About Roller Chain and Sprockets
More
About Gears
More
Sprockets for Metric Roller Chain
Designed to meet ISO 606 and DIN 8187 international dimensional standards, these sprockets are for use with compatible ISO and DIN roller chain. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.
For technical drawings and 3-D models, click on a part number.
| Number of Teeth | For Shaft Dia., mm | For Max. Shaft Dia., mm | OD, mm | Overall Wd., mm | Hub Dia., mm | Material | Specifications Met | Each | |
For ISO 05B Roller Chain (8 mm Pitch) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 22 | 8 | 25 | 60 | 14 | 35 | Steel | DIN 8187, ISO 606 | 0000000 | 000000 |
Flush-Mount Screw-Clamp Bushings
Insert these bushings into the bore of your sprocket for flush or recessed mounting. They handle shock loads. When you tighten the included clamping screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.
For technical drawings and 3-D models, click on a part number.
Metal Gears and Gear Racks—20° Pressure Angle
The current industry standard, these 20° pressure angle gears have thicker, stronger teeth than 14½° pressure angle gears. Compared to plastic gears and racks, they’re better for high-load, high-speed, and heavy duty applications. Also known as spur gears.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion. To minimize your footprint, mount one or more standard gears inside of an internal gear.
For components to mesh correctly, they must have the same pressure angle and pitch/module.
Gears with teeth that are not hardened can be hardened to fit your application.
Stainless steel gears and racks resist rust in damp and wet environments, so they're commonly used in food-processing plants and other areas with frequent cleaning.
For technical drawings and 3-D models, click on a part number.
Hub | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Module | Number of Teeth | Gear Pitch Dia., mm | OD, mm | Face Wd., mm | Overall Wd., mm | For Shaft Dia., mm | Material | Teeth Heat Treatment | Dia., mm | Wd., mm | Each | |
Round Bore | ||||||||||||
| 2 | 28 | 56 | 60 | 20 | 36 | 12 | 303 Stainless Steel | Not Hardened | 45 | 16 | 00000000 | 0000000 |
Plastic Gears and Gear Racks—20° Pressure Angle
The current industry standard, these 20° pressure angle gears have thicker, stronger teeth than 14½° pressure angle gears. Made of plastic, they run quieter than metal gears and have good corrosion and chemical resistance. They’re also known as spur gears.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion.
For components to mesh correctly, they must have the same pressure angle and pitch/module.
Nylon gears can be operated without lubrication, so they’re commonly used in food-processing machines.
For technical drawings and 3-D models, click on a part number.
Hub | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Module | Number of Teeth | Gear Pitch Dia., mm | OD, mm | Face Wd., mm | Overall Wd., mm | For Shaft Dia., mm | Material | Fabrication | Color | Dia., mm | Wd., mm | Each | |
Round Bore | |||||||||||||
| 2 | 28 | 56 | 60 | 20 | 30 | 10 | Nylon Plastic | Machined | Blue | 45 | 10 | 00000000 | 000000 |
Metal Ratcheting Gears
Compared to plastic gears, these metal ratcheting gears are better for high-load, high-speed, and heavy duty applications. Used to prevent unwanted motion in jacks, tie downs, clutches, and winches, ratchet gears have sloped teeth that allow motion in one direction and prevent it in the other.
Gears with hardened teeth are more wear resistant than gears with teeth that are not hardened.
For technical drawings and 3-D models, click on a part number.
Hub | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Face Wd. | Number of Teeth | OD | For Shaft Dia. | Mounting Distance | Material | Teeth Heat Treatment | Overall Wd. | Dia. | Wd. | Each | |
Round Bore | |||||||||||
| 12mm | 60 | 60mm | 15mm | 48.2mm | 1045 Carbon Steel | Hardened | 12 mm | __ | __ | 0000000 | 000000 |
| 12mm | 60 | 60mm | 15mm | 48.2mm | 1045 Carbon Steel | Hardened | 24 mm | 40 mm | 12 mm | 0000000 | 00000 |
| 15mm | 30 | 60mm | 15mm | 61.2mm | 1045 Carbon Steel | Hardened | 15 mm | __ | __ | 0000000 | 00000 |