About Gears
More
XL Series Corrosion-Resistant Timing Belt Pulleys
Pulleys are anodized aluminum, which is more corrosion resistant than steel. They are XL series (extra light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
OD, mm | Number of Teeth | Pitch, mm | For Shaft Dia., mm | Bore Type | Inside Wd., mm | Outside Wd., mm | Overall Wd., mm | Pitch Dia., mm | Fabrication | Material | Hub Dia., mm | Each | |
For 9.5 mm Max. Belt Wd. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
With Hub—Two Flanges | |||||||||||||
22 | 10 | 5.080 | 6 | Finished | 11.2 | 14.2 | 20.6 | 16.2 | Machined | Anodized Aluminum | 10 | 00000000 | 000000 |
24 | 11 | 5.080 | 6 | Finished | 11.2 | 14.2 | 20.6 | 17.8 | Machined | Anodized Aluminum | 11 | 00000000 | 00000 |
25 | 12 | 5.080 | 6 | Finished | 11.2 | 14.2 | 20.6 | 19.4 | Machined | Anodized Aluminum | 13 | 00000000 | 00000 |
28 | 14 | 5.080 | 8 | Finished | 11.2 | 14.2 | 20.6 | 22.6 | Machined | Anodized Aluminum | 14 | 00000000 | 00000 |
30 | 15 | 5.080 | 8 | Finished | 11.2 | 14.2 | 20.6 | 24.3 | Machined | Anodized Aluminum | 16 | 00000000 | 00000 |
32 | 16 | 5.080 | 8 | Finished | 11.2 | 14.2 | 20.6 | 25.9 | Machined | Anodized Aluminum | 17 | 00000000 | 00000 |
35 | 18 | 5.080 | 8 | Finished | 11.2 | 14.2 | 20.6 | 29.1 | Machined | Anodized Aluminum | 21 | 00000000 | 00000 |
MXL Series Corrosion-Resistant Timing Belt Pulleys
Anodized aluminum has good corrosion resistance. Pulleys are MXL series (miniature extra light) and have trapezoidal teeth. The teeth match up with the grooves along the inside diameter of a timing belt in order to move components forward or backward. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
OD | Number of Teeth | Pitch | For Shaft Dia. | Bore Type | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Number of Flanges | Fabrication | Material | Hub Dia. | Each | |
For 9 mm Max. Belt Wd. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
24mm | 30 | 2.030mm | 6mm | Finished | 10.4mm | 13.1mm | 20.6mm | 19.4mm | 2 | Machined | Anodized Aluminum | 13.9mm | 00000000 | 000000 |
25.4mm | 32 | 2.030mm | 6mm | Finished | 10.4mm | 13.1mm | 20.6mm | 20.7mm | 2 | Machined | Anodized Aluminum | 15.2mm | 00000000 | 00000 |
Plastic Miter Gears
Connect two shafts at a right angle without changing shaft speed or torque. Made of plastic, these gears run quieter than metal gears and have good corrosion and chemical resistance.
For two gears to mesh correctly, they must have the same pressure angle, pitch/module, and number of teeth.
Acetal gears absorb less moisture than nylon gears and are less prone to dimensional change. They’re best suited for use in light duty applications such as prototyping.
For technical drawings and 3-D models, click on a part number.
Hub | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Module | Number of Teeth | Pressure Angle | Gear Pitch Dia. | OD, mm | Face Wd., mm | Overall Wd., mm | For Shaft Dia., mm | Mounting Distance, mm | Material | Fabrication | Color | Dia., mm | Wd., mm | Each | |
Round Bore | |||||||||||||||
1.5 | 20 | 20° | 30mm | 32.1 | 7 | 20.6 | 8 | 30 | Acetal Plastic | Molded | White | 20 | 10 | 000000 | 00000 |