Empty and fill your tank with a single device—this dual-level switch includes two float switches that actuate at different levels. Mount through a threaded connection at the top of your tank.

Install these switches into an unthreaded hole at the top or bottom of your tank and secure with a nut from inside the tank.

Install these switches into a threaded connection in your tank wall from outside the tank.

For use in locations with flammable gases and combustible dust, this switch is UL listed and CSA certified for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G.

Empty and fill your tank with a single device—these dual-level switches include two float switches that actuate at different levels. Mount through a threaded connection at the top of your tank.

Install these switches into a threaded connection in your tank wall from outside the tank.

For visual monitoring and easy access, these switches are housed in a clear acrylic reservoir that mounts to the outside of your tank.

These switches are CSA certified for hazardous locations.

Install these switches through a tank wall.

Use the included bracket to mount these switches to the inside of your tank.

Designed for use in areas where flammable substances are present, these switches are CSA certified for hazardous locations.

Mount these switches through an unthreaded hole in your tank wall and secure with a nut from inside the tank.

A polypropylene float makes these switches buoyant even in viscous liquids.

Connect these floats to threaded float rods.

These floats are untethered by a float rod so they can float freely in your tank.

Use these float valves with water.

These float valves have a temperature range of 35° to 110° F.

Control water levels in spaces where a rod and lever won’t fit; these float valves have an internal float and connect to your pipe.

Smaller than other float valves, these are sized for containers with limited space.

Commonly used in ice-making machines, these valves have floats that rest inside a clear plastic reservoir.

Made of stainless steel, these float valves have excellent corrosion resistance even when exposed to chemicals.

Combine these float valve bodies with floats and rods (not included) to create float valves that meet exact specifications.

Activate your pump in dirty water that contains sludge and sewage.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Vests are fluorescent yellow with reflective stripes to meet ANSI/ISEA 107 standards for high-visibility clothing.

These vests have features such as snag-resistant belts and automatic inflation for specialized work near the water. They are international safety orange with reflective panels to draw attention.