Material Material | Show |
---|
|
Material Material | Hide |
---|
|
Diameter Diameter |
---|
Appearance Appearance |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Heat Treatment Heat Treatment |
---|
|
Yield Strength Yield Strength |
---|
|
Specifications Met Specifications Met |
---|
|
Heat Treatable Heat Treatable |
---|
|
Fabrication Fabrication |
---|
|
Mechanical Finish Mechanical Finish |
---|
|
More
These balls are hardened for increased wear and abrasion resistance. 440C is one of the hardest types of stainless steel after heat treating. It's often used for bearings and valves. This material maintains its corrosion resistance in temperatures up to 800° F.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Magnetic Properties | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
---|---|---|---|---|---|
3/64" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 00000 |
1/16" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 0000 |
5/64" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 0000 |
3/32" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 0000 |
7/64" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 0000 |
1/8" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 0000 |
9/64" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 0000 |
5/32" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 0000 |
11/64" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 00000 |
3/16" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 0000 |
7/32" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 00000 |
1/4" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 00000 |
9/32" | -0.0005" to 0.0005" | Magnetic | 50 | 0000000 | 0000 |
5/16" | -0.0005" to 0.0005" | Magnetic | 50 | 0000000 | 0000 |
11/32" | -0.0005" to 0.0005" | Magnetic | 50 | 0000000 | 00000 |
3/8" | -0.0005" to 0.0005" | Magnetic | 50 | 0000000 | 00000 |
7/16" | -0.0005" to 0.0005" | Magnetic | 25 | 0000000 | 00000 |
1/2" | -0.0005" to 0.0005" | Magnetic | 10 | 0000000 | 0000 |
9/16" | -0.0005" to 0.0005" | Magnetic | 10 | 0000000 | 0000 |
5/8" | -0.0005" to 0.0005" | Magnetic | 5 | 0000000 | 0000 |
11/16" | -0.0005" to 0.0005" | Magnetic | 5 | 0000000 | 0000 |
3/4" | -0.0005" to 0.0005" | Magnetic | 5 | 0000000 | 0000 |
13/16" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 0000 |
7/8" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 0000 |
15/16" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 0000 |
1" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 0000 |
1 1/16" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 0000 |
1 1/8" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 00000 |
1 3/16" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 00000 |
1 1/4" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 00000 |
1 3/8" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 00000 |
1 1/2" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 00000 |
2" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 00000 |
3" | -0.0005" to 0.0005" | Magnetic | 1 | 0000000 | 000000 |
1mm | -0.0025mm to 0.0025mm | Magnetic | 250 | 0000000 | 00000 |
1.5mm | -0.0025mm to 0.0025mm | Magnetic | 250 | 0000000 | 00000 |
2mm | -0.0025mm to 0.0025mm | Magnetic | 250 | 0000000 | 00000 |
2.5mm | -0.0025mm to 0.0025mm | Magnetic | 250 | 0000000 | 00000 |
3mm | -0.0025mm to 0.0025mm | Magnetic | 250 | 0000000 | 00000 |
3.5mm | -0.0025mm to 0.0025mm | Magnetic | 100 | 0000000 | 0000 |
4mm | -0.0025mm to 0.0025mm | Magnetic | 50 | 0000000 | 0000 |
5mm | -0.0025mm to 0.0025mm | Magnetic | 50 | 0000000 | 0000 |
6mm | -0.0025mm to 0.0025mm | Magnetic | 50 | 0000000 | 00000 |
7mm | -0.0025mm to 0.0025mm | Magnetic | 25 | 0000000 | 0000 |
8mm | -0.0025mm to 0.0025mm | Magnetic | 25 | 0000000 | 00000 |
9mm | -0.0025mm to 0.0025mm | Magnetic | 20 | 0000000 | 00000 |
10mm | -0.0025mm to 0.0025mm | Magnetic | 10 | 0000000 | 00000 |
12mm | -0.0025mm to 0.0025mm | Magnetic | 10 | 0000000 | 00000 |
13mm | -0.0025mm to 0.0025mm | Magnetic | 5 | 0000000 | 0000 |
14mm | -0.0025mm to 0.0025mm | Magnetic | 5 | 0000000 | 00000 |
15mm | -0.0025mm to 0.0025mm | Magnetic | 5 | 0000000 | 00000 |
16mm | -0.0025mm to 0.0025mm | Magnetic | 3 | 0000000 | 00000 |
18mm | -0.0025mm to 0.0025mm | Magnetic | 3 | 0000000 | 00000 |
24mm | -0.0025mm to 0.0025mm | Magnetic | 1 | 0000000 | 00000 |
With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance. 440C is one of the hardest types of stainless steel after heat treating. This material maintains its corrosion resistance in temperatures up to 800° F.
Balls have a reflective, mirror-like appearance.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Magnetic Properties | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
---|---|---|---|---|---|
1/16" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 00000 |
5/64" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 0000 |
3/32" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 0000 |
7/64" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 0000 |
1/8" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 0000 |
9/64" | -0.0001" to 0.0001" | Magnetic | 25 | 0000000 | 0000 |
5/32" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 0000 |
3/16" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 0000 |
7/32" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 00000 |
1/4" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 00000 |
17/64" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 00000 |
9/32" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 00000 |
5/16" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 00000 |
11/32" | -0.0001" to 0.0001" | Magnetic | 25 | 0000000 | 00000 |
3/8" | -0.0001" to 0.0001" | Magnetic | 10 | 0000000 | 0000 |
13/32" | -0.0001" to 0.0001" | Magnetic | 10 | 0000000 | 00000 |
7/16" | -0.0001" to 0.0001" | Magnetic | 10 | 0000000 | 00000 |
1/2" | -0.0001" to 0.0001" | Magnetic | 10 | 0000000 | 00000 |
9/16" | -0.0001" to 0.0001" | Magnetic | 5 | 0000000 | 0000 |
5/8" | -0.0001" to 0.0001" | Magnetic | 5 | 0000000 | 00000 |
11/16" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 0000 |
3/4" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 0000 |
13/16" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 0000 |
7/8" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 0000 |
15/16" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 00000 |
1" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 00000 |
1 1/16" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 00000 |
1 1/8" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 00000 |
1 1/4" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 00000 |
1 3/8" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 00000 |
1 1/2" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 00000 |
2" | -0.0001" to 0.0001" | Magnetic | 1 | 0000000 | 00000 |
440A stainless steel resists damage from impact and abrasion.
Balls are hollow. Use them in floats and ball valves. They maintain their corrosion resistance in temperatures up to 250° F.
Dia. | Dia. Tolerance | Mechanical Finish | Magnetic Properties | Each | |
Mirror-Like | |||||
---|---|---|---|---|---|
1" | -0.005" to 0.005" | Tumbled | Magnetic | 0000000 | 000000 |
This material has tighter tolerances than standard 304 stainless steel. From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Balls have a reflective, mirror-like finish.
Dia. | Dia. Tolerance | Fabrication | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
---|---|---|---|---|---|
1/16" | -0.0005" to 0.0005" | Cold Worked | 100 | 0000000 | 00000 |
3/32" | -0.0005" to 0.0005" | Cold Worked | 100 | 0000000 | 0000 |
1/8" | -0.0005" to 0.0005" | Cold Worked | 100 | 0000000 | 0000 |
5/32" | -0.0005" to 0.0005" | Cold Worked | 100 | 0000000 | 0000 |
3/16" | -0.0005" to 0.0005" | Cold Worked | 100 | 0000000 | 0000 |
7/32" | -0.0005" to 0.0005" | Cold Worked | 100 | 0000000 | 00000 |
1/4" | -0.0005" to 0.0005" | Cold Worked | 100 | 0000000 | 00000 |
9/32" | -0.0005" to 0.0005" | Cold Worked | 100 | 0000000 | 00000 |
5/16" | -0.0005" to 0.0005" | Cold Worked | 50 | 0000000 | 00000 |
11/32" | -0.0005" to 0.0005" | Cold Worked | 25 | 0000000 | 00000 |
3/8" | -0.0005" to 0.0005" | Cold Worked | 25 | 0000000 | 00000 |
7/16" | -0.0005" to 0.0005" | Cold Worked | 25 | 0000000 | 00000 |
1/2" | -0.0005" to 0.0005" | Cold Worked | 15 | 0000000 | 00000 |
5/8" | -0.0005" to 0.0005" | Cold Worked | 5 | 0000000 | 0000 |
3/4" | -0.0005" to 0.0005" | Cold Worked | 5 | 0000000 | 00000 |
1" | -0.0005" to 0.0005" | Cold Worked | 1 | 0000000 | 00000 |
1 1/4" | -0.001" to 0.001" | Cold Worked | 1 | 0000000 | 00000 |
1 1/2" | -0.001" to 0.001" | Cold Worked | 1 | 0000000 | 00000 |
1 3/4" | -0.001" to 0.001" | Cold Worked | 1 | 0000000 | 00000 |
2" | -0.001" to 0.001" | Cold Worked | 1 | 0000000 | 00000 |
2.5mm | -0.0127mm to 0.0127mm | Cold Worked | 250 | 0000000 | 0000 |
3mm | -0.0127mm to 0.0127mm | Cold Worked | 250 | 0000000 | 0000 |
3.5mm | -0.0127mm to 0.0127mm | Cold Worked | 100 | 0000000 | 0000 |
4mm | -0.0127mm to 0.0127mm | Cold Worked | 50 | 0000000 | 0000 |
5mm | -0.0127mm to 0.0127mm | Cold Worked | 50 | 0000000 | 0000 |
6mm | -0.0127mm to 0.0127mm | Cold Worked | 50 | 0000000 | 00000 |
7mm | -0.0127mm to 0.0127mm | Cold Worked | 25 | 0000000 | 0000 |
8mm | -0.0127mm to 0.0127mm | Cold Worked | 25 | 0000000 | 00000 |
10mm | -0.0127mm to 0.0127mm | Cold Worked | 10 | 0000000 | 0000 |
12mm | -0.0127mm to 0.0127mm | Cold Worked | 10 | 0000000 | 00000 |
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance up to the maximum temperature.
Balls have a reflective, mirror-like finish.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Mechanical Finish | Appearance | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||
---|---|---|---|---|---|---|
Inch | ||||||
1/16" | -0.001" to 0.001" | Tumbled | Mirror-Like | 100 | 00000000 | 00000 |
3/32" | -0.001" to 0.001" | Tumbled | Mirror-Like | 100 | 00000000 | 0000 |
1/8" | -0.001" to 0.001" | Tumbled | Mirror-Like | 100 | 00000000 | 0000 |
5/32" | -0.001" to 0.001" | Tumbled | Mirror-Like | 100 | 00000000 | 00000 |
3/16" | -0.001" to 0.001" | Tumbled | Mirror-Like | 100 | 00000000 | 00000 |
7/32" | -0.001" to 0.001" | Tumbled | Mirror-Like | 50 | 00000000 | 0000 |
1/4" | -0.001" to 0.001" | Tumbled | Mirror-Like | 50 | 00000000 | 00000 |
5/16" | -0.001" to 0.001" | Tumbled | Mirror-Like | 25 | 00000000 | 0000 |
3/8" | -0.001" to 0.001" | Tumbled | Mirror-Like | 10 | 00000000 | 0000 |
7/16" | -0.001" to 0.001" | Tumbled | Mirror-Like | 10 | 00000000 | 0000 |
1/2" | -0.001" to 0.001" | Tumbled | Mirror-Like | 5 | 00000000 | 0000 |
9/16" | -0.001" to 0.001" | Tumbled | Mirror-Like | 5 | 00000000 | 00000 |
5/8" | -0.001" to 0.001" | Tumbled | Mirror-Like | 5 | 00000000 | 00000 |
3/4" | -0.001" to 0.001" | Tumbled | Mirror-Like | 1 | 00000000 | 0000 |
7/8" | -0.001" to 0.001" | Tumbled | Mirror-Like | 1 | 00000000 | 00000 |
1" | -0.001" to 0.001" | Tumbled | Mirror-Like | 1 | 00000000 | 00000 |
1 1/8" | -0.001" to 0.001" | Tumbled | Mirror-Like | 1 | 00000000 | 00000 |
1 1/4" | -0.001" to 0.001" | Tumbled | Mirror-Like | 1 | 00000000 | 00000 |
1 3/8" | -0.001" to 0.001" | Tumbled | Mirror-Like | 1 | 00000000 | 00000 |
1 1/2" | -0.001" to 0.001" | Tumbled | Mirror-Like | 1 | 00000000 | 00000 |
2" | -0.001" to 0.001" | Tumbled | Mirror-Like | 1 | 00000000 | 00000 |
Dia., mm | Dia. Tolerance, mm | Appearance | Pkg. Qty. | Pkg. | |
316 Stainless Steel | |||||
---|---|---|---|---|---|
Metric | |||||
2.5 | -0.013 to 0.013 | Mirror-Like | 250 | 000000000 | 00000 |
3 | -0.013 to 0.013 | Mirror-Like | 250 | 00000000 | 0000 |
3.5 | -0.013 to 0.013 | Mirror-Like | 100 | 000000000 | 0000 |
4 | -0.013 to 0.013 | Mirror-Like | 50 | 00000000 | 0000 |
5 | -0.013 to 0.013 | Mirror-Like | 50 | 000000000 | 0000 |
6 | -0.013 to 0.013 | Mirror-Like | 50 | 000000000 | 0000 |
7 | -0.013 to 0.013 | Mirror-Like | 25 | 000000000 | 0000 |
8 | -0.013 to 0.013 | Mirror-Like | 25 | 000000000 | 0000 |
10 | -0.013 to 0.013 | Mirror-Like | 10 | 000000000 | 00000 |
12 | -0.013 to 0.013 | Mirror-Like | 10 | 000000000 | 00000 |