Component Component |
---|
![]() | Gear |
Material Material |
---|
|
Gear Type Gear Type |
---|
![]() | Miter |
Mounting Distance Mounting Distance |
---|

|
|
|
Speed Ratio Speed Ratio |
---|
|
Overall Width Overall Width |
---|

|
|
Bore Type Bore Type |
---|
![]() | Round |
Pressure Angle Pressure Angle |
---|
|
Fabrication Fabrication |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
About Gears
More
Plastic Miter Gears

Gears Sold Separately
Connect two shafts at a right angle without changing shaft speed or torque. Made of plastic, these gears run quieter than metal gears and have good corrosion and chemical resistance.
For two gears to mesh correctly, they must have the same pressure angle, pitch/module, and number of teeth.
Nylon gears are self-lubricating, so they’re often used in food machinery. However, they’re not approved for direct contact with food or chemicals that will come into contact with food.
Acetal gears absorb less moisture than nylon gears and are less prone to dimensional change. They’re best suited for use in light duty applications such as prototyping.
For technical drawings and 3-D models, click on a part number.
Inch Gears


Hub | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Pitch | Number of Teeth | Pressure Angle | Gear Pitch Dia. | OD | Face Wd. | Overall Wd. | For Shaft Dia. | Mounting Distance | Material | Fabrication | Color | Dia. | Wd. | Each | |
Round Bore | |||||||||||||||
48 | 18 | 20° | 3/8" | 0.4" | 0.05" | 0.264" | 1/8" | 0.406" | Nylon Plastic | Molded | White | 0.328" | 0.188" | 0000000 | 00000 |
48 | 24 | 20° | 1/2" | 0.53" | 0.09" | 0.375" | 3/16" | 0.531" | Nylon Plastic | Molded | White | 0.375" | 0.25" | 0000000 | 0000 |
32 | 16 | 20° | 1/2" | 0.55" | 0.11" | 0.344" | 3/16" | 0.5" | Nylon Plastic | Molded | White | 0.406" | 0.188" | 0000000 | 0000 |
32 | 24 | 20° | 3/4" | 0.8" | 0.16" | 0.406" | 3/16" | 0.688" | Nylon Plastic | Molded | White | 0.5" | 0.188" | 0000000 | 00000 |
24 | 24 | 20° | 1" | 1.05" | 0.26" | 0.563" | 1/4" | 0.875" | Nylon Plastic | Molded | White | 0.625" | 0.188" | 0000000 | 0000 |
24 | 30 | 20° | 1 1/4" | 1.31" | 0.19" | 0.578" | 1/4" | 1.031" | Nylon Plastic | Molded | White | 0.625" | 0.313" | 0000000 | 0000 |
24 | 36 | 20° | 1 1/2" | 1.56" | 0.21" | 0.609" | 5/16" | 1.188" | Nylon Plastic | Molded | White | 0.688" | 0.313" | 0000000 | 00000 |
16 | 16 | 20° | 1" | 1.09" | 0.22" | 0.75" | 3/8" | 1.063" | Nylon Plastic | Molded | White | 0.75" | 0.438" | 0000000 | 00000 |
Metric Gears


Hub | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Module | Number of Teeth | Pressure Angle | Gear Pitch Dia. | OD, mm | Face Wd., mm | Overall Wd., mm | For Shaft Dia., mm | Mounting Distance, mm | Material | Fabrication | Color | Dia., mm | Wd., mm | Each | |
Round Bore | |||||||||||||||
0.5 | 20 | 20° | 10mm | 10.7 | 2.5 | 8 | 3 | 11 | Acetal Plastic | Molded | White | 8 | 4 | 000000 | 00000 |
0.8 | 20 | 20° | 16mm | 17.1 | 3.5 | 10.8 | 5 | 16 | Acetal Plastic | Molded | White | 12 | 5 | 000000 | 0000 |
1 | 20 | 20° | 20mm | 21.4 | 4.5 | 14.6 | 6 | 21 | Acetal Plastic | Molded | White | 16 | 7 | 000000 | 0000 |
1 | 20 | 20° | 20mm | 21.4 | 5 | 14 | 6 | 20 | Nylon Plastic | Molded | Blue | 16 | 8 | 00000000 | 00000 |
1 | 25 | 20° | 25mm | 26.4 | 6 | 15 | 6 | 23 | Nylon Plastic | Molded | Blue | 20 | 8 | 00000000 | 00000 |
1.5 | 20 | 20° | 30mm | 32.1 | 7 | 20.6 | 8 | 30 | Acetal Plastic | Molded | White | 20 | 10 | 000000 | 0000 |
2 | 20 | 20° | 40mm | 42.8 | 10 | 25 | 10 | 37 | Nylon Plastic | Molded | Blue | 34 | 14 | 00000000 | 00000 |