Designed to rotate freely on built-in bearings, idler sprockets maintain constant tension on your drive by pressing against your chain to take up slack and reduce wear and vibration. They are for use with roller chain tensioners.
Ball bearings are double sealed to keep dirt out.
Bearing | |||||||||
---|---|---|---|---|---|---|---|---|---|
Number of Teeth | For Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Type | Material | Each | |
For ANSI 60 Roller Chain (3/4" Pitch) | |||||||||
15 | 5/8" | 3.98" | 23/32" | 1 9/16" | Steel | Ball | Steel | 00000000 | 000000 |
Wide-Hub Idler Sprockets for ANSI Roller Chain
A wide hub provides these sprockets with stability under heavy loads. Designed to rotate freely on built-in bearings, idler sprockets maintain constant tension on your drive by pressing against your chain to take up slack and reduce wear and vibration. They are for use with roller chain tensioners. Bearings are self-lubricating.
For technical drawings and 3-D models, click on a part number.
Bearing | |||||||||
---|---|---|---|---|---|---|---|---|---|
Number of Teeth | For Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Type | Material | Each | |
For ANSI 60 Roller Chain (3/4" Pitch) | |||||||||
15 | 7/8" | 3.98" | 1 1/16" | 2 5/8" | Steel | Sleeve | Bronze | 0000000 | 000000 |
Idler Sprockets for Double-Strand ANSI Roller Chain
Maintain constant tension on your drive with these sprockets that press against your chain to take up slack and reduce wear and vibration. They rotate freely on built-in bearings and are for use with roller chain tensioners. Bearings are double sealed to keep dirt out.
For technical drawings and 3-D models, click on a part number.
Quick-Disconnect (QD) Bushing-Bore Sprockets for ANSI Roller Chain
The same sprocket can be used with different shaft diameters; choose a compatible quick-disconnect bushing with the bore size you need.
For technical drawings and 3-D models, click on a part number.
Number of Teeth | For Bushing Style | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 60 Roller Chain (3/4" Pitch) | |||||||
---|---|---|---|---|---|---|---|
15 | SH | 3.98" | 13/16" | 2 11/16" | Steel | 00000000 | 000000 |
Split-Tapered Bushing-Bore Sprockets for ANSI Roller Chain
Since these sprockets grip bushings more tightly than taper-lock sprockets, they’re often used in high-torque applications. The same sprocket can be used with different shaft diameters; choose a compatible split-tapered bushing with the bore size you need.
Sprockets for P1- and Q1-Style bushings have a keyway that fits a matching key on the bushing.
For technical drawings and 3-D models, click on a part number.
Number of Teeth | For Bushing Style | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 60 Roller Chain (3/4" Pitch) | |||||||
---|---|---|---|---|---|---|---|
15 | P1 | 3.98" | 1 5/16" | 3" | Steel | 0000000 | 0000000 |