93 Products

Design a stack light with your choice of light pattern and color. Start with a base, then add up to five modules total—twist and lock them together. All components except for replacement bulbs meet NEMA 4X for protection from corrosion and washdowns.

Sound module must be placed in the top position.

LED bulbs last longer than incandescent bulbs and provide years of maintenance-free operation.

Mount these lights horizontally or vertically in places where a tower will not fit. The LED bulbs provide years of maintenance-free operation. Lights meet IP54 for use in environments with splashing water.

Choose from seven colors, including nontraditional colors such as magenta and turquoise, for a custom four-light stack light. Assign colors by pushing your machine's wire leads into the spring-clamp terminals in the light's base. As your operations change, update the colors by opening the base and rearranging the wire connections. Lights have LED bulbs for years of maintenance-free operation. They have clear lenses, which are helpful in bright environments where it can be difficult to see whether a light is on or off. They meet IP66 for protection from high-pressure washdowns.

Use these lights in tight spaces in place of a tower. They emit three colors from a single lens. Color is selectable. Lights have an LED bulb that provides years of maintenance-free operation. Rated NEMA 4X for protection from corrosion and washdowns.

For technical drawings and 3-D models, click on a part number.

Give a signal with the push of a button. These lights have a control box with a button for activating each of the three light modules. The LED bulbs provide years of maintenance-free operation.The light modules meet IP54 and the control box meets IP20. They cannot be sold to the regions listed due to local energy efficiency requirements.

Mount the light by bolting the included bracket to a surface (fasteners not included) or clamping it over a surface such as an office partition or workstation. You can adjust the height of the light by using either the included 3 1/2” or 11 3/8” mounting poles.

Mount the control box using the included tape with adhesive on both sides. It connects to the light via a 4-ft. connecting cable.

For technical drawings and 3-D models, click on a part number.

This light emits three colors from a single lens and can be mounted in tight spaces where a tower will not fit. Color is selectable. Light has a quick-connect four-pole M12 plug that makes it easy to hook up and configure and an LED bulb for years of maintenance-free operation.

Use the DIN-rail-mount bracket (sold separately) to mount the light at any angle on a DIN rail.

For technical drawings and 3-D models, click on a part number.

The quick-connect four-pole M12 plug on these lights makes them easy to hook up and configure. Mount the male thread on the bottom of the light through a hole and then secure using the included nut and sealing gasket. Lights have LED bulbs for years of maintenance-free operation. They meet IP65 for protection from washdowns.

These lights have LED bulbs for years of maintenance-free operation and can be wired as either continuous or flashing. The beep or buzzer alerts workers when they're outside a direct line of sight. Lights meet IP65 for protection from washdowns.

Replacement mounting pipes can be cut to length. Use them to lengthen the existing pipe or to replace it entirely.

Good for tight spaces where a tower of lights won’t fit, these emit three colors from a single lens. They have an LED bulb for years of maintenance-free operation. The buzzer alerts workers when they're outside a direct line of sight. Rated NEMA 4X for washdown applications.

For technical drawings and 3-D models, click on a part number.