Also known as line-shaft conveyors, these are driven by a drive shaft and round belts. The drive shaft continues to run even when the accumulation of packages may cause some rollers to stop turning. Conveyors can be hardwired for material flow in either direction. Only straight conveyor sections contain a motor and can power up to 60 ft. of conveyor extensions on either side.

Note: Capacities are based on an evenly distributed load. Use a stand at each end for straight conveyors and extensions. Add an additional stand in the center to increase capacity. For 90° curved conveyor extensions, use a stand at each end plus a stand in the center. Connected conveyor sections share a stand. The length of the material you’re conveying should be at least three times the roller spacing.

For technical drawings and 3-D models, click on a part number.